So for a kid that does have a lot of detail here, missing a lot of little color APS and everything that helps you differentiate those details is going to be a little bit disappointing.

So it's definitely going to be a kid that you're gonna want to put some paint on it, at least to paint in some of the details that are missing.

Definitely gold, I think, is going to be the color that you're gonna want the most of, especially to spring out a lot of the gold details that are missing on it.

But I think the big draw of these son Goku kids especially, is just the design of them, and it is really an interesting design. 00:00:58.520 --> 00:01:2.160 So if that's what you're in for, then I think you are going to definitely like this kid. 00:01:2.350 --> 00:01:3.410 So we'll get into all of that. 00:01:3.410 --> 00:01:4.460 And, as always, guys a big thing. 00:01:4.460 --> 00:01:6.590 Get us a Gundam store for sponsoring this review. 00:01:6.600 --> 00:01:11.170 You want to check out this kid or any of the kids in the line or everything else they're on their site.

The link to us, a gun store be down below, and you could save 10% off everything they're using.

The coupon codes, aka REALLY is 10.

So check that out.

So all right, now let's get into it, all right.

And as for this kid's main accessory here, it's the angle Camacho, which is this giant claw weapon.

Now the thumb will move on a ball joint around a little bit like that, and then the fingers is basically separate into two have.

So the 1st 2 and the 2nd 2 fingers are joined together, so you got a little bit of movement here for the fingers for that.

Not really a whole lot for that.

And then the whole hand bit is on a bold right.

They're connected to the back half of the hand, which has a clear read part in there, which is pretty nice.

So you can't really see it all that well set inside a black plastic.

Also just point out here in the manual that's supposed to have a lot more red going on all throughout.

Like the whole thing.

Where is the real thing? 00:01:57.920 --> 00:02:0.210 Just has a little bit of that clear red in there like that. 00:02:0.210 --> 00:02:4.240 So you will also notice all these hard points which don't really seem to serve any purpose. 00:02:4.240 --> 00:02:6.000 But those are on there. 00:02:6.010 --> 00:02:12.220 If you were wanting to use those, I guess you do have more than clear is showing through here on the top as well, which is pretty nice looking, but we're not in use.

This is actually mentally plugged on here to the back back.

I just didn't have it on there before, because once this is on here, the kid can't stand up on its own.

You needed action based otherwise thing is just to back heavy with this all going on there on the back.

Unfortunately, this doesn't include in action based.

I really wish that this would have included one of theirs.

This really simple, small little action bases that seems like it really would have been a big help for this kit.

So it's a shame that wasn't included for, you know, a couple 100 extra yen added onto the price tag I think would have made that worth it.

But another accessory you could count for this kid would be the shield Over here.

The destiny is shield in this case is also known as the device.

And once again, if we take a look at the men you can see it's supposed to have some black, red and yellow on.

It's just all molded in one color, so it's definitely gonna take a little bit of painting.

But this also holds the eclipse memory, which is this clear part here in the back. 00:02:57.710 --> 00:03:1.240 You can take that out and and this is used to plug into his forehead. 00:03:1.360 --> 00:03:8.200 If you noticed here there's a little slot in the middle of that red part, and that's where this is going to plug into their like, so fits firmly enough. 00:03:8.210 --> 00:03:9.820 You're actually supposed to swap the eyes as well. 00:03:9.820 --> 00:03:11.050 So let's just talk about that.

Like with most SD kids, you have different I options.

So you've just got the normal SD acute see eyes.

But if we pop off the top of his head here, we can turn that part around.

This part is just in clear red, By the way, we turned that around here to these angry eyes.

They're on the other side.

Pop the top of the head back on there and there you go.

That is going to be his angry form.

And then you can use the claw.

Of course, on the hand and do is super cool attacks and all of that.

But I just want to talk about the stickers to our here.

So aside from the eyes and then behind the memory there, you also have a sticker there Green sticker there for the camera as it were on the in front of the head.

Also got some gold.

Sticker is here on the shoulder is just one on the front and back and then one on the top as well.

So three on each shoulder, and that is pretty much it. 00:03:56.960 --> 00:04:8.290 But once again, if we look here at the manual, consider is supposed to be a lot more gold trim going around on the top of the head here and then on the size of the head, these bits kind of hanging down off the side of that hair of gold trim on them. 00:04:8.540 --> 00:04:15.160 Down here on the front skirt, you have some gold trim around the bottom and the sides of that front skirt parts and the thing they're inside.

I mentioned before, you'll definitely want to get some gold paints to fill in all the different gold trim details around on this that are missing aside from other different color APS.

But just in general, there's a lot of collapse missing from this.

Now, that's a nice details, though.

I like the clear red set inside the head here.

So once you get some paint on the inside of there, so that is actually able to show a little bit better that clear read in these parts of the head is gonna look pretty cool.

The clear read parts here for the wings are also really nicely detailed That's just two parts that will move separately like that.

They're disconnected on the backpack via this bald right there, as you can see clear bits here on the side of the shoulder.

Also pretty cool.

Obviously, this side we have this kind of clear cape effect part, sort of similar to the wing furniture in a cheetah that had that in a clear pink.

This time it's just in this kind of smoke.

Clear, obviously, but it's kind of cool effect. 00:04:59.900 --> 00:05:5.890 The side skirts, as they were, which are actually connected onto this side of the leg, has got some smoke clear there for those parts as well. 00:05:5.890 --> 00:05:10.660 So I mean, all the parts look really cool, and especially the clear parts that are a part of this kid's.

So definitely just some painting along with those would look really nice as far as the gold parts.

Those also look pretty nice as we start in the M boxing there, only a mold of gold, but they also I got some high gloss on them, so they're really shiny and glossy and back here on the back as well that Baxter and the Park here on the back of the head looked really cool in that high gloss, but black and the blue and the grave plastic destroyed of the box.

We're not going to be very glossy.

They're not really super mad, though either.

They're just kind of just normal satin, I guess, as you called it.

The contrast is kind of nice.

I like the contrast of the high gloss in the non high gloss.

But if you want it all super glossy, you're definitely gonna want to get some gloss topcoat for this as well.

Let's go and talk about some of the articulation while we're here.

And I asked for the head.

It won't really be able to go up and down too much at all.

He can see you get a little bit forward and back. 00:05:57.720 --> 00:06:6.410 But just because you got this part here coming off the back of the head of the helmet, I suppose that kind of gets in the way and then the front you got these parts hanging down that also kind of get in the way. 00:06:6.410 --> 00:06:9.160 So head articulation is not gonna be all that much. 00:06:9.160 --> 00:06:12.120 You're also not really gonna be able to rotate it very much either.

just because of the helmet getting away in the way crashing against these backpack parts.

If you took off the backpack, you could at least rotate the head a little bit more, get it back a little bit more.

But as it is, just because of the shape of the helmet on this thing, you're not really gonna be able to do a whole lot with the head there.

Unfortunately, at the shoulders, you've gotta live it.

A front and back movement like that.

You can rotate that up.

You can lift up this clear part there on the side of the arm and then get the arms up to about 90 degrees out to the side.

Like so you don't have any elbow, Ben.

It's just all one kind of part there.

But you just got the arm connected it up bowl joint, there, the tops.

He could move that around.

You can rotate that.

Of course.

Pandas.

Well, just on a ball joints, you could move that around.

We only have this one option for the hands.

Just these holding hands like this. 00:06:54.220 --> 00:07:0.770 If you wanted some of their different expression or a closed fist or something, you could probably use just the option hands just the small size, that option. 00:07:0.770 --> 00:07:3.410 And they look a little bit different in terms of the detail. 00:07:3.540 --> 00:07:5.410 But they should fit in there pretty well. 00:07:5.420 --> 00:07:6.060 At the mid section. 00:07:6.060 --> 00:07:8.020 We have a pretty good Ford and back bend their forward. 00:07:8.020 --> 00:07:10.630 It can't really go too much just because of this front skirt there.

But it can go back really far really far like that where it looks a little bit odd even.

But that section is does move around pretty well in, of course again.

Rotate that here at the hips as well.

This front skirt is actually connected on a V, A bulge in it, which is kind of interesting.

So that just moves around.

You could sort of rotate that, I guess if you wanted.

So that moves pretty well.

However, you might need it to move anyway.

And in the side skirts.

As I mentioned, this bit is actually plugged onto the side of thes sort of top of the leg.

There, please, just on a ball joint there as well.

The back skirt is fixed and that doesn't move at all.

But while we're here, we'll just take a look at the legs before and cover them back up with these big side skirt parts that you do have a bend at the knee a little bit there like that.

And then, of course, you can move the whole leg forward and back and get the leg out to the side pretty well. 00:07:55.610 --> 00:08:0.150 But I've a feeling once the side skirts are back on there, that's gonna be kind of blocking that a little bit. 00:08:0.290 --> 00:08:6.710 So, yeah, once those air actually attached, you're not committed to get the legs out too much wider than something like that, which is not too bad. 00:08:6.710 --> 00:08:10.450 I mean, it's SD like their tiny anyway, so you don't really need a whole lot to work with there.

The front little ankle armour there on that could also move a little bit as just connected via a small little ball joint as well.

So that moves around a little bit.

The foot itself itself also just on a ball joint there as well as you could move that around and point that down pretty far, which is pretty good feet being all clear, Ed, I'm not really into a kind of wish that they would have had that.

Maybe just two parts.

I know you can't ask for a whole lot of NST kid, but two separate parts that would have looked pretty cool.

But of course, once again, you're just gonna need to paint some stuff on this.

So that's really the only big negatives I could point out.

This is just the color accuracy and then a few points of articulation.

But I think if you're the kind of person who builds a lot of SD kids, then that's probably not going to come as a surprise to anyone.

I just want to make sure to point those out for anyone who's maybe doesn't build a lot of SD kids.

And just so you know, you're getting yourself into all these kids definitely look cool, even just straight out of the box. 00:08:58.110 --> 00:09:3.830 They're not really going to look their absolute best unless you're willing to put in a good amount of time on doing all the painting on them. 00:09:3.830 --> 00:09:9.560 And there's a good amount of painting to be done, and so, well, even for me, this particular line isn't really super appealing. 00:09:9.560 --> 00:09:9.820 Just go. 00:09:9.820 --> 00:09:12.630 It's not that kind of thing that really typically into STS and General.

I'm not really so into and especially the Sango could in ones, as I always say, every now and then, it's always nice to try something new, something different.

So I had an enjoyable time just putting this kid together and testing now.

And I'm looking forward to doing some kid bashing with it.

As I talked about in the Unboxing.

That'll be a fun project to work on in the future.

I'm looking forward to that, but I'm interested to know what you guys thoughts on the line.

I'm sure there's probably a lot of very different opinions on this.

A lot of you guys are probably there really super into these kits or just super not into them.

Let me know what you think in the common section down below.

If there's any in the line that you would particularly recommend me to check out later on in the future, leave that down in the comment section below.

Possibly I'll consider that and maybe check outs one or two more, maybe later on.

But in the meantime, hopefully this review is helpful for anyone who was maybe a little bit curious about this line in general. 00:09:58.320 --> 00:10:1.560 Hopefully, they should give you a better idea of what to expect from this type of kid. 00:10:1.570 --> 00:10:2.850 So once again, thank you. 00:10:2.850 --> 00:10:4.220 USA got in store for their support. 00:10:4.230 --> 00:10:5.820 Thank you guys for watching. 00:10:5.820 --> 00:10:7.450 And I'll see you guys next time.