Name: 今まで見た水冷ケースの中で一番いいかも！？ (This might be the best watercooling case I've EVER seen!)
Uploaded: 2021-01-14T09:44:11.000Z
Duration: 13 min 36 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

程度の副詞

Five years ago, Fantex released a case that sort of just shipped the industry.

It was a giant case that could fit tons of radiators and tons of water cooling or air cooling and tons of drives or whatever you want.

Well, fantex is kind of doing it again, this time in 2019.

Costume or 54 X Game, he had said, is now available at Drop.

The lightweight design and custom fitting sling headband.

Sure comfortable Prolong to use for those long gaming sessions while the drivers deliver surprisingly clean sound, Making your favorite game sound awesome.

Designed with its great sound, isolation means he won't disturb your neighbors.

While the excellent value mean you won't disturb your wallet to learn more, click the link to the drop below.

I still have my entire mine through Primo ever built in it.

I wanted to, but then the right build never came along for it.

The Lexx is a huge success, and so the luck's too Oh, no, is Ah, it's probably, I would say, how they anticipated.

I went to grab this box on the top right here, and I went with my fingers.

Here is the box accessories that you'd get with it.

And you can always tell by a manual how, like much pride they take in a products clearly manual full color.

And for the record, this is this is a truly, uh, new one boxing for me.

I have not on boxes or even seen this chassis in person yet.

So we're looking at for the first time, I assume this is gonna be a vertical mounts, and then we have got Okay, Dr Cages here.

So remember I said how the into Primo was all about Dr Cages.

So with Lux and inside this guy here, we've got just like Phil loved about his shift.

There we are, just doing an unboxing and a look because I don't normally do in boxing's.

But this these are the kind of is it the kind of reasons why people watch my channel, the CD screw around.

Okay, so it says open from that end, uh, so foam soft enoughto Get Linus hard, if you know what I'm saying.

The funny thing is, this is a fairly large chassis, but it's it's a full, so it's a full tower.

It's not a mid tower like a lot of cases are these days.

Texas, like unapologetically like this is big because we want a big case, but it's not as big as the elite.

So what kind of take a quick tour around the outside of the case?

But you can see that this is definitely derivative from a good five or six years ago when they came out with, like, the into Primo.

The into Serious has always been a fan favorite, but they've changed quite a bit to make it just a large open chassis.

But what I love about this is there derivative from the original chassis is they didn't really shy away from any of that.

The big glass piece on the side is nice, because the one I have the the end through Primo was a steel door, which was a panel that popped off and had plexi glass window, which was kind of a triangle shaped like another piece right there that showed the logo through there.

They even have a tempered glass side panel to show off your SST.

So if you have one of those fiery SS D's from hyper X, well, you could see it, Gloria, do their due to heat and led ese, This would be kind of a water cooler is the dream simply because of the amount fans you could fit in there So you could see that there you could fit 31 forties or 31 twenties.

See a plenty of air flow inside of here, and then a nice, healthy channel on the sides to allow that air flow out Thes have been expanded over time.

They have definitely gotten wider, where some of the some of the older cases didn't have nearly enough airflow when it comes to letting air out, and they've definitely changed that you've got a very sexy, milled power button right there that lines up with the I o on the top of the case.

That's just kind of a spring loaded little plastic deal that will, uh well, that's the power button that comes off just like that On the front of it at Fort 81 234 120 millimeter spots most chassis czar Not gonna allow you to fit a radiator like this in there.

That All right, So here's what we were able to fit.

We were able to fit a 400 or 445 millimeter 360 millimeter rat on the bottom.

The same one on the top of 45 mil thick 360 on the top and a 30 mil thick for 80 on the front.

A lot of Okay, um, there is This is ah, vertical mountains for the power supply.

So by doing it that way, they were able to just really give you a lot more room on the bottom where the power supply was horizontal.

It would cut into that bottom space, and we wouldn't be fitting that bottom radiator.

So you got a built in fan controller, which is very reminiscent of fantex.

You've got paedo bm wire right here in the control, five P W M fans and three DC fans on there.

So keeping things nice and tidy with a central place to hook up your fans and then the wires are great to go.

Three state, uh, Dr Slides here so you could add three state of SS D's or hard drives or any two and 1/2 inch control like an RGB controller or whatever.

You've got this nice panel right here to cover up your wires and keep them nice and pretty even though you can't see them.

What this does is it ensures that as long as this thing closes, so will your side panel.

So you don't to deal with the whole squishing of the wires to get him to close.

You've also got some RGB controllers right here because there is RGB on this.

I would assume somewhere Yes, right on the edge, right here.

Those rgb So this comm plug in to your motherboard.

It's missing the 3rd 1 We've got to front side USB three point.

Oh, plugs on here because we look a front panel connectivity to USB three point type A because, as you know, those headers can only due to its science.

We've got RGB button reset button power buttons on the top, got a front panel headers out there for our headphones and microphone.

And then we've got these little panels that pop out right here.

You can actually mount another drive to this so you can put the drive on here mounted flat, and then you could have room for even 1234 Maur drives on here.

Or in our case, this could be used for reservoir amounts.

If you decided not to do like a radiator mounted reservoir, which would be really easy in this chassis Was all the room you got here.

And I'm looking at the screw holes now and I'm thinking thinking that Oh, man, we found something.

We also found something no one's really gonna own.

Just actually the X 299 dark motherboard that still is vastly gasoline all over when I was doing like liquid nitrogen and all that sort of stuff with it because of the acetone for doing dry ice.

But suddenly the TX board looks a heck of a lot smaller.

So as you can see it's mounted, it's not interfering with the radiator.

I would highly recommend plugging in your power connectors and then doing the top rate here.

But as you can see, we got plenty of room here with our romance.

Like I started a show with cable management earlier is as I separate some of the front panel stuff.

Uh, this is 12 volt power, these air for the built in lighting and stuff.