One in four people on Earth will be African at that point,

and this is both really exciting and daunting all at once.

It's really exciting because, for the first time in the modern era,

there will be enough Africans on the Earth to bully everybody else.

(Laughter)

I'm only kidding.

But it's daunting, because we're going to have to have economies

that can sustain this population growth,

and many of the people are going to be very young.

Now most of governments in Africa have a plan for this economic growth --

in Kenya, we call ours Vision2030 --

and they're all predicated on industrialization.

The thing is, though, that the world

is going through the Fourth Industrial Revolution right now,

which means that there's a merger

of the physical, cyber, and biological worlds.

It means that because of massive interconnectivity

and the availability of artificial intelligence and robotics,

many of the jobs that we know and are used to right now

won't exist in the future.

So the challenge is a lot greater, in many ways,

than it even was when Asia was industrializing, for example.

To add to this, one of the kinds of person that you need

for industrialization is an engineer,

and they're really in short supply on the continent.

If you compare, for example, the number of engineers

that those same Asian countries had

a couple of decades ago when they were industrializing,

we fall far short.

And I've taught for a while,

and many of the students who are studying engineering

end up actually working in auditing firms and banks,

and many of them spend half their time doing accounting and so on

as they're preparing.

Now, I was fortunate enough to do my undergrad and postgrad education

in the UK and the US, in countries, environments,

where there was all the equipment that you required,

all the sophistication in the systems,

and then I worked for about three years in Japan

doing R&D for a large firm.

And so I was very used to having good equipment,

and went back home

and joined the Faculty of Engineering at the University of Nairobi,

wanting to contribute and be on the continent.

And I quickly found I was really quite useless,

because there wasn't all the equipment that I had become accustomed to available.

And I was teaching students who I would find very bright ideas in their minds

and they'd be presenting things that I knew

if only we had sufficient equipment,

they'd be able to really contribute to the challenge of industrialization.

So I kind of had to change hats, and became quite entrepreneurial

and started looking for money to buy the equipment that we required.

And I heard about a concept out of MIT, called the Fab Labs.

These are digital fabrication labs

that allow, in a rather small space with not very expensive equipment,

people to have access to these tools

to be able to make almost anything,

as the slogan goes.

And so I was able to convince a government official

to buy one of these for the university where I was teaching.

And immediately, we had wonderful results.

We saw all kinds of innovations coming through,

and for the first time in this context at the university,

engineering students from different disciplines

were doing the lab and practical exercises together in the same space.

Normally, they'd be siloed.

And not just that, but students who weren't engineers at all

were also working in the same place,

and non-students, people who had nothing to do with the university,

were also coming into this space.

So you had this rich mix of people,

people who think differently from one another,

and this always is really good for innovation.

I was really proud of what we were seeing.

So you can imagine my surprise

when one day the dean of engineering came and said to me,

"Kamau, the students who spend most of the time in the Fab Lab

are failing their exams."

I said, "What do you mean?"

And I looked into it, and he was right,

and the reason they were failing

is that they'd honed their skills so well in certain things

that they were going out into the city and offering services for money.

So they were making money --

(Laughter)

and they therefore weren't focusing on their studies.

And I thought, what a good problem to have.

(Laughter)

Don't quote me on that. I'm an academician.

So we needed to scale this,

and at the university, things were a bit too bureaucratic,

and so I moved out and I hooked up with people who, in Nairobi,

were providing spaces for IT experts

to share fast internet and things like that.

And some of these places are really quite famous.

They've made Kenya famous for IT.

And together we set up a space which we are setting up right now.

We've moved from where we were.

We are in a much larger space,

and we're sort of making available a wide range of equipment,

including the digital fabrication tools that I mentioned,

and analog tools,

to anybody really, on a membership basis.

It's a bit like a gym, so you come in, you pay,

you get taught how to use the equipment,

and then you're set free to innovate and do whatever it is that you want,

and you don't have to be an engineer, necessarily.

And some of the people in the space are setting up a small company.

They just need a space at a desk,

and so we provide that at a fee,

and others take up bigger spaces and are able to set up their offices.

They're further along.

Maybe their company has been running for a certain period of time.

And so we're able to accommodate all of this

in an innovation space that is really quite active.

What you're seeing in this image over here is Douglas,

and Douglas is an electrical engineer,

one of the people who was really active in the Fab Lab.

I'm pretty sure he passed his exams.

And the image on the top left is a copper sheet.

And he designed a circuit that the client came to him and said,

"I need this circuit for a pay-as-you-go system."

And so this is a model for business

that's made accessibility to goods and services for very poor people

really much easier, because they're able to pay a little bit,

like a dollar a day, for example,

for a specific service.

And so this company wanted to pilot a new idea that they had,

and so they just needed 50 circuits,

so they hired him to make them,

and what you're seeing him doing there is,

he's able to design on the computer what the circuit will be

and then transfer it to an etching process --

that's the image on the top right --

and then populate the board using this robot.

And so what would normally take him maybe a day or something to solder by hand,

he can do in a few minutes using this machine.

So he was able to complete the entire order within Gearbox,

and this is really important,

because if it wasn't for what we provided right now,

he would have had to have hired a company in China to do this,

and because it's such a small order, it would have taken a long time.

It would be a small company,

because big companies wouldn't take small orders,

and even then, if they got a bigger order,

they'd bump him off in favor of that.

And there's language problems and so on,

so being able to do it in country is really very important,

and of course piloting as a phase within the progress of the business idea

is extremely important, because you can go back and make corrections and so on.

In this image -- Thank you.

(Applause)

In this image you see on the top left,

what you're looking at is a 3D render of a digital fabrication machine.

In this instance, it doubles as a plasma cutter

and also a wood router.

And so the plasma cutter makes possible the cutting of plate and sheet metal,

and basically, you make a design on the computer

and send it over to the machine,

and then quickly and precisely, it will cut the shapes you want.

But in this machine,

you can also change the plasma cutter and put on a spindle,

and then you can carve wood as well.

So this was designed by my Head of Engineering.

His name is Wachira,

and when I hired him about two years ago,

I asked him, "Just give me two years,

and by the time you've trained a lot of people

so that we have good staff under you,

then you can move out and become a good story for us."

And that's exactly what's just happened.

He's got two types of customers.

The higher-tier customer

is a company that's actually using his machine

to cut sheet metal for Isuzu truck fabrication in Nairobi,

which is being done by General Motors.

So we're really proud to be able to say

that we have an original equipment manufacturer in Nairobi

that's provided what's effectively an industrial robot

to supply parts for General Motors.

Now this is really important --

(Applause)

and it's really important because the population growth being what it is,

a lot of very large companies are looking very closely

at the market that's developing in Africa.

So in Kenya right now, we have Volkswagen, Peugeot, Renault,

we have Mercedes doing lorries,

and we've also got Toyota, they've been there a long time.

And these are all manufacturers planning to assemble vehicles

and in the future, to manufacture in the country.

Many of them are planning to train lots of people that they'd hire,

and that's really important for the economy,

but when the magic really happens,

when these companies begin to buy their parts for the vehicles

from local companies,

so supply chain development is something that's very important

for us to be able to pivot and to have very productive economies,

and that's something we're focused on at our space.

This other image shows another class of customer that he has.

On the top left,

you have these people who are actually using very crude tools

to work metal and wood.

And Kenya has a population of about 44 million people.

The work force is about 13 million,

and about 80 to 90 percent of those are in the informal sector.

And what you're seeing in the image at the top left over there

is very typical of semi-skilled artisans

who are making products for the marketplace

that are really crude.

Their production rate is very slow.

The quality of the product isn't high.

And so we've teamed Wachira up with a bank,

and the bank is paying him to train people from this sector

on how to use this industrial robot.

And the result is that some of them

are going to be able to get loans to buy the machine for themselves.

Others will be able to go to centers where they can carry their material,

get the design done,

and take the materials back that have been made really, really fast

and assemble them in their own spaces.

So somebody making a gate, for example, out of metal,

may take a week to make just one gate,

but with this machine, they might make 10 in a day.

So the productivity of a large swathe of our population

should be able to jump by a quantum amount, quite significantly,

because of this kind of machine.

And that's what we're at the beginning of, so this is really very exciting.

This is another person who uses our space.

Her name is Esther.