Just two cents here.

And I promise you, in our review of the 5600 x t from AMG that we would talk about over clocking because one of the way is that you're able to get a $299.2060 card here from the VJ the KO and to keep the price around 279 to $289 for the 56 5660 is you have to shave some things, if you will.

We're talking about some of the same and how they affect over clocking.

We're over.

We over clock around here so we'll talk about that.

End 60 is proud to announce they're all new crack in Ze Siri's Aereo, featuring a 2.3 inch, 24 bit customizable LCD screen, allowing the users to completely customized the look of their cooler.

Capable of displaying useful system info and temperatures, the LCD screen can also play gifts and custom images, giving users the freedom to truly customize their experience.

To learn more about the NZX T crack in Ze Siri's head to the link in the description below Okay, so we're gonna kind of show you how the over clocking performance between the $299.2060 ko from DVD A fares against the $289 5662 cars that were never designed to be pitted against each other but ended up that way because of the V bios improvement to performance on the 5600 x t After it completely dominated the 16.

60 T, Iet set its sights on the 2060 because the 2060 had a price reduction, both from the Founders card and this new card from DVD A the KO.

I have a founder's card sitting here on the bench.

I'm going to call out some B s right now.

This is not a $299 card, it says.

Notify me on the website.

It'll probably say Notify me for the end of time now because I don't believe for a minute, and video can actually make any money selling these at $299 when the a partner version of it has a much cheaper, less robust cooler on it.

It's not a bend GPU Um, and it's just it's got a lot of features stripped out of it.

That cooler alone on the founder's card is extremely expensive.

We said No review that the 2060 ko from PGA has a locked power limit, but so what?

You can sew over clock.

Yes, you can.

But the problem is, a lot of the perimeter is that keep cards from performing outside of their speck is, you know, parliament temperature and then obviously core core voltage.

But you can't even adjust core voltage on a video card.

You can just a slider.

That kind of allows the Maxwell to get a sooner clock, but it doesn't max out the voltage or put any higher than what's written to the BIOS.

Those old days have be able to actually admit little Mila bolts are gone.

So the other thing is obviously gonna be It's the Silicon lottery.

How well the core is gonna respond to adding it more megahertz and pushing it farther.

So we're gonna demonstrate some of that today and see how the 2060 ko versus the 5600 x t vs the same price 2060 over here, Founders edition from a video does.

So I'm using three utilities that are free to demonstrate today, which means you at home can download these and see how your cards fare on your own.

Now, this is not an over clocking tutorial.

I'm gonna move someone through some of this pretty quickly, so forgive me if you don't understand everything.

I'm saying the benchmark chart that we're going to show you have already done all the testing.

Well, at least paint the picture for you, but I've done a lot of these over clocking guides in the past.

It's the same thing that applies today.

So in video graphics cards and Amy cards now use a GPU boost type of an algorithm.

Basically, it says, these are Max clocks.

In fact, I could show you that right here the three utilities were using our heaven.

It's unity in Heaven, which is a benchmark.

It's a DX 11 J.

That's really, really old.

Yes, I know, but it's still a way to stress the card, and that's all we want is to stress it using a Masai afterburner, which, despite popular belief, does work on Andy.

Card's just fine.

You don't have to use a M D radio and software A and be ready on software gives you some extra functionality.

Which day today didn't affect performance in any positive way whatsoever?

It's still kind of a shitty buggy software in my personal opinion.

And then we're also using G.

Pusey.

G.

Pusey reads the BIOS.

It'll tell you everything about your card memory bandwidth memory bus with We could see the GPU boost speed so you could see the GPU clock is 13 65.

That's when it just is out of tootie mode.

It goes right to 13 65 but it will go to 16 80 automatically as its boost clock.

So when it sees a load for games and stuff to go right to 16.

80 But if it has additional voltage available to it as additional power limit available to it and it has additional, Um, well, I guess those two things, then it will automatically start to self over clock itself.

So that's why you're seeing.

In fact, I'm gonna refresh this quick reset.

That's why you're seeing 1860 75.

It's gonna kind of bounce around megahertz and not 16 80 because it found that based on these particular perimeters itself, over clocked to 18 75 which is obviously 195.

Major retired in the 16 80 boost clock.

So it's already done a lot of over clocking for us.

Well, obviously we can push this farther except for the case of this card, because we have no additional power limit because, like I just said, those three things are those two things it's really looking for.

Temperature and power limit are going to limit how far we could go on a core voltages another one.

But like I said, that's not even worth talking about this point because we can't control that.

But it is a limiting factor.

But J there's a core voltage slighter.

Yes, all that does is change the percentage available to the core at a sooner clock.

If we were to really raise the slider, check this out.

Nothing happens because all we're doing is telling it go that voltage lower than this, so it could have started doing around 1516 100 So that's why people refer to it as a placebo slider.

If you were having crazy instabilities at a lower court clock, then that might help you, but that's rarely the case twice, quite honestly.

So we're using heaven.

It's frozen right now because I have it set toe.

Just look at it really difficult scene to render its got.

The boat's got all this test elation, but J it's not moving.

You're right.

It's not moving, but it's still rendering the scene 100%.

Even though nothing's moving, it's still refreshing and re rendering the scene every time it draws a frame.

So that's why our F.

P s is really consistent, which allows us to more accurately see what changes affect performance.

So the first thing we're gonna do right here Yes, we're going to see what is limiting our performance right now.

What's keeping us in 18 75 or bouncing between 18 60?

So they go to G.

Pusey and go to sensors.

Perf cap.

Reason down here tells you why you're limited.

So the three reasons that we're staying at this clock speed right now is because of power limit.

So again, that's that power limit of the total amount of power that a graphics card is able to draw.

That's the fans, the lighting, the core, the memory, the V R.

EMS, whatever is on here.

You have a fan plugged into a header in the back that draws power.

So it's the total power draw that's that's able to be drawn from the card.

So we've hit that limit.

The other two here is Veer L and V.

Ops of IAPA's.

Specifically the amount of voltage to the core.

Basically, we are power limited right now is what this is telling us.

So Okay, Well, what if we max out this power limit?

Will that help anything?

So all I did was slide it all the way to the right because more power means more heat.

It's linked with temperament.

You cannon link it.

There's no reason to where, As you can see, it is bringing our temperature target up as well.

So 83 c is where it will max out.

Now, that means if we hit that, it'll reduce these core clocks and such to keep it cool.

We're gonna raise that obviously to 87 hit apply and we went from 97% TDP to 100.

So you could see now we're no longer power limited because it's Max is 118 were only sitting around 100 and 100.8.

But we still have voltage limitations that are keeping us from going any farther.

Well, we could still manually over clock this.

We could still push the core, which is kind of weird, You would think.

Well, there's enough voltage.

Well, how can you push it farther?

Well, Max, voltage does not also determine your max core clock.

It only determined you, Max core clock if you no longer have enough voltage to keep the core stable.

There's a lot of head room ms there.

So even though we're gonna be stuck at the 10 43 weaken over clock this, I already know that this card is able to do 1 75 bringing our core clock up to 2000 and 40.

As you can see right now, we're right back now to power.

And then the voltage limiting our cart.

And we can even over clock our memory.

Check this out.

750.

I'm going far because it's Samsung, and I know it can take it.

Same voltage.

Little more temperature are cork Lakas you Cassie came up significantly in sowed our memory, and we're at 109%.

And then we can Max out our fans to keep the temperature's down as a fan comes up like that now, up into the teens, which shows you just how much power fans can actually take.

And that's when the reasons why water cooling is superior because you don't have to get power to your fans, which means you can get one extra boost.

And what you'll notice, too, is as this temperature comes down and I happen to know that under full load, um, were able to get about 57.

Seas are max temperature.

See how that's starting to come up slightly because again, core clock and temperature are directly related.

There's there's bins that say at this temperature max speed of this as it comes down, it goes, Hey, more max speed.

So we're gonna go ahead and throw the 2060 ko in there now to show you how different the experience is when you don't have access to the power limit, so we can't increase the power at all on this.

Now we can still increase the core and a temp limit one of the things that we've I've noticed with over clocking this card in the benchmarks that you're about to see is I couldn't go that far with it.

In fact, plus 75 or so in like plus 400 I'm putting the fan toe like to point out to.

This is a duel cooler fan, but it's already at 60 60 67 c.

It'll actually hit 71 see when over clocked with the fans of 100%.

That's again because the cooler design came off of a lesser card.

Put on a higher card that was never designed for this much heat that this chorus generating.

Remember, we don't have our tea core's going or tense records.

They're just the code.

Of course.

Right now we're at 1935.

Remember the other card we were hitting?

2040 2055?

And because it can't pull more power, it added more core clock by reducing voltage.

So it was kind of like it's like a weighted system, right?

So you, if this is your max, you can't raise this.

That has to come down because it has average out to where the maximum is and That's what we're dealing with on this card right here.

So even though if we look at the graphics card here, we can see we've got more boost going here like 17 75 and boost of 18.

30 and the GPU clock at 14.

40.

And all these higher numbers technically, that our reference card Watch what happens if I try and push this any farther right now?

So I'm plus 100 on the core.

Nothing weird happening there yet.

What's this 1 10 Oh, that.

See that?

Do you see all of his reign Bowie stuff?

Look at our core clock.

We're nowhere near where we were in the reference card.

We're getting all these artifacts now.

These are artifacts someone might look at and go.

I'm getting memory artifacts.

No, no, because this is that's core artifact.

If I come back here and I go zero in the memory, they're still there.

That is because, as you can see here, if we go back to our sensors were continuing to keep the voltage low as we're pushing the core higher asking Maur task of the core without it getting the power it's gonna need.

But do your voltage lighter doesn't matter what, 100% it's not going to give us any more.

So what you've lost by going with the super cheap 2060 and this is nothing gets DVD A.

This is what they have to do that because of the pricing of the card in the GPU and all that sort of stuff the core, these air, the cut, the corners they've had to cut to give you a very basic plug it in very limited over clocking experience versus this guy.

That's why this guy at the same price.

Although it's a better card, it's not gonna exist.

Aimed is not your savior, though.

Let me show you what's wrong with this one.

So it's a little different when it comes to Andy.

In fact, look, remember, I talked about in my review how the fans would just the card just melt down.

The fans are not running right now.

Look, it thinks they're running 100% so it's not reading the fans at all so, and check this out.

If I come in here, then I can sort of play around with fan right?

Apply changes.

No, do that.

I'm manually told to go.

And it's not so like the card is going to just continue to melt.

There it goes, All right, that was really delayed so I could do the same thing in M s after murder.