Name: オールAMDベースのカスタムPC!あなたの助けが必要です! (The custom all AMD based PC! We need your help!)
Uploaded: 2021-01-14T10:23:21.000Z
Duration: 11 min 35 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

So I said it in a review that I was going to do an AMG themed build around the radio on seven.

程度の副詞

Very similar to how I did with the Titans are T X and the last, like themed AMG build I've done was actually threaten upper.

We put a lot of time and effort into that.

I don't know if I'm going to go quite as extravagant with this one, but I want you guys to be a part of this.

I kind of want some of the inspiration behind what you guys would do because I'm not the most creative person.

Believe it or not, most of the things that you see happen around here happened by accident or just because I'm stupid and didn't really think about it.

Sponsor is cable mod and their new website builds dot g will be taking this and kind of putting it up on there.

Dougie, if you're not aware, is a new website where you can upload pictures of your build, you can list out all the parts you can go and check out other people's builds and see what their inspiration and stuff is.

I mean, it's not the first Web site of its kind, but it's the 1st 1 for cable mod.

And the interesting part is they have regular competitions where he just by having systems up there and being registered user, you can qualify for various cash prizes, parts sponsored giveaways, all sorts of stuff.

There's a link down the description below.

You guys can go and sign up and also fall along with this bill because I'm gonna be taking the progress of this and putting up there because each build also has its own comments section.

You can actually going to make comments on the build.

So rather than commenting on this video with build ideas, because, as I said, I'm gonna be reaching out and asking you guys what you would like to see this kind of turn into overtime.

This is gonna be a multipart er put the comments on the profile for this build, not this video.

So it all stays in one neat, orderly place.

So, yeah, what kind of also putting skunk works up there?

We actually put the black or the gold and white build up there as well.

That was kind of like me testing out, and it's pretty cool.

It's also important to get as many people signed up on there is possible, because the database will grow as more people enter parts and if their parts and on the database, you could add it and they'll verify and all sorts of stuff.

I just liked the look of raw unrefined, an unpolished, and that's kind of what you sort of have here.

Although it's sort of a bead blast on this cooler, it's not brushed.

But yes, um, can furred polished edges here, Um, champers, however they're called.

But cases that's hard because everyone's just use a steel in a powder coat So we've actually had this case sitting here in the studio for months.

So this is the perfect opportunity, because this is an aluminum case.

Okay, so this is gonna be a little bit of a mini review on the SL 600.

I have this thing like, I don't like reviewing cases.

We are going to be reviewing some cases around here like a new mess if I were going to take a look at it like it is, but I like to do builds with cases because that's how you truly get a sense of what's what.

That's how you truly figure out where the shortcomings are.

I mean, we could look at it theoretically and be like, Yeah, this and yeah, that.

You may not find where the shortcomings are, So tell me this wasn't the right case for this.

Now you might be looking at this going, but J solid panels and solid cases.

Not when you got to 200 millimeter fans pulling in there from the bottom.

So the design in terms of the the cooling on this, it's very similar to how heat rises, right?

She got to 200 millimeter fans on the bottom pulling air or pushing air up, which is the natural rise of heat to go out the top.

Which is why the top of this is nothing but one big event.

You could take these 200 millimeter fans out if you want, and then you can replace them obviously with fans on the bottom and put the radiator on this side.

So not that I want to use this guy because I think it's gonna be too big.

But and the motherboard still fits if you really is this guy.

So I think I'm gonna be using the X 4 70 crosshair hero motherboard.

And I think to truly showcase like where the value has always been, is the rise in is what really forced Intel's hand at bringing more course to mainstream.

Going with rise in mainstream on the X 4 70 would just kind of be like paying respects to that achievement that he and he got so no OMG sponsor on this.

The only my own little soft spot for MD member.

I started this channel with an MD built, so we're gonna be using this in effect.

Now, if you want to know the full specs and stuff of this, you're gonna have to go to the build dot G website so you can see all of that rather than me listening down here.

So let's just sort of start to get a little bit of a preliminary look at how it's gonna be.

So see if this looks like it's going to stick this in there Hello, And that's before I've even really done anything so that could even mount like along the bottom.

Like I said, I could go with a thinner radiator still to give me more room here and with the power supply, because the power supply mounts right here.

They're pumping out here putting out there, So I could go with another pump mounted.

I'm excited about the idea of doing a horizontal pump and reservoir like this.

I've seen people do builds, and I think they look really good when they're done.

I've just never personally done one of those, so I think it's gonna look really good.

I'm probably gonna end up going also with a slim 360 for the top and the bottom.

I would have, like, five mounted anything on the inside, but I don't want to cover up with the V A M and stuff.

We still need some airflow over those so we don't want unnecessary, like, insulate them, you know?

I mean, so yeah, I can take because I was gonna use thes rgb Vardar fans because they move such a good amount of air and they're still fairly quiet.

So the fans will go up top radiator will go underneath, which is good, because we like I said, we can't really pass the fittings through on this anyway, because if I tilt this and show you, there's no way to get the tubes through there so the fans have to go on the topside, which kind of sucks, because then the RGB aspect of the fans won't really be seen directly, but they will kind of have some glow on the top because we're thinking red is the accent color we need, but this black silver and red.

So I've had this velocity water block this aim the one because for whatever reason, they sell them independently.

So I think I'll use this one I've not seen like a bare metal one.

Not to mention what we wouldn't find an aluminum one anyway.

字幕リスト動画再生

オールAMDベースのカスタムPC!あなたの助けが必要です! (The custom all AMD based PC! We need your help!)

stuff

sort

accent

debate