Name: カートリッジの交換 - HP ENVY 5530電子オールインワンプリンタ (Replacing a Cartridge - HP ENVY 5530 e-All-in-One Printer)
Uploaded: 2021-01-14T06:36:52.000Z
Duration: 3 min 56 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

This video shows how to replace a cartridge in your HP Printer.

To begin, turn the printer on by pressing the Power button.

Align a stack of paper by tapping it on a flat surface.

Load paper into the input tray until it stops.

Slide the paper width guides inward until they stop at the edge of the paper.

Do not push the guides in so tightly that they start to bend the paper.

To do this, locate the cutouts on the sides of the printer.

Use these cutouts to lift the cartridge access door.

The carriage will move into the access area.

Then, find the cartridge you want to replace and lift the cartridge cover to release it.

Pull the cartridge out of the slot and set it aside for recycling.

For information about recycling your used HP cartridges,

Now, take the new cartridge out of its package.

Pull the tab from the new cartridge to remove the tape.

It is very important that you use the pull tab to remove the tape.

When handling the cartridge, be aware of the electrical contacts and ink nozzles.

Be careful not to touch the contacts or nozzles because touching these can cause clogs,

ink failures, and poor electrical connections.

Make sure you install the replacement cartridge in its correct slot.

Tri-color on the left, and Black on the right.

Hold the cartridge with the ink nozzles toward the printer

and slide it directly into the open slot.

Lower the cartridge cover and push down until it latches into place.

When the cartridge is installed, close the cartridge access door.

A message will appear on the printer's control panel

indicating that a new genuine HP cartridge has been installed.

The next screen will remind you to load paper into the printer.

Once the alignment page prints, lift the scanner lid.

Use the engraved guide next to the scanner glass to properly place the alignment page

with the print side down on the right-front corner of the scanner glass.

An alignment successful message will appear on the control panel.

The printer is now ready for regular use.

You can find additional helpful videos at hp.com/supportvideos

and on our YouTube channel, youtube.com/hpprintersupport.