Placeholder Image

字幕表 動画を再生する

  • This is the lock picking lawyer, and what I have for you today is a huge padlock from the Israeli company Rob Aria.

  • It's a fairly common law design in Israel.

  • Available any number of different sizes ranging from eight millimeter shackles all the way up to this 16 millimeter behemoth, and this one weighs in just shy of £3.

  • I have featured similar locks in the past, including this multi lock see 16 and this Yale smart padlock 16.

  • Now the great thing about this design is that it has brass on the inside for superior weather resistance and hardened steel armor on the outside to resist brute force.

  • But this one is different.

  • It has steel on both the inside and the outside.

  • To be honest, I'm not sure why they use the two part construction other than to look like a popular locked model.

  • So let's see what it takes to get into this.

  • It has a seven pin dimple core, so it should provide some challenge.

  • Unlike many similar locks, this does not have a dust guard on the bottom.

  • We're going to put some tension in here with this Z bar and I'm going to be using one of my multi pick dimple picks.

  • Okay, little click out of one.

  • Nothing on two.

  • Click on three Little click on four.

  • Look out of five click out of six.

  • Nothing on seven.

  • Back to the beginning.

  • Nothing on one, too.

  • Think I gotta click out of three?

  • Might have gotten something on four.

  • Nothing on 56 Little click on seven Feels like we might have taper pins in here on two.

  • Click out of three Click out of four.

  • Nothing on 56 Very Go Click out of seven and you got this open so it did not feel like there were any security pins.

  • Although we may have had some papers on the ends of them.

  • Let's take this apart and see if we can figure out what's inside.

  • Now that the shackle is out, the inside can be removed by taking this small set.

  • Screw out of position.

  • Yeah, and right away I can see this is a vastly different design from things like the multi lock, which would have a large opening here showing the mechanism and then the dust cover, which would come off.

  • Let's drop this out.

  • We can see most of the ball bearing locking mechanism there.

  • See?

  • Okay.

  • And what do we have to do to get this core apart?

  • Okay, this is unusual.

  • This core feels like it's made out of aluminum, and it is permanently assembled with a pin that goes in the top here.

  • So without drilling that pin out, we are not going to be able to take this apart.

  • So that's a little bit on the disappointing side.

  • I was hoping to see what was inside and confirmed that there were no security pins in there.

  • Either way, I think they could have done a better job on that core.

  • In any case, that's all I have for you today.

  • If you do have any questions or comments about this, please put them below.

  • If you like this video and would like to see more like it, please subscribe.

  • And, as always, have a nice day.

This is the lock picking lawyer, and what I have for you today is a huge padlock from the Israeli company Rob Aria.

字幕と単語

ワンタップで英和辞典検索 単語をクリックすると、意味が表示されます

B1 中級

879] HUGEイスラエルの "Rav Bariach "南京錠が選ばれた ([879] HUGE Israeli “Rav Bariach” Padlock Picked)

  • 3 0
    林宜悉 に公開 2021 年 01 月 14 日
動画の中の単語