Placeholder Image

字幕表 動画を再生する

  • Hey, kids, today we're making a Deco mesh ghost U two's best for creative things.

  • It's cooking and crap.

  • Sting.

  • Hey, kids, today we're going to make a Deco match ghost, and it just needs a few ingredients.

  • I'm using 21 inch deco mash and I've already precut done everything.

  • The first piece is going to be four feet long.

  • The second piece is going to be three feet long on the third piece is going to be two feet long.

  • So we're just gonna use those three pieces you should be able to get.

  • I believe two ghosts out of this.

  • We're also going to use a six inch Styrofoam ball.

  • Now, I couldn't find any sixes, so I found a five and we're gonna make do with that.

  • We're also gonna use some foamy sheets.

  • We're just gonna use one piece of black on dhe.

  • There's no pattern for this, but what we're basically gonna do is we're using 24 millimeter round eyes, the googly eyes.

  • I didn't allow the glued to completely dry before I put it in there.

  • And so basically what I did was I just put the googly eye on top of the foam and I cut around it.

  • It doesn't have to be perfect, so you don't have to worry about that so you can go ahead and do that ahead of time.

  • So you'll need two of those.

  • And then I just kind of cut out a goofy little ghostly smile out of the foamy sheet.

  • They're gonna use some e 6000 glue toe hold everything together.

  • Andi, I went, I had a time and I made my ribbon.

  • I have a boa pom, pom bo tutorial that I can refer you to that you'll be able to make best bow or if you want to make just any boat that you prefer.

  • I used this dollar ribbon that I found at Wal Mart and I used almost the entire amount.

  • So that was three three yards.

  • Okay, so you can use any color, you know, or whatever you want just to put underneath his head.

  • And then we have some pipe cleaners that we're going to use on DDE.

  • That is the end of our ingredient list.

  • So, what you want to do, as with your 40 a inch or the four foot um, length of mash you want to go ahead and find the absolute center of that's once you found the center.

  • Go ahead and put your head in the middle of that on DDE.

  • Gather it.

  • Nice and tightly underneath.

  • Okay, so now we're gonna We have the sides coming down front end bottom.

  • The next piece we're gonna use is being three foot.

  • Okay, let's see.

  • Yeah, that's it.

  • The three foot or 36 inch one.

  • Go ahead.

  • Find your middle on this one as well, and we're gonna go crisscross opposite direction so that it will be just covered like a nice big lollipop.

  • Go over that.

  • Okay.

  • And so now you should have, um, deco mash going front and back side inside.

  • And then your two foot length you will take, find your half, get to the middle on you can place it any way you wish, But I'm just gonna go ahead and do it the same way that we started off with Still have to going down in the front and, um, just one layer going down the side.

  • So now that we have our head all covered up and we have all of our mesh coming down here um I'm going to grab one of the quite cleaners, and as tightly as you can get it in there as tight as you can on Let's go ahead and twist, twist, twist, twist.

  • Okay, so then we can we're gonna make sure that we're able to hang this guy, so we're gonna use another one.

  • But let me just go ahead and put our ribbon on to this and cover this up.

  • So tie him around and around on DDE.

  • I would have liked to have a little bit more ribbon.

  • I think maybe I don't know, we'll play with it.

  • I might add in another, you know, the other one that I have there.

  • So that this cam, right, nice entitling.

  • And then we can play around with the bow, and then we'll get the you 6000 and we are going to attach our eyes to the front of our ghost, too.

  • Yes, we should use a fair amount there because we want to make sure that it's gonna adhere to most of the, um, the deco mash.

  • Maybe I'll try to see if I can't be a little bit more.

  • Here comes the other one and then I have a little, um, overlap here, so I'm not sure how that's gonna work for the mouth here, but we're gonna go ahead and we're gonna try to at here.

  • Has little mouth, squiggly mouth right there.

  • And once this is all dry and I know it's not gonna fall off, we will attach the hanger on him so that we will be able to hang him from our house and have him scare the little kiddies that come to trick it.

  • Eats well, Be that so for the back of the, um, the ghost.

  • What I did was I just attached to pipe cleaners to one another.

  • It doesn't have to be that long, really.

  • But I want mine because of how I know mine hooks are from my house.

  • I have to make sure that this is pretty long and I shouldn't have tied this so tight.

  • You know what I want to do?

  • I'm just gonna attach it like I did Those two right there, just twist on dhe, then bring together and take things and twist can be together.

  • And now I have a nice, great big loop here that I'll be able to hang him from my front of my house.

  • Oh, his I didn't try.

  • I swore.

  • Okay.

  • No biggie.

  • No stress.

  • So there you go.

  • Very, very cute.

  • Deco mash Ghost.

  • Who?

  • I hope you enjoyed this tutorial.

  • If you did, please consider smashing that like button and giving me a comment below.

  • Also, if you haven't subscribed already, please do I come out with videos every Monday and Thursday.

  • Subscribing will make sure that you keep up to date with everything that I am doing.

  • Thanks for watching again.

  • Bye bye.

Hey, kids, today we're making a Deco mesh ghost U two's best for creative things.

字幕と単語

動画の操作 ここで「動画」の調整と「字幕」の表示を設定することができます

B1 中級

超簡単ゴーストデコメッシュチュートリアル (SUPER EASY Ghost Deco Mesh Tutorial)

  • 2 0
    林宜悉 に公開 2021 年 01 月 14 日
動画の中の単語