Name: このPCケースで格安PCケースへの信頼を取り戻しました! (This PC case restored my faith in cheap PC cases!)
Uploaded: 2021-01-14T10:35:39.000Z
Duration: 16 min 20 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

I'm gonna bring you the review that no one asked for.

転換語

But I can't help but do because I'm super impressed with this.

I don't do case reviews unless they really surprise me.

This is Lilian Lee land Cool to kind of a dumb name.

But I'm gonna tell you right now we did this build at Micro Center in our last video.

We talked about doing a review of this case because Phil and I are both truly impressed at what you get with this case at its price point, which makes me think other case manufacturers should definitely be listening to Lian Lee.

And 60 is proud to announce they're all new crack in Ze Siri's Aereo featuring a 2.3 inch, 24 bit customizable LCD screen allowing the users to completely customized the look of their cooler.

Capable of displaying useful system info and temperatures.

The LCD screen can also play gifts and custom images, giving users the freedom to truly customize their experience to learn more about the NZX t crack and z Siri's head to the link in the description below.

I said cheap and the title and cheap is completely subjective, but at the time we built this of Micro Center, this case was 89 bucks.

I explained why in that video, what we chose this case, it comes with three case fans that, well, I would say they don't suck, but they do if you have them as a pool fan and they blow really hard.

Now start with the obvious stuff, and I know it's a black case, so I'm doing the best I can tow like this so you guys can see it.

Um, the ventilation is plentiful, if you will, so enough so that Steve might hate it less than other things.

So it's one of those things where it's not just round holes or just grill a grilled cut or a mesh or hex, which is overdone.

In my opinion, this has what Phil calls come like an imperial grading.

Look, it's got these sort of like alternating long oblong slits, but we've got vents right here between the shroud and the main chamber.

With 2 120 millimeter fan mounts, there is room to mount a fan right there and still a radiator on top.

If I was to reroute that so I could actually have a 2 40 mounted rad to 40 or a 2 80 because it fits to, um, one forties or one twenties, we could fit a 360 in the front or 4 20 in the front.

I'll show you that in a sec, but we've obviously got a rear fan here.

Let's talk about the front because when it comes to ventilation, this is where a lot of companies have started adopting this more kind of a solid front panel.

But there is a lot of air flow that comes through this.

Now I'll demonstrate that once we fire the system up, but we take this panel off, you can see.

Although it has RGB lighting built into the frontier, it does it through thes pogo contacts there, spring loaded.

It's why they're called Pogo, cause they push against this, and that's where it gets its power.

Not only that, this also has on the backside a pigtail ready to go toe, ADM or lighting strips to it if you want to.

That's one thing to keep in mind, though it's not 12 it is addressed me.

So it's a three pin, and you can plug this into a motherboard with addressable RGB into control over your case.

Or if you don't like the instance of the motherboard we used here.

It's got its own lighting control up here on top that you can use to adjust colors and such.

But if you look at the ventilation, this is the way we have it configured.

There's plenty of air flow that actually comes to this because, as you can see, because it's got this sort of Ah Kong cave shape has a bigger volume of air in there, that if this were flat right in front of the fans now it also has filters that are normally in there that we took out.

And they are silver on this side, which is a side that would face out.

And the idea behind that is it gives the lighting something to sort of bounce off of.

So you can kind of see the silver few there now a little bit, which matches the silver.

Now, by doing this, moves us on to the next thing to talk about with ventilation and that being this front piece right here.

So this front piece, I can't take it out because the fans already wired.

End this front pieces of bracket that you can fit your fans onto you or your radiator.

But if you look, this is flush, which means that your wouldn't have that much room between the fans and this to keep from choking off air.

Because the closer the fan gets to the material, the less gap it has to pull air through.

But there are two screws up here on the top that give you three positions that you can mount this by moving it back now by moving it back means you can fit either.

Ah, 360 Slim rad right here and then you can put on the inside.

You come out your fans by removing this cover gives you up to like 80 millimeters in thickness that you can see right here.

But by moving this whole bracket inward because it does reposition inward, you could fit your fans on this side of it and a 3 30 millimeter radiator and push pull fans so 30 25 mil fans in front of it.

Or pull fans what they 60 mil rat and then not interfere with anything up top.

Because you got this room we have right here because we only have 2 40 or off Grady appear, which is not gonna interfere with putting a deep rad or fans.

So in terms of water cooling for this being a standard a TX chassis, it's extremely modular and extremely well thought out.

These are things that you don't typically see in a case that's under $100.

This is the kind of things you see in cases that are closer to $200 or at least 100 and $50 enough.

But for 89 bucks, it really makes me wonder how the hick Lien Lee is doing it now because this is considered a full 80 ex chassis, its overall size in footprint is probably more so of like I've had to compare its size wise.

I'd say it's very similar to like an H 5 10 from NZX T considered more of a mid tower, not a full tower in which usually means you're not gonna be able to fit things like e a T.

Well, you can, actually, because what we found and I think I should be able to do this with the system assembled.

Like, if you do a walk around the case with it not assembled, you can talk about all the features.

But some of the features don't make sense once you go to building them, you like.

Okay, this technically says you could do this, but, you know, it doesn't do it very well.

It, sir, there are two screws up here on this plate, but if you take this out and you flip it and I'm trying to do this now with, uh, I have some things that side too.

Okay, So before I can take that out again because it's built in, let me show you the back panel.

This is all these covers everywhere so that you can hide all of your ugly wiring.

Some people might say that that's ah, that's cheating.

Cheat every single day of my system's gonna look this clean.

So this is it, Ty going through there right now so you can see it's got zip tie, wire management or another type of Velcro.

Apparently, I used verge terminology and don't call things with cold tweezers.

If I could pull that out, undo all my cable management and you can see that the part that covers the cables is closer to the motherboard.

But you can flip it 1 80 and it moves it outward, which means you can fit in the 80 export at that point.

Now, look how much more clearance we have to fit in E A.

X motherboard, something that doesn't usually happen with the case at this form factor at this price point, Which is why I told Phil, we have to show the audience this case.

This is a case we're talking, drives our sleds that lock in there so they are easy to get your drives in and out.

They click in there, you get three of them.

Those obviously fit either 2.5 inch or 3.5 inch gives us 123 4567 7 2.5 that you can fit in here for 5 3.5 And if you want to use double sided sticky tape, you could fit a whole bunch of SS D's right here.

And because it's got these giant openings right here which don't have grown mints, that's the one thing I wish they'd done.

That's like really the only critique I have about this case.

Rubber grommets would be nice if you could just put it easily.

123 right there so you could fit 10 2.5 inch drives in terms of graphics, part because this thing does not stick up any higher than where the motherboard socket is.

Like the slot for the PC, you could fit a graphics card that's long enough that would like, Well, I'm not many millimeters that is probably says in the manual.

I don't have it in front of me now moving along to the back here in terms of expandability, though you do get well.

1234567 slots, which is pretty standard for a T X um, of expansion.

There would be town cards, and also our stuff obviously depend on your motherboard.

But if we look in the back here in another cover right here, and there's another feature under there that I found while we were building that I wasn't even expecting.