What you just saw was a three month old shrimp in...

the FIT 600. We call this the F4 600. So we have...

3000 shrimp in a 600 gallon,

what we call 'filter-in-tank' system.

So...

Let's go over some of the features of the entire system.

And I'd like for you to refer to other videos on the FITs for kind of how they operate

Since I won't be able to get to the backside of the filter for this video.

What we have is the fish tank here- 600 gallons. This middle area right here

This is the filter

and then on the far side is our sludge basin.

So what we see on this front side of the system is our

Return water, which is clear water coming up through the beads over the screen coming downward here.

This is where we inject our air for our airlift return...

Into the tank. Okay, remember that all the positives that we get from airlifting: that's circulation,

aeration, and degassing.

Okay, so

This water then circulates around and on the far side is where the water is

Leaving the tank...

To be gravity fed to the filter. Alright, so all this is run off of

an air pump: all the circulation and

A second smaller air pump is running the backwash of the filter, which happens automatically, air driven.

So let's look at the shrimp alright, so if you want to come in. Let's see what our shrimp look like right now.

Quite a few shrimp in there.

We're about I would say a month. Maybe a little more away from harvest time...

as the water

Here in New Orleans heats up a little bit.

These shrimp, uh..

white shrimp, are gonna be eating more and more and

Getting bigger and bigger very, very quickly. So we'll have a couple more videos on when they get a little bit bigger.

But this entire system

is

hands-free

All we do is add salt ( to make up for sludge purge losses) and feed

And then watch these shrimp grow.

So it's a lot of fun and very simple to operate.

So stay tuned for more videos on this particular system, the shrimp production system, to come. Thanks so much!