Name: 基本的なコブラのパラコードブレスレットの作り方 (How to Make a Basic Cobra Paracord Bracelet)
Uploaded: 2021-01-14T06:40:28.000Z
Duration: 14 min 51 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

Hi this is Megan with Beadaholique.com and today I'm going to show you

How to Make a Basic Cobra Paracord Bracelet

version. There's a lot of different ways to do this. I'm just going to show you

a basic disposable lighter. Don't use a micro torch for this. It'll burn

you do want to use your basic disposable cheap lighter

it's really handy. You can use the side of the lighter where it's smooth to  smooth out

get the lighter kinda funky so use the cheap

and then you're gonna need these little plastic

basically the two strand core with the two strands on the outsides. So you're

super basic one is going to fit perfectly

You need something pretty strong to cut through the paracord. I'm using flush cutters

little scissors where a little wimpy. If you have stronger bigger scissors that

to cut about a foot of paracord for each inch

your clasp, this buckle will add about two inches when it's closed

and then you also because it's thicker you wanna add about an inch

so my wrist is about six inches. I wanted my bracelet to be seven inches which

just to get myself a little more of my paracord

one thing that you'll need to know how to do

short cords, center cords. Pull it a little longer

you're going to give yourself a little bit of a tail

the female end of the buckle. Don't pull it all the way out

this end of this cord to this tail on this one so that we have one piece so

now there a couple of different ways to attach

you can just trim both ends heat them with a lighter and try to smoosh them together

male and female fit together kind of a joint

字幕リスト動画再生

基本的なコブラのパラコードブレスレットの作り方 (How to Make a Basic Cobra Paracord Bracelet)

ruin

tricky

scratch

desire