Name: 私は彼のケースをAIOに適合するように改造することを申し出ました...物事は少し手に負えなくなりました (I offered to Mod his case to fit an AIO... things got a little out of hand!)
Uploaded: 2021-01-14T10:35:09.000Z
Duration: 25 min 36 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

現在進行形

all right, So we're starting yet another building that I'm in the process of my personal bill.

動名詞

Mike probably sounds really bad far away, but we're just doing a bit of luck.

And we're going to be doing some case mod into this because why the heck not?

He is a huge destiny to fans were kind of going with sort of a destiny to theme here while also upgrading some of his parts without him really knowing Because that's what you like to do around here.

So what do you say we go ahead and start tearing it down?

Corsair is proud to present their new hydro X line of custom water cooling products.

The new XT revive Siri's radiators offer the perfect balance of Finn density and airflow to keep your loop cool and quiet.

The extra seven water blocks feature full coverage, cooling Fergie Pew while also maintaining an aesthetically pleasing design, while the XY seven and XY nine CP blocks keep all your modern CP is nice and cool to see the complete lineup of high directs cooling products from Corsair click the link in the description below.

So one of the major issues with the note to a two is the fact that there's not really room for a a Iot or anything like that.

You can see he's got the small crowd red cooler keeping a 67 100 k Kulish, to put it mildly.

So we're gonna be doing an external radiator on this way.

Asked him like, Hey, are you cool with J?

I I'm not doing that full custom, Luke or anything on this is really not any room for it.

To be honest, I don't want to mount all kinds of things.

We still want some portability for him because he does like to take it to friends, houses and do little lands and stuff.

When I'm kind of thinking Is that well, haven't the externally mounted Ram Ram bread that's a really big stick around?

The idea here is that this is sort of a weathered spacecraft, if you will, we have to do right now.

Those were gonna tear this down because I think as far as we're gonna get today, and I sure hope that he backed everything up because you never know what happens when you start taking this part.

Today is some of the painting, but this is this is more about case modeling.

That there's, like, no chips anywhere except for their This could have been so didn't memory.

So, as you can see, um, yeah, this stuff is definitely worthy of an upgrade.

We're gonna keep in these parts, though, because they could be a perfect used for something else.

But they have a fill in on a mission to get all of his friends with computers to start playing playing during the PC master race.

Well, then thing this is how it goes like that.

So we literally you're gonna have the hottest part, Which is the GPU fans here pushing air in just right into the GPO.

So this is gonna be forcing the GP fans face that way.

so this will be forcing air right onto the D P fans.

And then the backside of the GPU is exposed to this cover.

So we're gonna do now is gonna be opening here with the radiator pulling heat out.

But, Jay, it's gonna pull hot air from the GPU.

It's gonna pull some pretty fresh air, to be honest from here.

From there to there, it's not gonna be too bad.

It's obviously better than anything this chassis had before because it had no ventilation, no active ventilation in terms of like fans moving air inside of it.

The only fans in here with a GP fans and see if you fancy which takes heat, pushes it away from the park.

But then conviction does the rest, which is not assisted.

It's gonna be better no matter what, they're gonna have fans here, fans here, it's just gonna do the top, huh?

Yeah, like proofed in my face that lines up.

It looks like it looks like a face with the eyes.

Now those two marks are good don't overdo it.

There's gonna be a lot of detail showing and painting which we're now preparing for now, which is the part I am most excited for.

So what I'm gonna do right now is I'm gonna use trusty painting rack I made by fractal logo.

I don't have any idea that's gonna work most because it's the only great color we could find that doesn't have a metallic in.

We imagine this is the color the parts would be, Um this is what we're gonna be doing, some chipping effects and some weathering effects down to this color.

And this is what will show if you seem kind of like a starter Jump ship in destiny to that sort of the effect we're going for.

Although that one with the green color, it's not my bill, But it really didn't wanna do Green.

I didn't want to commit him to a color that made clash in his space.

I have no idea what is set up is like so That's why we're going with this.

So now I'm gonna do is a nice, maybe too thin coats of this color.

And I did one coat even though you were intentionally speeding through it.

Because to see more 3 16 stainless steel, the inventor of Paris they invented spring seems like who I should've gone with to begin with.

Anyone that has done any sort of model making knows what I'm about to do with this frizz.

You can actually spray paint using hairspray.

What this will do now is it will create a barrier between this paint and the next pain I'm gonna put on so that after it dries the next layer, I then take just regular water, which I have in a spray bottle.

Spray water on it, let it kind of soak, and then take a toothbrush, a sponger, toothpick, whatever.

And you could start chipping off the pain because it can't get here.

What'll happen is you need to seal it when you're done with some sort of a clear coat.

Which I do have a Mac clear thinking around here.

Obviously corners, corners make the most sense, right.

Basically, what I'm doing is I'm loosening it up in areas that I wanted to chip.

Looks like exactly like the surface of no fun.

字幕リスト動画再生

私は彼のケースをAIOに適合するように改造することを申し出ました...物事は少し手に負えなくなりました (I offered to Mod his case to fit an AIO... things got a little out of hand!)

literally

stuff

sort

force