I love,

laminar flow.

And people send me tweets about laminar flow,

all over the internet, its time to do,

the laminar flow video.

Check this out, big pool.

We're going to see if we can make, laminar flow happen.

I should be able to poke a hole, in this pool,

and get a glassy looking jet,

that comes out this pool. That's what laminar flow is.

It's very orderly, looks like glass.

Okay, so here we go, ready,

three, two, this feels so wrong.

Let's see if we get laminar flow,

no, we don't.

(laughs)

Now I've got a hole in a pool.

Okay, laminar flow is a function of geometry,

obviously I had the wrong geometry.

We're going to try a big spike, here we go.

Oh golly.

Okay. (Laughs)

Alright.

No, it doesn't work.

So my shape's not right.

My shape's not right, what do I do.

Work, work, work, work with me.

Ah, there we go, okay, so.

I got laminar flow right here,

and its going turbulent, right here.

Why?

Laminar flow is a function of the geometry, the velocity,

and the kinematic viscosity,

of the fluid that you're working with.

Right now, my velocity, is not fast enough,

to have laminar flow, because there's not enough pressure,

so if I move it down, I should have more pressure.

So, let's plug this back up,

well now I have a problem.

That's out.

I'm doing a bad job of explaining laminar flow,

what we need to do, we need to go, around the world,

to different places I've observed laminar flow

in the past several years.

And we need to let me show you, various things

that I've seen along the way.

Laminar flow is orderly, all streamlines are parallel,

and there's no mixing of the flow.

It's all like how you would imagine,

water flowing through pipe,

everything is straight and parallel.

Turbulent flow however, is chaotic,

there's pressure fluctuations throughout,

you get the idea.

Engineers have this special term,

called the Reynolds Number.

To try and help predict, what type of flow,

they might be dealing with.

The top of the equation are the things

that describe the flow itself,

like the velocity, the density, the geometry, etc.

But the bottom of the equation is viscosity of the fluid.

Like how thick the fluid is, like water vs honey.

A lower Reynolds Number,

means that the flow is more laminar,

and in my opinion, more awesome.

But a high Reynolds Number means that it's more turbulent.

So if you look at the equation,

you can kinda see what's going on here.

If you have more viscosity,

that means Reynolds Number gets smaller,

therefore the flow is more laminar.

But if you increase the velocity of the flow,

or the size of the flow,

Reynolds Number gets bigger,

therefore you have more turbulent flow.

If you keep Reynolds Number and the mock number the same,

you can make a model of whatever you're trying to fly,

and you can get a good idea if turbulence or laminar flow

is going to happen over the model.

That's exactly what they did with the Saturn V,

this is the big Saturn V right here.

But in order to approximate what was going to happen,

they made a wind tunnel model.

You can use wind tunnel models,

like this little four inch model.

To approximate the flow, over the entire, Saturn V rocket.

As flow comes through here,

and goes across this Apollo capsule,

if the string flickers as turbulent flow,

if it's steady, it's laminar flow.

Check this out. (whirring)

So as we change the angle of attack,

you can see the different types of flow, take place.

It's a little hard to see it, with just the strings,

but Sarah-Kate, who goes to school with my daughter,

made an awesome science fair project.

You've got to see this.

Okay, to demonstrate laminar flow and turbulent flow,

this is Sarah-Kate, science fair winner, extraordinaire.

Right, - yes sir.

- [Destin] You going to show us how it works?

So NASA Glenn Research Center,

and you just built it from the plans?

- Yes sir,

- [Destin] That's awesome.

- [Sarah-Kate] I had parental supervision and guidance.

So you have to pick your scent.

- [Destin] Frankincense, dragons blood, that's pretty legit.

Orange, that's got to be good.

That's a weird smell.

- [Sarah-Kate] Okay, now I'll blow them out.

- [Destin] Okay, and so,

that's going to make the smoke come through,

this pipe right here right?

- [Sarah-Kate] Yep.

Now I'll turn on the fan.

(fan whirs)

- [Destin] So got to get the light correct, right?

- [Sarah-Kate] Yep.

- [Destin] Okay, so that's pulling it through,

should we be able to see it, yet?

- [Sarah-Kate] Yeah, you can already see it.

- [Destin] You can already see, oh what the heck.

You sure can,

look at that.

Oh that's cool, look at that.

Okay, cool, so, laminar flow,

are the straight lines that go across, correct?

- [Sarah-Kate] Yep.

- [Destin] So that's a zero angle of attack?

- [Sarah-Kate] Yes.

- [Destin] So give me a real high angle of attack.

There you go, look at that.

So we're getting flow separation,

along the backside here,

and we're getting turbulence back in here right?

- [Sarah-Kate] Mm hmm.

Let's see.

- [Destin] This is like

the coolest science fair project you've ever done?

- [Sarah-Kate] It's the only science fair project

I've ever done.

(laughs)

- [Destin] Look at that turbulence back there.

So ultimately, what were you trying to learn here?

- [Sarah-Kate] Basically, I was just trying to learn

more about, airflow shapes, and flow separation, and stall.

And make a good visual representation of all those things.

- [Destin] Well I think you accomplished that.

Look, man, look a it from this angle right here.

You can see, you can see the separation back there.

Look at that.

That's a really good angle.

This is an awesome experiment.

Are you going, you're going to regionals now right?

- [Sarah-Kate] Yes sir.

- [Destin] You're going to win.

Do it.

If you've ever been to the Detroit airport,

there's an awesome fountain,

like right in the middle of the whole concourse area.

And you can see laminar flow in action,

programmed with computers.

- [Destin] It's the awseomest fountain,

let's go look at it.

What do you call this flow?

That flow right there.

- Laminar flow.

- [Destin] What's it called? - Laminar flow.

- [Destin] Laminar flow,

some daddies don't teach their kids cool words like this.

- Oh, I already know alias.

- [Destin] Yeah?

- And all that other stuff.

- [Destin] You don't appreciate this.

- I do.

- [Destin] You just don't, you just don't appreciate, what.

You just don't appreciate laminar flow.

Let's go.

(phone buzzes)

Dude.

Did you get the funnel?

Yep, alright, so here we go.

Thank you.

Ow my finger.

Okay there we go.

This is a Go-Pro right?

So what's happening is,

the flow is going into the funnel,

and as the flow goes in there.

All of the streamlines of the water, are lining up.

And so its flowing parallel right,

once you get all the flow going in one direction.

You can divert the laminar flow, and the streamlines,

stay in the same orientation.

So look, you can start to make things like,

sheets you see that?

Look at that.

It's working.

That's got ridges on it.

(gasps)

Okay, look at this, so if you get

all the laminar flow going in one direction.

You can put things that,

look at that it made a bubble.

Okay, you can make a sheet, like a sphere, of laminar flow.

Okay, so there's a really cool children museum,

in Chattanooga, that I found this,

and I put my phone up under it.

Look at that, I could put my head in that.

That is beautiful.

This is probably my favorite kind of fountain.

And the cool thing about it,

is the flow rate at the center has to be high enough,

so that, it's glassy,

like you have enough flow to make a complete covering.

But it's not too high,

where you go turbulent at this location right here.

Right there.

See it's wanting to go turbulent, but it's not.

And as, the water, drops off.

There's enough volumetric flow, to cover and make it glassy,

360 degrees here.

Which is awesome.

So what I'm going to do, is put my phone in there,

and see if we can see through the laminar flow.

Let's see if it's smooth enough.

Okay, you ready?

Another thing I like to think about,

is the inverse square law,

and the flow rate as it comes out.

Anyway here we go.

(muffled water flowing)

That works doesn't it?

So the next question is, can you hear me?

So it's totally engulfed with water,

I don't know if you can here me or not,

but the microphone is probably full of water at this point,

but let's try this.

Can you hear me better now?

I like this a lot.

(water flowing)

I like that a lot, okay.

It's really fun, when you're 30 something years old,

and you have to wait for the two year olds.

So you can do you're little fluid experiment.

I love laminar flow, and I want you to love it too.

Prince Rupert, you're in my light, move.

Thank you.

Okay, so, the thing that I think is so neat here,

is if you think about the volumetric flow rate,

if it's not enough,

you don't have water go all the way to the bottom.

You see how it's breaking up here.

But, if you control all of these variables, perfectly,

you can make a fountain do exactly what you want.

This is beautiful.

I really respect people that design fountains like this,