Name: GitとGithubの使い方 - iDev Journey #8 (How to Use Git & Github - iDev Journey #8)
Uploaded: 2021-01-14T10:22:19.000Z
Duration: 20 min 21 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

My name is Forrest Night and Welcome to Ida Journey Episode eight.

動名詞

Now, if you don't know what the series is about, it's basically me going from zero toe app, and right now we're in the learning phase.

現在進行形

We're taking a course on you to me, and what we're about to do is discuss a little bit about the section I just went there, which is about Get and get Hub.

Get up is an open source community where people share ideas at it, other people's codes, but they're cut out there for other people to edit and collaborate in just an open source community.

It's very good community, and I'd recommend anyone who's getting into software development to check it out.

But before we go any further, I'd liketo just point this out.

It's It's actual release just happened recently, and with that, normally what I refer to like the lecture about to get into his lecture.

It's a coating warm up in loops and that that's good.

Release caused Deb slopes toe end Maur videos to this course.

They actually added at least two to ah, lecture or two, Section two.

Right now, this is section three and two videos to section two.

So that kind of messed up my lecture account.

Luckily, and normally read out the electric title.

So if you're watching any month passed videos or maybe even miss because in the future they may add more videos, you know, previous to this one right here or Thio what we're talking about right here, it might mess up my lecture account.

So focus on the title of the lecture, not the number.

So right now we're gonna do lecture 33 coating warmup loops.

So we're gonna go to the computer and do that.

So here we have Section three, lecture, 33 swift coding warmup alternating a raise.

So our Simon is to write a function that combines to raise by alternating Lee taking elements.

For example, given the to raise ABC and Bo Romi the function to return a bough b ro see me?

So in other words, we want our first array followed by a second array with 001 one to two because the race started zero and then we want that to translate into our third array which I mean, that's basically what this is.

I knew I had to declare to a raise with the given information inside of them.

And after that, I needed to create a function.

I need this function combined because, you know, makes sense.

We had to combine these and followed by that with ah, with the first and the second string keeping thehe race and texts.

So it all works out and we're basically putting that into one array.

So we're combining both of those by a pending the zero from the first array than the zero from the second rate than the one from the first rate than the one from the second rains.

I realized I had a spelling error in the word combined in my function, as well as a space in between the lesser than sign and the second the words second in my four in loop.

I didn't realize that until I read the error message and then I also had toe make sure a right one back under where I declared a ray three had the first Colin in front of it.

The thing with this is, if we were to have the array one have a, B, C, D and E break in, it wouldn't translate the last two letters in two or a three.

So for anyone who's up for the challenge, go ahead and try to get this working with two mismatching a race.

So one array with five strings and then one array with three.

So now that we got that out of the way, we're not really gonna be coating this section.

We're really just gonna be talking about setting up getting get.

Like I stated before, Lecture 34 is next about version control.

So the courses I was 10 and swift three by death slips.

He says Always use virtually troll versus control.

Is is basically say you have, like, a word document.

We're gonna dumb it down a little bit for anyone to understand.

You have a word document and you know you have version one.

You know how you can edit it and thats save over it instead of doing that.

What you do is you edit it, edit it and you save as and you make it version two.

You edit that one making version three star able to refer back to your previous versions instead of just, you know, over overriding one version, never being able to access that exact thing again because you may take out and development.

You may take out a line of code and replaced with something else.

But maybe you needed that other line of code.

Now you can't refer back to it if you didn't, you know, make a new version and that's where get comes in.

So basically, just like a small examples, let's say have get up here in the cloud.

So what you do is you can commit to get you can pull the code from commit, edit the code, and you can push it back when you pull that code.

So the file name merges with whatever file you already have.

If it's not in sync than you know, let you know But if you already have the basis of this code and someone else had edited it, then what will happen when you pull?

So you will have the updated version and this will make more sense.

This video goes on so toe lecture 35 it is.

We started off using get in the terminal window.

And when Mark used his command line or commands, he didn't explain some of them.

You know, he kind of went over and as you went through the video, you could understand.

But basically, l s allows you to see what is in your current directory.

So if you say just type and l s enter and you're in, you know, debt directory, Dex desktop.

You see whatever files are on your desktop or folders or whatever it may be, C D stands for change directory and you put CD and then you have to put a directory name after that, that is within the director.

I'd have journeys in that when you could.

I did journey and then I'll take you to that directory, and then you can click, or you can type in l s enter again and then you will see whatever is an idea Journey folder or director director is just folder, um, in k d.

It makes sense and that you type that in you type in whatever you want to name the director's.

I don't think he did, but I'll let you all know our m d I ars removed directory and your director has to be empty in order to do this.

So if you go and make one and right after you want to remove it, maybe you did a typo.

You didn't feel like going back and changing it.

And remove that director yet you have to put the directory name right after that.

Also, when you're typing in, let's say side of journey, you can type in I d E E and then hit tab, most likely as long as you don't have anything else named something similar, Uh, a little auto complete.

Whatever you're typing in and touch allows you to create a file you put touching in the filing and you want to create Instead of making a director, you're making a five.

So basically, this is just a bunch of get command.

So there's I'll put a put a list of it on the screen, you know?

So there's get in it, which is which initialize is.

You get status where when you're typing, get status.

字幕リスト動画再生

GitとGithubの使い方 - iDev Journey #8 (How to Use Git & Github - iDev Journey #8)

stuff

figure

aspect

basically