Name: iPhone Xのティアダウン!- 5分でわかる画面とバッテリー交換 (iPhone X Teardown! - Screen and Battery Replacement shown in 5 minutes)
Uploaded: 2021-01-14T08:49:59.000Z
Duration: 5 min 17 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

様態の副詞

This video will show the basic screen replacement, along with how I swap out the uniquely shaped

battery inside of Apple's newest flagship.

Accidents happen, and things wear out and break.

So it's good to know to how get things back up and running.

Getting into this phone is pretty similar to the iPhone 7 and iPhone 8, but it does

The same familiar two pentalobe screws are at the bottom of the phone.

I'll have a little tool kit linked in the video description for you, along with all

the parts needed to complete these replacements.

After getting these two screws out, I like to warm up the screen a little by softening

the ip67 water-resistant adhesive under the iPhone 10 display.

I'll use a suction cup and a pry tool to lift up on the glass a little and get my metal

pry tool between the plastic edge of the screen and the metal edge of the frame.

Then I can slice along the edge of the phone, just underneath the glass, to detach the rest

When the screen is mostly free, it doesn't pull down this time to unlock, but instead

The ribbons you see on the right side of the phone are extremely fragile, so don't put

Apple did simplify the process with only one metal bracket this time, which is nice of

Still using the same y triple zero screws as previous iPhones.

I'll remove the 5 screws holding that metal plate down and then keep them organized off

to the side because they definitely need to go back in the same hole they came out of.

It was also nice of Apple to put all the connectors in one solitary row for us here in the center.

The connectors we care about during this video are first, the battery connector.

Making sure to use a plastic pry tool when lifting this off as to not short out the battery.

Then we can detach the two screen ribbons, one at the bottom right, and the other at

the bottom left side of the connector row.

And the last guy is for the earpiece and microphone.

This also detaches like a little Lego from the motherboard.

Quite a bit simpler design now that we don't have the fingerprint scanner at the bottom.

These OLED displays are definitely going to be more expensive than the LCD iPhone screens

of the past just because the part itself costs a lot more.

I'll have the current pricing in the description like always.

It does fluctuate with time and will get cheaper as the phone gets older.

The new screens will probably not come with the earpiece attached, so there are 3 more

I'll pull these out, being careful to keep track of the little gold niblet on the top

Then I can fold the speaker down and away, allowing me to pull up the microphone and

These ribbons are extremely fragile, so go slow and be careful.

Now that I have the speaker out, it really does depend on how the new screens ship, but

you might also need to transfer over some of the clear plastics, but that's not too

Historically, Apple has not made things easy for people trying to fix their own phones.

With the old error 51 and fingerprint scanner hardware issues, they've made things pretty

But with this screen we shouldn't have any issues.

All of the phone's face unlocking hardware is still tied to the phone and not a part

With only the display and digitizer connectors left on the screen, we should be safe.

I'll put the screen back together before jumping onto the battery replacement portion of this

It's pretty straightforward with all of the sensors going in the same slots they came

out of and then the earpiece speaker folding over back on top of them.

There's the three y triple zero screws holding everything in place.

Make sure to get that gold niblet back on that center screw.

I'm not sure exactly what it does, but it's probably important.

Remember, the display is one of the most expensive parts of this phone, so be nice to it.

Now let's take a shot at removing the oddly shaped battery.

Since the screen is already off and the battery disconnected, I'll grab the first magical

pull tab at the top of the battery and slowly pull it out from underneath.

These are very fragile, so go slow, plus that sound is delicious.

At the bottom of the battery there are 3 more stubby pull tabs.

These are hard to get at, but if you have a pair of wide tip tweezers, that would be

With my needle tips I'll just grab the edge and then pull it out as best I can with my

If you do fail at pulling out the magical pull tabs, you'll have to commence the Pry

Another trick that might help out is to grab the tweezers and twist the pull tab around

the tip of the tweezers to get a better grip.

And now the battery is out and this is the most unique battery I've ever seen inside

Hopefully the replacements aren't too expensive.

Like always, I'll have them linked in the video description.

Below the battery we can see the wireless charging and the metal frame of the phone.

If you're replacing your own battery, you'll want to use some double sided tape to keep

Personally, I'm going to be opening this phone up more in the future, so I'm skipping my

With the battery in place and the 3 ribbons coming from the screen I'll reattach to that

center connector bridge, I can finally plug in the battery.

I'll test the phone out before adding that metal plate just to make sure everything is

If there are lines going through your display, or it's gray, or nothing shows up, it might

Re-seat those little Lego connectors and try again.

My phone is turned back off and the metal plate slides into place with it's five screws.

All of these are different sizes so they need to go back in the same hole they came from.

Finally the phone can fold shut just like a little book and clip down into place.