Placeholder Image

字幕表 動画を再生する

  • So we are starting up the full detail on this little Fiat car

  • with some Chemical Guys products.

  • Now this car you can see, was from the dealership.

  • It's a little dirty.

  • But the dealership put some kind of a really cheesy coat of wax on it; we want to take that off.

  • Before we go into the full paint correction and coating application on the vehicle.

  • So we are going to start off with Clean Slate Car Wash Soap.

  • Now Clean Slate is a unique kind of car wash soap that strips off any kind of glaze, sealant, or wax you have on the car.

  • Now this finish is residue-free.

  • So it's not going to leave any stains. It's not going to leave any spots on the car.

  • It's going to rinse away all of the coatings on the vehicle for a clean slate to go along with any full detail.

  • So if you're going to put on a sort of a clear bra, or a vinyl wrap on the vehicle, or if you want to do a vehicle coating,

  • you're going to want to take off anything that is on the paint because you want anything you want to do to stick directly to the paintwork.

  • This also works great if you want to put on a coat of wax or if you're going to be polishing because you don't want any of that residue clogging up your buffing pad

  • giving you an inferior results and taking more time.

  • So to get set up, I have my normal two bucket car wash system.

  • I have a Dirt Trap for each bucket.

  • So i'm just going to take my Dirt Trap and put on in each bucket to get set up.

  • I don't want to install any swirls or scratches as I wash the car and the Dirt Trap is going to help me trap any heavy abrasive debris at the bottom of the buckets.

  • That way I don't grind back onto the paintwork and cause any kind of scratches.

  • I also have a premium microfiber wash mitt.

  • All I need to do to get set up, I have my buckets filled with water.

  • I need to add 1-3 ounces of the Clean Slate Soap into the bucket.

  • So i'll do just over 1 ounce and i'll activate my suds with a garden hose.

  • So i'm making sure to wash the vehicle in straight lines.

  • If I got any extra dirt on my wash mitt as I wiped and I were wiping in circles,

  • you would be able to see those circle scratches easier and they would be harder to take out.

  • So it's important to go in straight lines, whenever touching the vehicle.

  • Now i'm starting on the paintwork, i'm moving onto parts that are less sensitive to scratches, just like glass as the mitt gets dirtier and dirtier.

  • Once my wash mitt is fill of enough dirt and grime, i'm going to go ahead go over to my rinse bucket.

  • Now i'm going to scrub my mitt directly on the wash screen

  • of the Dirt Trap.

  • Every little funnel in there has a little ridge that's going to knock the dirt down directly into the funnel and underneath the wash screen.

  • Now my mitt is clean.

  • Ring it out on the ground.

  • Take car of an extra loose debris and grime.

  • Now return back to my soaps solution bucket to continue washing the car.

  • I have to go from the top of the vehicle, down.

  • Any flat panel, I would consider to be the top of the vehicle.

  • So things like the roof the hood, the trunk of this car had one,

  • these are good places to start because they are less dirty than lower down vertical panels like doors or bumpers.

  • Especially around the wheels, you'll get the heaviest dirt, most abrasive debris like brake dust.

  • Which is very dangerous to paintwork.

  • It'll cause scratches and swirls just about immediately.

  • Now, you can see Clean Slate is removing all the dirt and grime from the car.

  • But what you can't see, right away at least, Clean Slate is pulling off any of the wax coatings.

  • Any of the oily residues that are on the paintwork.

  • That way when we go ahead and go into the Detail Garage to do the claybar service,

  • or to do any polishing, there is going to be less contamination and less debris in our way.

  • So as we go along with the detail process, we'll spend less time taking care of things that just came off in the wash.

  • Now this is a great tool to use to prepare the paintwork.

  • So if I need to move onto the claybar service or if i'm going to polish the paint,

  • there is less stuff in the way that I have to contend with.

  • Now another great use for Clean Slate is after you polish the paintwork, you remove any swirls or scratches,

  • you have any oily residue from any of the polishing compounds or have any compound dust, that you don't want any of that blocking,

  • your vehicle coatings, or your carnauba wax coats, you can easily rinse down the car with some more Clean Slate and knock all that off.

  • So you get a true bond of the vehicle coating directly onto the paintwork for best results and the longest term protection.

  • Now this car is cleaning up very nicely.

  • It had very light levels of contamination over the whole vehicle.

  • And i'm just working top to bottom around the whole car.

  • Again straight lines only.

  • You'll see as I get lower down here this mitt is getting nice and dirty.

  • It's getting very contaminated, but with every dunk in my rinse bucket, i'm knocking the contamination directly through this screen.

  • The mitt comes back clean and ready for action, everytime.

  • Now once you're done washing the vehicle with Clean Slate, you have to make sure you rinse it off so you don't get any of the residue

  • that you've removed from the car,

  • staining and spotting in other areas of the vehicle.

  • So i'm just going to rinse it down, take it inside, and dry it off, and go on with a full detail.

So we are starting up the full detail on this little Fiat car

字幕と単語

ワンタップで英和辞典検索 単語をクリックすると、意味が表示されます

B2 中上級

古い車のワックスを削除する方法 (How To Remove Old Car Wax)

  • 37 4
    rihrong に公開 2021 年 01 月 14 日
動画の中の単語