[♪]

Greetings, and welcome to another episode of LGR Oddware,

where we're taking a look at hardware and software that is odd, forgotten, and obsolete,

and today, it is the Danmere Backer:

The PC hard disk tape backup system.

Yeah, that's right, you can back up your data to VHS video tape

by use of this ISA card that works on 386 and up PCs

of the time period. Seriously.

Although backing up computer data to tape is not the most *unusual* thing in the computing world.

Uh, retro computers had cassete tapes that they backed up to or read games and programs from,

and then you still have data cartridge tapes that are used for backup solutions and store tons of tons of data.

But backing up to VHS, now *that* is a new one on me.

So let's see what we got here.

Time to get up close and personal with the Danmere Backer,

with this model also being known as the Backer16 hard disk tape backup system.

It was sold right around the start of 1996 by Danmere Limited of England for $60 US.

And this uses monochrome composite video signals *only* to do its thing either in PAL or NTSC format.

Yeah, there's no audio here whatsoever. It only uses the video signal.

According to the box, it can store up 1½ gigs,

but from what I've read, it actually ranges from 750 megs to 3 gigabytes,

depending on your settings, compression options, and what kind of tape that you use.

Updated models were available through the late 1990s, including one that was a little sleeker-looking.

This was an external that connected via parallel and did much the same thing,

but could store up to 4 gigabytes, same as the later card version, the Backer32.

Now you might be wondering, "Who was this made for?" Well... anyone on a budget, really.

The Backer's big appeal was price and convenience.

Since a VHS tape was around $2 at the time,

a lot less than the $15 or $30 a tape cartridge of a similar capacity might cost.

And of course, you just used your VCR instead of shelling out for anything more specialized.

It also boasted a 9 megabyte per minute transfer speed,

or around a 150k per second,

similar to other VHS backup systems of the time.

And yeah, that means that the Backer was not the only VHS backup system for home computers.

There was the aptly-named Video Backup System for the Commodore Amiga,

and perhaps most notably was the ArVid 1000 series,

which was more similar to the Backer, being that these were ISA cards for the PC.

And they were made in Zelenograd, Russia in 1992 through the mid '90s.

And get this: There was even a group called Transcom that distributed shady software compilations on VHS,

which kind of blows my mind.

However, even with a few points in their favor, Danmere's Backup system never really caught on,

and as such, it's incredibly hard to find one now.

But the company stuck around for a while after giving up on VHS backup systems,

reorganizing to become 4TV Limited in the year 2000,

and working on things like TV set-top box software until the company finally dissolved in 2014.

Alright, let's get to opening this box finally and see what we get inside.

Because I actually purchased this as a new in boxed product although it was opened, so...

Hopefully, it's still all intact.

Let's see here...

We have some floppy disks, that's always nice.

Oh, this one's for 95, this is for Windows 3.1, so uh...

That's good, that makes sense.

So yeah, there's the card itself, the original ISA model.

That is a *ton* of switch commands there for these uh, little jumpers.

Mmm, product license.

"This agreement is governed by English law. It does not affect your statutory rights."

Well, that's... good.

Ehh, get a registration form here.

Envelope you have to stamp there. Yeah, Cheshire, England. I'm sure my English viewers have a sense of pride.

Ah, apparently, this is...

version 1.21 uh, either of the unit or the manual.

Let's see here... "Thank you for purchasing this product."

Uh, you're welcome...

21 years ago.

Yeah, I mean, it's pretty much just kind of plug it in, and install the software that appears,

although,

that IO address guide is uh, rather intimidating.

Oh yeah, and there's some stuff I was wondering about too, like long play.

Looks like it says...

uh, doubles your storage capacity, but in practice, the-

"this facility degrades the quality of the recorded signal," which makes sense.

There's some information on the different uh, video interfaces, impedance, performance, t- things like that.

So uh, that's- that's cool.

Extended options, mmm!

Uses DMA channel 1 or 3.

Ohhhh, that's gonna be fun, yeah.

Yeah...

Now this is the stuff I'm kinda worried about, just curious if it's gonna work.

It uses "DMA channel 1 for data transfer.

If another expansion card uses this channel, you must change the DMA ... setting of that card."

But, that can be switched, either on the sound card itself or through software usually.

*Scoffs* USUALLY, I say, well...

Let's just get this thing installed.

Mmm... that seal.

Not broken in over 20 years.

Aw yeah, that is a fresh card.

Not a whole lot going on here, which...

I mean,

that kind of makes sense, I'm assuming the software is doing a lot of the work.

and uh, well, I'm already fingerprinting that up. Sorry.

These are the two video in and outs and these go to the...

uh, opposing ones on your VCR.

Well, let's hook this up. I am insanely curious to see how this thing works.

So, I am going to install the card into my Windows 98...

capture box here, which is what I do a whole lotta work on LGR on.

It's just tossed together whatever I need at the moment and today... it needs a Danmere Backer.

So you can't really see it too well, but there is one single ISA slot in the bottom there,

*Chuckle*

that I'm gonna try to put this into.

I've never actually insert anything into this because it runs Windows 98 and uh...

*Click*

There we go. And I'm not gonna bother screwing it in because screw that!

A rather important part of this is getting a VCR that is *good*

and I'm going to go with uh, this right here, one of my favorite VCRs, a Panasonic PV40760.

It's just one of my favorite VCRs, both for the way looks and functionality and whatnot.

And that fact that it has this ginormous, wonderful remote. *Chuckles*

It's great!

There we go.

And...

this display is magnificent, and so is this one. I love VU meters like that.

Like seriously, just check this out.

*VHS Insertion Sounds*

Isn't that delightful?

So, I figured that might come in handy for um, absolutely nothing in this case, since it uses complete

video signals and no audio at all, but it makes me happy that they're there.

I'll grab a couple of uh, brand new VHS tapes here from Goodwill.

These are Maxells, uh, a 6 hour one and an 8 hour one.

I think I'm gonna go with the 6 because typically, I have better results with video quality with like lower...

uh, capacity type of tapes, so I'mma go with this one.

And if we need to, I have another era-appropriate thing that also picked up at Goodwill

(Like everything I have is from Goodwill). *Chuckles* Uh, but anyway...

This Recoton Video VHS Head Cleaner, a non-abrasive wet system.

Although curiously, I also noticed that uh Best Buy still carries VCR video head cleaners,

which is pretty great! So if that doesn't work, this one should. 'Cause I literately bought it yesterday.

Brand new. What the heck, Best Buy?

So around the back of the VCR here is where the business is gonna happen.

And it says to use the highest quality composite cables you can get.

Uh, these are the highest quality ones I have uh, from Acoustic Research.

So, one goes into the video in and one goes into the video out.

So I'm gonna stick the uh, blue one here to video out,

and then the red one to video in.

It's a tight fit because these cables are ridiculous...

So yeah.

So the sound card that's installed in here right now is an Aureal Vortex 2

and I believe it does use the DMA that this needs, so I might need to disable that address first, or you know, swap it

to get it to work, I- I dunno.

Let's see if this works. We should just need to put...

*Click*

Oof, wow...

There we go.

And then...

Yeah.

That should be it!

So I guess first up is to see whether or not this is gonna work with... anything.

*Click*

Let us run setup.

It's a delightfully '90s background.

Yes, let us install now.

And I'm glad the disk works because I did not want to try to track down these drivers and software on its own.

Ehhhhhhh, looks fine to me.

Alright, let's see what we got here. We got some uh, some stuff.

Not installed, requires... installation. Well, I mean...

Let's see what we got here, is it even detecting the card...

I'm betting it's not even showing up here because of the sound card, so let's check that.

Typically, I just go into the BIOS and start swapping things around or whatever, but I just removed the sound card

'cause I don't need it for this, so...

While I'm waiting on this to reload, I'm gonna go ahead and get this new tape into the VCR.

*Tape Unwrapping Noises*

Mmm!

*Inhales* Mmm, smells fresh.

*Clack*

*Clattering Noises*

Nice.

*Thud*

'Mkay, here we are with no sound card. Let's see what we - It's still not showing up!

So I've manually made it look for one of these, um...

I dunno about that.

Is it? I- You know, okay, fine, if that worked, awesome!

"Backer is a high performance backup-up

sys-" "Backup-up system?" It really says that?

"Use the video health check menu to verify your system's properly configured."

We'll definitely do that, 'cause I still have my doubts since I just like manually

chose this thing.

Um, okay, let's see here... Video Health Check.

Failed DMA Transfer.

That's what I thought.

Okay, well after some troubleshooting, I figured out what was goin' on, so let's run that Health Check once again.

And uh, we should get an OK with DMA and yes we do!

Seems to be all good.

So what was happening was it wasn't just gonna be conflicting with DMA 1 of the soundcard,

but also DMA 3 of the parallel port ECP mode, so uh, yeah.

I just ended up switching some things around and eventually got it to work, so let's give this thing a shot,

finally, although I'm not entirely sure how. *Chuckles* Let's check the options here.

Why- I- I don't really know, I'm just gonna leave this as it is. Of course, we want NTSC and uh... yeah, this is all fine.

I'm just gonna leave it as default and let's see if we can backup...

Hm... let's start with something like small first, like, let's see...

Crystal Caves.

Yeah.

Approximately 38 seconds to do that, interesting.

Well, let's see if this works.

"When ready, put the video in record mode and click Start."

Starting the recording right here...

and let it go for a couple of seconds to get past that lead-in bit.

There we go.

Pressing start... now.

Okay, so it is writing the tape header.

*Chuckles*

Oh, this is so weird, so it's processing file by file now, we'll see...

"Writing tape footer..." Okay.

"Stop the video recorder," uh, yeah, cool.

Alright, so it looks like it has made this "backered up" .SLG file to let me know what is in theory

*Chuckles*

on this VHS tape.

So we have the options to restore files from videotape or verify.

"Press 'Play' when ready."

Awesome, and there we go.

*Clap & Hands Rubbing*

Let's see what we get!

Alright, got the buffer going...

Playing, presumably...

Come on... Find something...

That error rate thingy lit up, I dunno what that means.

Eh, it's not doing anything at all, um...

That sucks.

Yeah, that did suck, so I started the troubleshooting process, starting with using that Head Cleaner tape,

which made me feel better but actually did absolutely nothing for the process of backing up with the backer.

So I tried other cables, I tried another tape, I switched around the settings in the software, I tried compression,