But what's cool about this original version that it also comes with some really cool, big, heavy weapons, which, to be fair, are sold separately.

So even if you did get the off white version, you could still buy the weapons separately and could just do it that way.

But this version is still pretty cool.

And so, as always, guys big thank you to s a Gundam store.

For their support.

Do check out the link to their site down below.

Check out the different code.

Book your stuff for a mama's girls.

We got me device and, of course, all sorts of Bandai products there as well.

You could get 10% off everything they're using.

The coupon codes are really is 10 now, so let's check out everything that she comes with its first up Once again, we got this set of waterside decals here for the eyes.

We've got those eyes available there in blue or red.

If you want to use these waterside decals, we got a couple of little frame arms grow logos there, a couple of warning logo. 00:00:58.810 --> 00:01:2.570 Those are also in with either blue or red highlighting on those. 00:01:2.570 --> 00:01:5.010 And in these cute little animal faces, they're kind of angry. 00:01:5.010 --> 00:01:9.210 Tiger Bunny there and a teddy bear head for some markings on there. 00:01:9.210 --> 00:01:20.620 If you want to put those on for hand options, we've got the usual set of close fists here, as well as extended trigger finger hands, regular holding hands open expressive hands and open resting hands.

So, the usual layout of hand options for this kit and then, as usual, some very nice pre printing here for the faces.

So you just got this kind of slightly looking off to the left face here.

Then you've got a similar one here.

We're just like looking off to the opposite side, off to the right instead.

And the 3rd 1 is also looking off to the left again.

But this one is sort of cracking a little tiny bit of a smile there, so showing a little bit of emotion, at least in one of the faces.

And obviously we have this stand here included for this.

So with the base figure, this works plenty.

Well, once we get the big, heavy armaments onto their, it might start to maybe not work so well.

But we'll find out in a moment. 00:01:53.900 --> 00:02:1.250 We have a set of these, which are replacement parts for the arms, for you to be able to plug on different frame arms, kid arms onto this. 00:02:1.260 --> 00:02:5.410 Some of the frame arms robot kids feeling to replace the arms got thes replacement joints. 00:02:5.410 --> 00:02:11.030 For that, you've got the go rise knife here as well as the connector piece for that for connecting it onto the kid.

This is actually, technically a leftover.

Partly, you're not supposed to use this kid, but it's included.

So, obviously, why wouldn't you use it?

We've got these optional parts that are once again just carried over from the original go right optional leg and arm, which is fixed.

Posed like this, which are meant is kind of depict that she's like taking off the armor here.

So show you that, uh, in use in a moment.

Then we've got our main weapons here.

We've got two of these.

So this is just the pile driver option.

So you've got just this simple, cool effect on that.

You've got some major steam line on this, but overall, the detail ing on this is pretty nice.

Straight out of the box, though.

Just mould it all in black.

They're not going to be most Ah, interesting looking just without any sort of coloring on there, So definitely doing a little bit of painting on these two.

Always bring out some of the details or at least a little bit of dry brushing or something. 00:02:57.800 --> 00:03:0.480 Just to bring out the details would be pretty nice, I think. 00:03:0.480 --> 00:03:0.870 So. 00:03:1.080 --> 00:03:3.110 You got a couple of connector parts for this? 00:03:3.110 --> 00:03:7.050 These parts that will connect on to, like, the arm of a different breed. 00:03:7.050 --> 00:03:10.810 Mosquitoes think they're actually not used with this Gets really actually will take these off.

And of course, we do have this handle here as well, which you could use, but it's also not really It's not shown in the manual to use this handle.

I think you could but you probably would have some weight issues.

Like holding that in hand.

It's kind of like kind of holding it a little bit weird, eh?

So what you have for connectedness onto the actual girl here is a set of these little character pieces.

So, you know, just take out that handle here, use this one here instead.

And isn't.

This will plug into the back of the arm from the back here.

You've got that little hole, then just plugs into there and actually holds up pretty well.

Now, let's give it a little bit of weight test, see if she can hold that straight out and yeah, surprisingly, uh, I mean, despite this being pretty big, it doesn't wait all that much.

So the joint is holding up.

It seems solid enough to be holding that up like that.

That said, the pile driver, I think is probably the lightest of the options Are other options here before that? 00:03:59.740 --> 00:04:3.690 It does also have a spring action in it so you can push this back and it won't stay back. 00:04:3.690 --> 00:04:5.690 There is this little bit here on the top of the press down. 00:04:5.690 --> 00:04:5.800 See? 00:04:5.800 --> 00:04:7.620 Push this back press that down. 00:04:7.620 --> 00:04:9.950 And then that will stay, like, cocked back like that.

And then you press this again and that will shoot out of there like that.

There we go.

Like that.

Sorry, wasn't pressing right like that?

There you go.

So you kind of have You have to hold it just right.

So you're not pushing, helping the wrong way.

So I'm trying to hold it the right way once a day, and you just push this back and that will pop out of their them.

All right, one more try.

Push this without obstructing at all.

There you go.

There.

You guys could see how that works.

Then, to change this, all you do is simply bring that back.

And then you can just slide this part here at the front, out, and then we have a couple different options for that.

So are other option is this big punching fist, which again is it's all my little one color.

Tonight's molded silver looks pretty cool.

At least it gives you two different colors to this Now instead of just the one. 00:04:53.890 --> 00:05:3.640 The hand does have a slight amount of articulation in it and that you could kind of like, rotate the thumb back and extend the fingers out like that's if you wanted to have it look like it's sort of like grabbing onto something. 00:05:3.640 --> 00:05:6.340 Or you could maybe even have it actually holding onto something. 00:05:6.340 --> 00:05:8.480 I suppose if I could hold onto the part here. 00:05:8.480 --> 00:05:10.320 Sorry about that s that.

This rotates like that and you have the left and the right version of that all.

You could swap it to both be on the left or both be on the right.

That's by replacing this part here on the side.

So if you wanted to give, like, one in the right hand and then the other one also on the right hand to a different kid or something, you could do that.

So it's able to be used on either side.

Doesn't matter.

But the way that has you build them in the manual is to make one for the left and one for the right.

But one can also have some spring punching actions.

Let me try to not mess this up this time.

Here you go.

There you go.

Like that.

So that just punches like that.

There you go.

Pretty cool on then our third option is the claws.

Got two sets of these claws Options.

Actually, this is my favorite.

I prefer these.

So these will fold out like that.

And these don't really want to stay in there very well, kind of like that.

But they're kind of very loose in there. 00:05:59.780 --> 00:06:8.880 Either that or I'm doing something wrong, But you don't really stay in there too well, so maybe just adding some paint or something in there obviously will tighten that up. 00:06:8.890 --> 00:06:10.470 They may have been with the spring action.

It just shoots those out like that.

I suppose that's me.

Why these don't plug in their super securely.

Because with this, like piston there, that springs out.

It just springs out this main center part there instead of pushing out the whole thing like it does with the other two options, but kind of cool.

But if you want this to just be stuck in there, you'll have to glue it or painted or something, so that it doesn't fall out so easily.

I think you're just holding it vertically like this.

It's holding in there for the time being, but I think that could very again easily fall out of there.

One of the thing I'm most proud to mention about this is that this part here at the bottom makes it hard for you to just plug this straight into the arms.

So actually, what you can do with these parts which we removed from the 1st 1 here, You removed for these?

Take this part here and remove this little bit at the bottom. 00:06:55.140 --> 00:07:1.570 You use this piece as an extender to plug into there, and then you plug this onto the arm there and instead of there. 00:07:1.570 --> 00:07:3.760 So you have space for this bit here at the bottom. 00:07:3.820 --> 00:07:5.860 So it'll be like that attached onto the arm. 00:07:5.870 --> 00:07:11.480 Like so, One of the thing that also forgot to mention you have another little adapter piece here, which is for the knee armor.

So if you remove this knee armor here and you wanted to plug some other different the armor onto this, you just plug this on in its place, and then it just gives you your standard three millimeter peg for blood gun where the brother, any armor or whatever else you want to plug on here onto the knee instead.

And so again, here it is displayed with those kind of gimmick parts of the fixed arm and leg to make it look like she's taking off her armor there.

Pretty cool parts, and I like to look at that.

It was really cool when I first saw that.

Remember, first seeing that as, like, Give Me concluded with the original Go Rocket and thought that was really cool looking.

But I always have really have trouble with.

It's kind of really hard to get it to match up, because the part that's like attached onto the back of the leg there, you have to kind of fix that in a way so that the hand is looks like it's gripping onto that.

But you have to have the body is really kind of weird tilted angle. 00:07:54.910 --> 00:08:1.710 It's kind of hard to do, but eventually you can get it there or, you know, close enough to their and it does still look pretty cool. 00:08:1.720 --> 00:08:6.940 And, yeah, I think the way issues on the arm is still holding up pretty well. 00:08:6.940 --> 00:08:10.170 But I'm not having it in any sort of really super dynamic pose.

Yah, I think that'll be something.

We'll try here again at the end.

There's a couple of different options things that I want to try out here to share with you guys.

And the first thing is this.

I know people maybe often want to use these code a bookie weapons with gum pleh because there's some pretty cool ones.

And it's always kind difficult because they're always somewhere in between.

They're usually a little bit big for something 1 44 scale, but a little bit small for something in one of her scale.

So, of course, if you use a one on 1 44 scale model like this like the guard dog, which is a pretty big mobile suit, it kind of will be pretty close.

Or on the other hand, if you use it with something like a master grade F 90 or something that is on the smaller scale in 100 skill that could also work as well.

Now, the problem here with this is that this handle is too big, so it can't hold it.

So you have to kind of gonna to use your imagination a little bit here. 00:08:57.780 --> 00:09:3.900 All you really have to do is just shave this handle down till it's small enough to fit into the hand of Garrett yoga here. 00:09:3.900 --> 00:09:7.170 We also have to pretend like his shield on the shoulder is not getting the way. 00:09:7.170 --> 00:09:13.030 But if you guys can get an idea here at least of the size of that thing, this would be very fitting for something like this.

Something from Sharp's counterattack, this size, larger mobile suit like that for anything smaller, you know, it could still work.

It's definitely going to be very large, though, So if that's the look you're going for, you could work for this at least gives you guys a little bit of an idea of how big this will be compared to a Gump.

Lick it and you'll have to forgive a little bit the wonky pose there.

Sorry about that.

But just wanted at least give you guys an example of this in the weapon in use with a regular frame arms kit as well.

Just for an example.

Because if you're like me and personally, you know, I kind of wanted to get this kid to have the framers girl and weapons separately because I'll probably end of using weapons for not totally decided yet either a different prey, More musket or ah, gum.

Pluck it.

Actually, at the time I had an idea, but I didn't write it down or anything's actually forgot.

I had an idea. 00:09:58.940 --> 00:10:4.710 I know for some Gump lick it that I wanted to use these weapons with these Calo weapons with. 00:10:4.720 --> 00:10:14.800 And now I can't remember what it was, so anyway, But if you're like me and maybe wanted to use these with something else, I wanted to give you guys a couple of different options here.

Really show you these in use.

So here it is with the culture, of course, which we recently reviewed here on the channel writes that pretty much does it.

And again, kind of really the name of the game with these is just all about customization.

So it's all about, you know, letting your creativity go and just, you know, customizing this you could keep it simple.

Is this You know, just what's in the box and that's it.

And I think there's a lot of cool stuff you can do with this.

I mean, the weapons obviously really cool the base get itself very nicely articulated, and there's just a lot you could do with just what you have in the box.

But of course the great thing about code book it is that all of their stuff is so compatible.

We have all sorts of different frame arms kits and other different frame arms, girls and then all their MSG line of all the different weapon options for us. 00:10:58.540 --> 00:11:0.540 Things like that, they're all compatible. 00:11:0.540 --> 00:11:2.480 And then again, you can also use this with a lot of bend. 00:11:2.480 --> 00:11:4.600 I gumpawa option parts. 00:11:4.600 --> 00:11:9.790 A lot of the more recent HD kits are all using a kind of standard three millimeters size peg as well. 00:11:9.790 --> 00:11:15.130 So, like a lot of the different option, says the HC build custom option says things like that.

A lot of those will also work with this as well.

So it's all about trying out different things and just seeing whatever works for you.

Whatever you want to do with that, that one thing that's really nice about the architect, if that is something that you want to do, is that the architect especially has a lot of hard points with it being obviously based on the architects frame, which is like the central frame inside a majority of the frame arms, robots, kits.