Name: ループが爆発した！やってはいけない！ (The loop EXPLODED! DON'T TRY THIS!)
Uploaded: 2021-01-14T10:49:02.000Z
Duration: 9 min 25 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

程度の副詞

Let's just say this might be one of those times where you don't try this at home.

Probably dot com slash hasty sends guys slip up hoodies.

Putties, Beanies, polos Don't take my word for it is.

So just looking description below when you guys find the link.

So a video I've never done that always kind of wanted to is basically how much pressure can a loop holed?

So this is inspired by something that happened with Nick and I a couple years ago, where I was showing him with a thermal imaging camera.

How radiator works because he didn't know.

So I was kind of explaining it to house a double pass, which means it goes through 1/2 turns, comes back out.

And how on in thermal imaging camera you can actually see that temperature, Grady, and it changes color across the rat, and you can see the split right down the middle.

In order to further prove my point, I was using the heat gun on the radiator to heat it up.

One of the tubes popped off and then we got like, a 10 foot geiser of water that just she went flying up to the ceiling because, you know, when fluids get hot, they expand.

And when they expand past the bursting point of whatever they're being contained into, bad things happen.

And I like opening up the radiator on a car.

But I don't want to destroy perfectly good hardware like that's the test loop that we had built for the 5700 x t liquid double from power color.

I kind of want to see where an acrylic block will blow up.

Don't feel like losing my eyeballs and stuff.

So we are gonna be having at least I'm gonna be wearing this.

I don't have to buy him a new set of spectacles, but hopefully that doesn't come to it.

I also was trying figure out how I wanted to do this.

Now we did something similar sort of similar because we rip this bits power valve right into with the amount of pressure that we were using because you see, thematic stuff is G quarter thread just like this stuff.

Which means I could actually plumb a hose with my compressor right into the loop.

I that says I shouldn't be exceeding 90 though.

Hey, so I'm using now is actually a fantex valve, which is a single body with a cord that rotates to that.

You had, ah, ball valve that closes off and then it's all threaded in that way.

I can, you know, turn up my regulator here.

The point of this video is just we're destroying some of our stuff for the sake of bringing you guys a video, there's no other way to put it.

Look, you're never gonna exceed the capability of however much pressure this radiator can hold or this block and hold or this reservoir got hold of the tubes or the fittings.

I'm using soft tubing because of the fact that they're compression.

Toobin would be less destructive for another truth, not necessarily for your components in terms of fluid, but because the tube would just slide out the old ring and pop it off, sending fluid everywhere.

Ask Kyle and then you would just end up dousing all your components and fluid but not actually blowing up anything that makes sense because it's just a no ring squeezing on the outside of the tube and then it just slides out.

I think I also just gave someone the story of the birds and the bees right there.

I'm also using this metal block because for the same reason I described a moment ago, I don't want to necessarily explode the acrylic.

I think the ring in there would fail first, but just for extra strength.

But I'm really starting to get nervous now, like I feel like in Mythbusters have had that blast shield.

I just realized if I open this valve because this is under pressure to hear, so water can't go that way.

We just don't want this to fill up with fluid.

Oh, it is introducing air and his shield.

Because I'm like, Do I just start giving more pressure?

I think these they're only rated to like to bar e.

I can't I can't believe it hasn't exploded yet.

We're gonna max out the compressor, Dude.

But what happened is I went out of lead forward and the net clicked on it, so my nerves were already shot, so Oh, my God did it was bending the radiator in last way.

字幕リスト動画再生

ループが爆発した！やってはいけない！ (The loop EXPLODED! DON'T TRY THIS!)

stuff

stretch

necessarily

squeeze