the Futaba T8FG which I use to fly my Phantom

and I've currently got a

throttle spring kit installed

this is the throttle - one of these type

and throttle springs to 50 percent

it doesn't stay down the bottom any more and

what I'm gonna try to show you here is

how I've got my timer set up to automatically start

and stop when I move the throttle

it'll start when I move the throttle, and It'll stop

when I do the CSC, or when I bring it

to the bottom, which you should never do when flying, so I

currently

I'll take it back to the default

screen, and I'll go to ST1, and what I want to do here

is I want to set 'Start' to J3, 'Stop'

to J3, and 'Reset' to SH. This is J3

and this is SH. It's got SH written next to it - It's a momentary switch, so that it would be good

to reset

I go down to

this, 'Start' push the button...

it's on J3 - go back to ON/OFF

and use the settings: REVerse SYMmetrical

and whatever that means (I don't know)

then move to

'SET', this moves your

throttle. I just have it just above

my mark

and then press Return and that will set it

like that

that means as soon as I move it outside that little black band area

with my throttle its gonna start the timer

There you go

stop

Same

control

and this time

normal LINear instead of SYMmetrical, which means I get a straight line

starting from wherever I put this

and I put it right down to the bottom which means

as soon as I reach that area, then

this control is going to come into effect

you can put it wherever you want

going

last one is reset just got that

assigned to a 'SH'

OFF/ON

Control has no effect until I move it to there

and then it has the effect, and the effect is 'RESET'

so, as soon as I move the stick

it starts, which is what I want

then I can fly around

and then when I bring my stick right to the bottom it'll stop

so if you do that while you're flying you can stop

the timer. And that's RESET. Hopefully

that helps you. Thanks for watching!