Name: きっきーKのステッカーブックの作り方 (How I made my Kikki K sticker book)
Uploaded: 2021-01-14T09:22:58.000Z
Duration: 7 min 20 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

It's time for another planet related video.

to 不定詞

Today's because going to be super simple, but just something I wanted to put out this so I could refer people to it because I tend to get this question a lot on instagram and emails and messages and stuff like that.

So I thought I'd throw enough so I could just recommend people watch this video in the future.

The question is, how do I make a sticker book?

As you can see, I have a lot of stickers stored in here, but I recently put really adorable plan off.

So anyways, the reason I bought this planner is because, as you can see, this sticker book is getting playful, and I wanted to have another one.

And I'm not gonna be filling up this journal on camera.

That's kind of an overtime thing, but I can flip.

You threw that general later on when I finished.

This video is just about how do I create an incident to go on here.

Basically, I use a sheet of stick of paper.

And as you can see, I've used up almost all the clouds stickers.

So it may not be very clear on this Stick a sheet, but there is still a little bit of space you can see right on the edge.

Probably not more than one or two millimeters of space.

Some stickers sheets are gonna have very little space like this one.

It's like 123 millimeters at most very little.

And then others are gonna have a ton of space like you.

There's, like, at least a centimetre, maybe half a centimeter a space, which is really great.

So these ones are a lot easier to do these ones a little bit hotter, but you could still do them Either way.

It doesn't really matter how much space they have.

You can still make it work, taking you stick a sheet.

I recommend doing is cutting this out in strips, by the way, before we start, if you are using every stick of paper, you should just note that there is like an alto Leia.

And in Elena, I would get rid of this outer layer of fuss because you don't want to include that as part of your measurement, because it's gonna come off anyways.

So I would take that office and then stop the measurement from where the stick of paper actually starts.

Actually, one and 1/2 does seem a little bit short.

I'm really bad with conversion of measurements, but I'm trying to show it to you.

So, yeah, hopefully that's somewhat helpful.

See, I'm gonna make a whole two centimeters, all right?

And I'm going to do the same at the bottom.

Just gonna mock him down him and I like rules that you can see right through.

So that you can see how much papers underneath.

So I personally recommend getting a ruler that you can see right through this ruler that I'm using actually came with my old cape.

That's why I've got And I love using this because it has measurements here.

Measures interest, centimeters, and I'm going to show you later.

It helps me measure out the holes put in.

I've marked it at the bottom, but what you could do next, It's just ruled the line down and then cut it with scissors.

I got this from Office Works, and I recommend if you're really into crafting, I'd recommend getting one of these because it just makes cutting paper so so much easier.

Basically, what I'm gonna do is this is the part where the blade runs through.

Just aligned this dot and the bottom dot to exactly where this is and then just run the cut a throat feel like I might be a little off, but honestly, it doesn't matter too much anyways.

Just run it through and then you have one strips.

You just keep doing that until you have as many strips.

You need two strips for each sticker sheet, so just make sure you always have an even number.

So make sure you're working off a really clean table top like this where I can stick stuff on and it comes off pretty easily.

So in this instance for this stick a sheet.

I don't have very much space at all because even see, there's like hardly any space.

So if you don't have any space on the side stickers, air right up to the edge, then flip it over on the side that you want the binder to be on the rings.

Then just stick this on the back instead.

So what I'm doing is I'm sticking with stick of paper on the back instead.

As you can see, there's a bit of an overlap.

I give it maybe five millimeter overlap, maybe half a centimeter and not too much, but just enough so that it has a good grip on it and just make sure it's even throughout the entire stick of sheep.

This is the part I'm not good at, but their stick that down There we go.

And then if you pull it up so you've lengthen the stick of sheet a little bit with this piece of pot, but it's sticky.

So what you need to do is take another strip of stick of paper, label stick of paper, and then just stick it over that don't try not to overlook the actual stickers, because I've done that.

So you're gonna have a bit of stickiness as overlap Pia of stickiness.

And you're gonna have a little bit over here.

So, for example, just gonna come petal gonna cut this one off and then this extra overlap.

Yeah, I'm just gonna cut that right off as well.

And yet So now you've extended the edge off your stick of paper.

And then this is why I love this Because I can measure up here as to where I think the rings will go because this is an exact match for the rings since it was came with it.

字幕リスト動画再生

きっきーKのステッカーブックの作り方 (How I made my Kikki K sticker book)

stuff

stick

conscious

incredible