Placeholder Image

字幕表 動画を再生する

  • He's right.

  • That's I know.

  • I said, I want my recent videos that this PC was not much of a priority of mine, but I wanted to be.

  • I wanted to be done already because you know what always happens whenever I started personal building my own new processors lunch.

  • But we're not upgrading.

  • This one is no point.

  • Recent.

  • Finish it, you guys.

  • I got new merge.

  • It's available now.

  • Probably dot com slash hasty sends guys slip up hoodies.

  • We got tri blend.

  • We got a new logo.

  • I digress.

  • Since 2012 it's a rest.

  • A little.

  • He has been asking for that anyway.

  • Way hell kinds of stuff.

  • Zipper, Putties, Beanies, polos Don't take my word for it is obviously I can't do this ad.

  • So just looking description below when you guys find the link.

  • Thanks.

  • You know, the reality here is we're like, 90% done with this.

  • The only thing I really need to do is put the the SS D's in which we're somewhere and then finish the loop and wire it up.

  • Now, in terms of custom wiring, I have still have to order those from cable mod.

  • They are my cable there, My cable sponsor and I use them for all my bills.

  • But I can't do that without measuring.

  • I have to know.

  • And this is a very different type of system when it comes to the way the cables were out.

  • Typically with any case, you just go the standard links, you're probably fine.

  • But when you go with something like this, standard links aren't gonna work.

  • Because if we look at the back side here, the power supply which I scratched the cover for is gonna go right here.

  • And the cables are just gonna have to go through there and then, like around and up over here.

  • So what I've got to do today, if everything goes according to plan, I might actually have water going through this loop because I have to flush it.

  • I cannot just put water in here and then just call it a day because of the fact that when we have plated tubes like we have here, these go until, like, an acid bath and stuff and they for the plating process so you could see the inside has a bunch of, like, residual from that coding process.

  • So we're gonna have to flush the system out for a while and get it really clean.

  • Otherwise we're just gonna be dealing with issues.

  • But then I also need Thio hook up this power supply so I could start getting my links.

  • So as I started to say, if everything goes according to plan today, we should have a running loop and then at least my measurements here so that when we come back for our final piece, it will just be Well, I guess be Roland Benchmarks.

  • I'm excited at the barracks cards.

  • Oh, these.

  • These are 20 t i for the wind threes with secret sauce bios on them which will allow them to over clock very, very far.

  • And my system at home is in dire need of a retirement.

  • Skunk Works is ready to come back to the studio and go on display or something.

  • But I'm just ready for a change of scenery.

  • And then this is what's gonna be allowing me to then start my home office remodel, which now includes new carpet because of a husky puppy.

  • We'll just leave it at that.

  • It's a very sore subject.

  • Let's just let's just go.

  • Who Jay has the superpower where he can catch things, but only if he's not aware of them before he catches well, it's not just catching things.

  • It's like like somehow in middle of my head there I was able to calculate the bounce angle and where it was gonna be and then, like, caught it down there.

  • But seeing it happen, like and then thinking to myself, Well, I've got to catch this Never happen is never gonna happen.

  • The power cable for the 16 hundreds.

  • I'm telling you, this is a 1600 T, too.

  • So it's a titanium rated power supply wires, That's what looking for the screws.

  • So I was concerned that this power supply is gonna be so long.

  • That would have crazy Ben's coming out the end.

  • But that's clearly not the case.

  • So if I could, I can't melt it down in there right now.

  • I'm just doing a bit of test because this has to be mounted in there, would do it, but that's how the power supply is going to be.

  • You can see we've definitely got some slack there.

  • It would've been nice.

  • Field amounted to this on the Mount that in there, but obviously you can't get to the screws.

  • Metric didn't fit, but the imperial quarter inch dead Bom bom bom The power supplies in the way that this works.

  • Same thing with, like, your io and stuff like your US visa stuff.

  • They come through here and come back through here because there's fans.

  • They're so this.

  • I want to be like, Oh, is that there?

  • You see?

  • So that's what that holds for their keep so nice to meet.

  • And then there it is, coming up the back.

  • I'll give in win a lot of credit on a lot of things, but this is dumb.

  • I don't like this because to plug him in, you've got to open it.

  • But when you open it, you just It's like you can't move the cables on.

  • I wish I could just put this through right there.

  • The clip won't let me.

  • So it comes out in a 90 go straight up, comes over here and that kind of goes like a radius bend.

  • I was like a radius right here in this cable.

  • I think the measurement from the end of the plug to right there, it would be proper, So that is 18 inches.

  • What is 18 inches in millimetres?

  • The answer is 457.2 millimeters.

  • That 18 inches too long.

  • We do 17.

  • So I used the key Lamont configuration er to do all these cables.

  • So I get all my links and stuff and then I go in there and when I use the cable, my configuration, I can put the links that I want.

  • It's all in millimeters.

  • That's why I have to convert it.

  • You go out the rest of the world.

  • No, you have to convert because you're very well.

  • Yeah, I know that We're not alone, though.

  • There's three countries in the world that use imperial so and then the English still use miles.

  • If you're if you're triggered by that, he really should rethink your priorities.

  • So what makes you men?

  • All right, So 24 point, it's 435 millimeters.

  • So what I want to do with the cables is I want them to both kind of come up and then sort of, like, thread together like that and then go back together through this hole straight into the power supply.

  • So they're all gonna be eight pin.

  • So these are all these air 16.5, which I guess makes sense because the 24 pain is farther back.

  • It's having to make that Clint up and over its 404 20.

  • So here's the thing.

  • We're guarding a CPU.

  • The Intel 10 98 e x e is the same core count as the 19 9 89 80 XY, which isn't here.

  • Now I feel like I want to put the 10 9 80 in here to be like to be the newest thing.

  • But I also feel like I want the 10 9 80 to be available for other testing and stuff versus Threat Ripper and and all that.

  • So I don't really want to tie it up in my personal rig.

  • There's no core count benefit to it.

  • I don't want to go with a higher density core count, which already said before, because I'm only gonna hurt game performance more if I scale up Marty, I already be at 18 course, So yeah, I think I'm just gonna stick the 1988 XY in here.

  • It's not one of those things where it's like Oh, no.

  • This is a club computer.

  • Anyone that thinks the 99 80 XY is a plug computer.

  • My God, I want whatever you do for a living.

  • Okay, so now I need to see if I can't get this loop up and running.

  • This residence is like 95% perfect, but they force you to mount it this way toward the cables facing you.

  • So then the cable has to make some crazy, like wrap around, and it doesn't have a channel or anything to do it immediately.

  • I don't want to put it there.

  • It's too close to the fan going down.

  • It's too far.

  • In my opinion, I feel like this is a bit of an oversight on similarities part like power wire for this.

  • You didn't really think about that very well.

  • There's this gorgeous thing, but we're gonna make the power wired to be, like, in your face.

  • I wish all wires were Bluetooth because wiring really screws up here.

  • All right, so I'll move on to the wiring stuff later.

  • I was a sort of 80.

  • Being wiring was not my intent right now, so it kind of sucks that these are not on the same plane, but like I said, because of that in and out on the CPU matter, in and out on the jeep, you don't.

  • I only had this in on the GP because the out was the taller of the two tubes there in parallel, and I thought it would be easier to make air move.

  • But that's not as important.

  • So I mean, it'll air will move.

  • So what I could technically do is I could switch this so that out is there and then use my spacers.

  • Get these up, and then that would be the end.

  • So I'd be like that into there is we go over and then go out there to keep you for to the radio.

  • I just wish I had a chop saw.

  • I'm constantly coming up with new ways to try and make the job a little easier.

  • Scratches on there.

  • But that's okay.

  • It's the backside.

  • So now that that is on, our CPU in our DP Loop are now connected.

  • It's at an angle, but whatever I care so that connects the reservoir.

  • That's right there.

  • I need to trim this one down.

  • Ther scratch that all over there, Theo, doing that again?

  • What's worked on any computer build long enough will agree with me that eventually you just get sick of them.

  • By the time you're done, you're like care anymore.

  • The difference between now and like, why the bills take so long.

  • Because back when I worked out of my home, I just go work on evenings like we're going a couple hours here and there.

  • But when you leave the office, you don't go back to it.

  • Toe work still, but thank you.

  • Don't go back to it like a drive only back over here to work on it.

  • You know, the only build with enough it was Destiny would literally wouldn't have gotten done if we did.

  • We hadn't done that.

  • Probably not.

  • Yeah, that bill, like literally when you're watching, like Overhaulin or whatever.

  • And they're like putting the last bolt in as the guys like waiting on the outside.

  • The curtain was kind like that.

  • Keep have to file these edges.

  • Smooth sand himself.

  • Otherwise, not only will it not fit into the fitting very smoothly or usually it'll shave and sliced the crap out of the fitting.

  • On his way in.

  • That's why this taking so much longer than any pizza t bill.

  • There's so much more work to be done.

  • The actual tube, she can hold their She could probably hold water.

  • I hate this build and done piece of cake.

  • You e eh, It's too short.

  • I'm all for any method to do this faster.

  • This clearly won't work on 90 good under the torque setting.

  • Well, I'll be damned now.

  • It's already checked up.

  • Theo Dang.

  • I wish that these were on the same plane like that.

  • We could just do a single 90 into It would be so clean unless, yeah, that might work.

  • And if that works, do you know what sucks about that?

  • It means I would be one fitting short.

  • So in my amazing organizational abilities, I put my, ah, fickle fitting in my course air box.

  • All right, so I changed this fromthe long extension from this guy to the half extension based on like that.

  • That's what's half that extension, because I didn't feel like I was having enough room to make my 90 degree radius here.

  • I'm using the offset 90 like this so that I can line it up with the whole.

  • So what I'm gonna do now is I'm going to use this piece of P T.

  • G.

  • Where's my cutter?

  • What's up here To make my template and then I will use my template to mark my metal tube.

  • That way I can then get it.

  • It's all line up because I'm all out of new nineties.

  • I've used them all.

  • All I've got now are my leftovers from different pieces I've cut.

  • Okay, Time to do the blow test.

  • Okay.

  • I think it's time to try and fill this thing.

  • All right.

  • It is filled.

  • Now it's bleeding.

  • There's gonna be some air in the radiators for a bit.

  • There's gonna be some air in the blocks of microbial stuck the things.

  • That's why when you're doing your league tested stuff, letting it run will definitely help Believe that your pricey or razor reservoir level go down a little bit over time.

  • This is where you also you start doing all your tilting to help promote.

  • Yeah, we have more rebels to move a lot of bubbles to move.

  • This is ah P W M pump.

  • So what I'd like to do right now is I'd liketo slow it down and have it not run so fast.

  • When it's running so fast, it sucks a lot of bubbles back in before they could get up to here and let the air settle at the top.

  • Another reason why I really do like reservoir to Brazil.

  • Where is better than destroy block stuff like this.

  • This has a lot more work involved to get it all truly blood.

  • But it looks super clean when it's all done.

  • So we're gonna do now is we're going to go ahead and wrap up this video cause this loop is finally complete.

  • Glad I found that fitting at the last second because I didn't wanna wait longer for that.

  • So the next video you guys see on this will be its completion with it fully running all the lighting being set up to the nebula theme.

  • Whatever we do for the bridge right there to try and get the bridge themed with the whole nebula thing.

  • And then we're going Thio let this leak test because I've got so many fittings and things in here.

  • This is one that I truly believe needs a leak test to feel 100% confident that we're not gonna be dripping water anywhere.

  • So on the back side, everything looks good.

  • Not seeing any fitting or any drips, but what we're gonna do, what we just let that go is sort of put paper towels kind of threw out.

  • You want to use clean paper towels?

  • Not dirty ones cause of their dirty.

  • How you gonna know if they're fresh drops or old drops?

  • So finally, I made some sort of progress on this thing.

  • Still not taking anywhere in here as long as the post Malone build that can guarantee you the owner of this one will definitely appreciate it more.

  • All right, guys, as always.

  • Thanks for watching this super long billed lug from my personal rig Nebula.

  • We will see you guys in the next one with the cool the Jigen.

He's right.

字幕と単語

動画の操作 ここで「動画」の調整と「字幕」の表示を設定することができます

B1 中級

今までで一番きれいなループだ... (This is the cleanest loop I've ever done...)

  • 0 0
    林宜悉 に公開 2021 年 01 月 14 日
動画の中の単語