Placeholder Image

字幕表 動画を再生する

  • Hey, what's going on?

  • Guys?

  • They were taken.

  • Look at other premium bend I master grade here.

  • This is the Riga Z Unicorn version.

  • So basically.

  • Well, not too long ago we had the Rigas you come out as a P Bandai kids the Regency custom, I should say.

  • And what that date was taken Old master grade, which was pretty widely considered to be one of the world's master grades out there and did a ton of revamping on it, basically turning into like a version 1.5 still had some parts of original kiss.

  • It wasn't a complete version.

  • 2.0, sort of similar to abandon has done with the master grade dumb recently of creating the premium bend.

  • I'd watch and watch sky.

  • These premium Bandai version 1.5.

  • Master grades are usually pretty awesome.

  • So I'm looking forward to this version as well.

  • So this version of the Rigas E what's the unicorn version is gonna be different colors from the original design.

  • I think Just design wise, this one is a little bit more closer to the original Riga Z design compared to the Regency custom which had a little bit Maur different parts on it, of course, but this one still should be pretty awesome.

  • I think it's probably gonna be using about the same amount of parts from the original kit.

  • So it's going to still have a lot of new parts in here, as against the It's in this very large sized box in ST Monochrome color.

  • There being a P van.

  • Dyke it, of course.

  • But just here on the front is looking pretty awesome.

  • You can see it's sporting a much smaller backpack, but I believe we do still have all the parts to make the larger backpack, which is just gonna be like a separate flyer bit thing that you can just have separately.

  • Or you should be able to mounted onto his backpack as well.

  • We'll see in a moment once we get it all opened up.

  • So just take a look around the box here quickly with being a teen band like it.

  • It's not gonna be too much to see around the box here, just the name on that side on the other side, and then on the top and bottom just the same thing.

  • Basically, what's on the front of the box not much really to see here on the outside.

  • Let's just get it opened up and right after that with this being a p van Dyke kids Nice.

  • We've got some water side decals, so those are looking good.

  • Take a closer look here in a moment, but it's in case you couldn't tell from the box.

  • Are because I guess you can tell because the monochrome.

  • But the color scheme for this is basically like gray and dark blue.

  • As with many things, the unicorn version color scheme for this eyes going to be a little more muted, a little bit more sort of utilitarian or like militaristic looking, not quite as bright and colorful as the original design.

  • So you can get a good sense of that here in the gray, actually looking a little bit slightly Maur greenish bluish gray than I was expecting, expecting to be a little more neutral.

  • But if we make our way down here to the manual, just take a look at that.

  • So there's the color scheme that you can see the cover art the box, start there in full color, so it does look really nice.

  • We'll take a look around here to the back of the manual.

  • And just once again, you can see it has the smaller type backpack there.

  • But this is just This is going to be the D Kyle guidance where all details are gonna be going around on the kit there.

  • Then we do have their color guy down here at the bottom.

  • That looks like this is our limbs.

  • 65 were a light blue and then, uh, and then 40% white as well.

  • So it's just a much lighter version of Arlen Light Blue So interesting there for that color.

  • Let's get the manual opened up with this being people like kids, you know, typically, and Master Graves will see some other different photos or stuff interesting to see inside the manual.

  • But with people like, it's not going to be the case.

  • So we just get right into the parts list here, and you can see we've plenty of leftover parts with being in a band.

  • I color's color swap, and also just being a 1.5 kit again essentially have a lot of leftover parts there.

  • And so, yeah, we're gonna have a small mountain of leftover parts with this kid.

  • Looks like here's just a look at everything you're gonna be building.

  • The main one will suit the rifle.

  • The beam saber handles the shield and then the back weapon system will have their as well.

  • So it just all goes through the construction of that.

  • Nothing really too special to point.

  • Now let's let's just go back here to the back.

  • That is about the transformation here as well as we saw with the Regency custom.

  • The transformation for this kid is pretty bogus looking.

  • It's not really cool at all, but you can do it anyway, so there's just showing how to.

  • Then it looks like we have a little stand for this as well, so that's an interesting improvement.

  • So that will be interesting to see how that looks like just two parts of this lot together to make this really simple stand for that.

  • So that's interesting.

  • All right, so that would be cool.

  • Alright.

  • Spreads to have oil stickers here.

  • We only got a few, as you can see, just for the eyes and a couple of camera stickers, and that's it.

  • But the waterside decals she looking very nice.

  • There was some markings, mostly logo markings that we got the loan.

  • No belly FSF markings there some numbers and stuff.

  • So looking very nice to have these, we have a set of four screws here as well pc 1 to 2 for a large sheet of polar caps here in gray.

  • And this MP runner here, which is the set of hand parts there, were usually used with the masquerade age kids and then also later used with the you master grade gym sniper two in those different kids as well.

  • Let's run away.

  • Here is from the original Riga, Zeke, it from 2001 is gonna see we got in three colors who got one clear part there for what looks like the eyes and some great parts there for weapons and a couple of inner frame kind of parts.

  • And then a bunch of yellow parts up there across the top earner, B one and B two are molded together here.

  • This is in a kind of dark blue color there for mostly backpack parts.

  • Looks like you see here in that bluish gray color for, like, the main armor colors, you can see there's some parts on there for the head of some skirt body parts.

  • All that as well.

  • D back to the dark blue color and just inside.

  • No.

  • These are all still parts just from the original kid.

  • No new parts quite yet.

  • E here.

  • A bunch more of the armor parts.

  • They're in light, bluish gray color.

  • We have got to of this e runner f is getting into some parts there for the inner frame is against is just getting a kind of standard medium gray color.

  • We've got two of this effort her as well in the same thing here for energy.

  • But one interesting thing to know about this is, well, runner F and G for this car mold in his regular polystyrene plastic, I would tend to think that probably for the original kid that these were in a B s.

  • I'm not sure it's the one.

  • You can correct me if I'm wrong about that.

  • But at least in this case, they're not a B s artist in regular polystyrene Got runner H one here and I just kind of nice purple color.

  • And the murder H two is those parts for the stand.

  • So I guess these stand parts were included with the original care.

  • Just again.

  • I'm not really familiar with the original kit to know that, but this runner is from 2001.

  • So I guess these were something that were included the original kid.

  • But we're unfortunately maybe not included with the Riga Z Customs.

  • So that's kind of a shame, for I hear just a couple of big parts there for the shield and the backpack J a few more parts in dark blue.

  • It looks like mostly for the feet and a few other little bits on their runner J K.

  • A few Maurin Efraim parts here in gray.

  • We got two of this care owner and again, still just all from the original kids so far.

  • And then runner l is a few more wing parts there for the backpack, it looks like, And for the last of our runners from the original kid here, Runner M is going to be a beam saber effect parts.

  • And now, for finally getting into the brand new parts specifically for this kid.

  • So now we can kind of see and get an idea of what's gonna be new with this case.

  • You can see we're gonna have new parts here for a rifle.

  • This is runner X.

  • A, by the way.

  • Also a new purple part there for the face Nuclear parts for the head as well.

  • So it looks like I'm gonna have an entirely new head under X B is gonna be a bunch of the new frame part, so you can see we have new frame parts for around the waist and the bodies, so that'll be good.

  • Some good new parts there to improve the articulation here on under X B and then order X C as well.

  • Some more new frame parts here for this and against all in polished up Polly styrene Know a B s.

  • It seems like with this kid under X d, some more new parts there for the head around the waist torso section as well.

  • It looks like we have a new seated pilot figure in here as well.

  • Same thing here for an X e, a fume or new armor parts in that light bluish gray color got to this X e runner and lastly runner X f here some new parts in the dark, bluish color.

  • So it's new parts there for the arms around the chest.

  • For the shield there, it looks like as well.

  • And that's it.

  • You can see there's gonna be a good amount of the old kids still going to be used with this.

  • But a lot of the most essential parts are going to be replaced with the new parts.

  • So again, it's gonna be very similar to the Regency custom.

  • But we'll take a look in the review.

  • How much?

  • They're exactly going to be similar or different.

  • Anyway, I'm gonna get this built up and then we'll see how it looks.

  • All right, guys, that here is how it's going to look.

  • And I gotta say putting this one together was not quite as interesting as the Regency custom.

  • Now I've never built the original Master Rigas E.

  • S.

  • O.

  • I don't have that experience, but this one, I could tell there was a lot more of the old kid in there, so that just made it feel slightly less exciting.

  • Where building the Rigas the custom, I could tell where there was a lot more new parts in there, and so it just kind of had that little bit more of an exciting feel toe like, Oh, this is all new, even though it's all new.

  • I mean, even building the old kid would be new to me.

  • You guys get what I mean.

  • This one has more old parts in there, but it does still have a lot of new parts, of course, again, where it counts.

  • And that's the important thing.

  • So either way, it's still going to be a much better kid than the original and various salad kids.

  • Indeed, Actually, Still, we'll take a look at everything in detail here and woman, but just I think, the overall look.

  • It does look good again.

  • If you stood them side by side with this one and the original kid, you would definitely see this one still looks miles better, even though it does still use a good handful of parts from the original kit.

  • Well, I think the color scheme is pretty cool.

  • It's definitely going to look a lot better with you.

  • Will at least put some code on it.

  • I mean, obviously, painting it would be ideal, but if you have not going to paint, I would say at least, you know, prepare some Matt coats, you know, do some panel lining prepares a macro to spray on this, and it's gonna look so much better than how it just looks.

  • Just go with that kind of plastic.

  • You look of some of the parts.

  • It's not really doing the kid any favors.

  • But if you're just wipe that out with some nice flat go, it would definitely look a ton better.

  • And, of course, um, pen aligning and maybe some detail painting as well, even if you're not going to go the distance of fully paint in the kit.

  • All right, so just to run through the accessories here really quick first here is our 1 100 scale pilot figure, which is just kind of a generic pilot figure.

  • Honestly, Not very good looking one.

  • Either.

  • We've got our to beam savers, which are pretty cool.

  • We have this clear yellow effect part, which is not your standard, clearly effective part for a beam.

  • Saber has this little more kind of flared end there where it comes out.

  • So it looks really cool and yet just really interesting, unique handle that it's got for that and we do also have the two inactive being super handles as well, which will fit up into the backpack for a storage if you want.

  • But there's not really particularly any reason to store them up there unless you want to be sort of accurate.

  • I guess we've got a couple of different action based adapters here for attaching the kid onto an action bases there, a mobile suit mode or in its transformed WAVERIDER mode and our hand option parts here you've got them just the same as like with the masquerade Jim sniper to another masquerade recent, Jim Variants Us.

  • These are just the same kind of swappable finger hands.

  • We have closed fist open hands, trigger finger hands and just a regular weapon holding hands.

  • Then we have the beam rifle, and this is actually a new beam rifle.

  • But I wanted to show you this because you have basically the parts of the old bean.

  • Rifling here is well minus the panda P.

  • So use the end piece there, the barrel piece of the old kit and for the main body.

  • You have new parts there for this, and you'll look at them side by side and they're almost the same.

  • It's just that the new one is slightly larger, so it's a little bit longer and the details are a little bit different on it.

  • But the new one definitely looks better, but that's it.

  • It's not really all that different from the old ones.

  • So if you prefer a slightly smaller one, you could just build the old one if you wanted to.

  • You got the shield as well, which is pretty much all old here.

  • So it's just got these bits there inside handle that will fold out and also the connector that will fold out there in that we have a couple of connector pieces that will be used with the shield and also the backpack for when you've got this in its transformed mode.

  • And this little bass part here from the original kit, which you can use to, is as like a simple stand.

  • For if you're displaying this in its transformed vote, you could just rest it on top of this very simple just to part base here.

  • So it's a nice, interesting thing.

  • If you want to display it, it's transformed mode, although I don't think you'll want to.

  • It doesn't look very good, necessarily And then there's the back weapon system itself, which is pretty cool.

  • And you, this is basically when you transform the kid, it basically goes up inside this big hello gap in there.

  • And it's a lot different from what you got with Rico's the custom.

  • But, I mean, it does look pretty cool if you just ignore the fact that just got this big, hollow space on the inside.

  • It still does have a pretty cool looking look to it.

  • I mean, then you've got a bunch of leftover parts, of course, almost the entire head and torso.

  • Pretty much is leftover parts among a bunch of other things.

  • But one thing that I do also want to point out is that you get an extra set of intensity, actually have two sets of these antennas there for the head.

  • As once I was just gonna be left over.

  • But I would definitely hang onto these guys a few.

  • Then later, in the the painting process or something, if you accidentally break one, you've got some spares.

  • So just hang on to those make sure you don't throw these away.

  • And here are the two kids to the inside by side.

  • And I mean, you can see why the Rigas the custom was maybe a little bit more of an exciting kit to build.

  • It's definitely got more of that sort of Gundam flair to it.

  • Where the Riga Z here.

  • The unicorn version is just very much like a sort of typical Grundy sort of looking suit there.

  • So it doesn't quite have that same excitement to it.

  • But you did.

  • You know, if you're a fan of that grand style design like this, then I mean, that should be for you.

  • And I do like both, definitely.

  • But I'm just meaning that thing.

  • These two variants of the same mobile suit definitely appeal to different tastes.

  • All right, guys, I won't go through.

  • All of the articulation of this kid was over all.

  • I mean, it's pretty basic masturbate, articulation and everything you would expect.

  • There's just a few things I will point out.

  • Number one is that the head it can go up to there, which is really quite nice because quite far and on a similar note, we do also have a Tobin here.

  • So if you guys are big fans having nice Tobin, though That's pretty much just for the articulation for the transformation just will point that out to you guys.

  • Also for the hip joint hip joints are unfortunately very much just a ball and socket joints there, so our movement is gonna be pretty limited for those.

  • And then also, once you attach the action based connector up there, it's going to actually limit your articulation of the hips even further, because then they can't go out quite as far because they're being blocked here by the action base if connector, if that's totally plugged onto there, so once that's in place, you're out.

  • We're moving.

  • The legs is pretty limited to about there, and that's about it.

  • And then also, for those interested, of course, the cockpit hatch does also open up, and you have your seat, a pilot figure sitting up inside there as well.

  • And finally, while this kid doesn't really have any seam lines pretty much anywhere on the kid, it does have one set of steam lines you will have to worry about here on the upper arms.

  • That part of armor there around the upper arm will have a sea mine down the front and back of that on both arms.

  • But other than that, that's pretty much it.

  • And then here is how this is going to look transformed.

  • And I gotta say, it does sort of slightly look a little bit better.

  • Then the Rigas The custom transforms because of the back weapon system.

  • How it sort of all this sort of fits around the shoulders and torso.

  • So sort of does a good job of hiding the gun of a little bit better than with the Regency custom.

  • You had this all which was just like on the back of the gun them and the gun was just kind of hold it up.

  • At least in this case, it's sort of like goes around the Gundam a little bit or the immobile.

  • So I should say, Sorry, Thio sort of hold it within this back weapon system.

  • So it's a little bit hidden in there anyway, but so it doesn't look quite as bad.

  • Still, not really something that I would be too into.

  • But you have, ah, action based connector that you can plug this onto up underneath the crotch there to blow off some connection based like normal, but of course that we have this stand here, so I want to You just try that out here.

  • But also just want to make sure point this out to go.

  • These little yellow events here on the side of fallout very easily.

  • If I just am not careful with it, that will just slide out of there.

  • So just make sure you at a little glue.

  • Oh, there's something on there to make sure that that doesn't fall out on you and you get lost or something.

  • It's them, but they're as you can see right now, that little yellow event on the side is sticking out because it's about to fall out of there.

  • So just be careful with that as we actually balancing on there, I gotta say a little bit, kind of worried about that because it's resting on top of the shield.

  • Then, like that connection base thing that you got there doesn't.

  • Actually, there's no thing that actually plugs onto the shield in any way, like a little tab or something that plugs onto it just literally just rests on top of that thing.

  • And so it's a little bit of a balancing because the shield is very curved.

  • So if you imagine, just like setting a ball down how it is gonna roll around and that's basically what you've got there with the shield.

  • So you've got to make sure you've got a very flat surface and make sure you've got a balanced really well.

  • Otherwise, if you wanted to display it in its transform state like this, probably the best bet is Thio.

  • Just use this on a action based.

  • So at the end of the day, guys, this is gonna be one of those people and I kids where I gotta say it's one that if you're a fan of the design, then I would definitely recommend getting the kids.

  • It's a very decent kit if you like the design.

  • That said, if you're not really all that into the design, you're just kind of like maybe you you're a fan of like, this type of kid.

  • Generally, beer, not strip.

  • If this is really one you want to pick up or not, then I would say probably pass on it, become across one you know, for a good deal, a good price you can't really pass up on.

  • Then you know that could be a different case.

  • But generally, if it's not a design, the really super into, I would say just past and maybe consider getting the Regency custom.

  • If maybe that's something that's a little bit more your speed.

  • I think in pretty much every way the Regency custom is just a better kid.

  • We're all objectively, but this one is not.

  • I mean, this'll sort of like in between the original and the Regency custom.

  • The Regency custom had a lot more new parts and of much more exciting build this one.

  • Well, it's not as many new parts and maybe not as exciting of a building list again.

  • You're a big fan of grunt suits, but overall, I would not say this is a bad ticket by any means.

  • It's just a good, fine master, great kid that doesn't really do anything to stand out in any way.

  • But, you know, if you like it, then it's gonna be a cool addition to your collection, for sure.

  • So that's my thoughts on the kid.

  • Let me know what you guys think.

  • They're down in the con section below.

  • If you have any further questions, of course, you can leave those there as well.

  • And thank you guys all.

  • So much for watching Thank you again.

  • As always to you.

  • It's a Gundam store for their support as well.

  • Guys do show some love to use a gun store.

  • If you can check the link down there in the video description and use my coupon code, there's not really is 10.

  • Find anything that you like?

  • They're so I'll see you guys next time I have a good one.

Hey, what's going on?

字幕と単語

ワンタップで英和辞典検索 単語をクリックすると、意味が表示されます

A2 初級

Pバンダイ MG Re-GZ [ユニコーン版] UNBOXINGとレビュー (P-Bandai MG Re-GZ [Unicorn Version] UNBOXING and Review)

  • 1 0
    林宜悉 に公開 2021 年 01 月 14 日
動画の中の単語