It's Richard McMunn here from the career guidance company.

How to become dot com And I have created a fantastic new mechanical comprehension test video for you.

I'm gonna give you some questions to try yourself straight off the bat.

Give them ago.

There's a timer for each question.

See how you get on some of them Relatively easy summer.

Some of them are a lot tougher.

And then at the end, I'm gonna give you the answers on explanation.

So the rules of the mechanical comprehension test are as follows.

You have just 12 seconds to answer each question that follows.

So you've gotta work really quickly itself under a bit of pressure.

That's the only way you will improve.

There are 10 questions in total, so it's not gonna take you that long to work through it.

I'm answers and explanations, as I mentioned, will be provided, so I'll give you the answer on the exploration so that you learn as you go.

If you disagree with any of them, please put your your comments and thoughts in the questions below the video.

Please work through the test from beginning to end, so give it a go like they won't take that long on.

Good luck.

Okay, let's get straight into it.

If you want to put your answer to the questions below the video in the comments section, please feel free to do so.

But, like I said, I'll give you the answers at the end.

Okay, let's get into it.

You have got a timer on each page, which will take down once it's finished.

I'll move on to the next question.

You got 12 seconds each one.

Here we go.

Question one.

Which load is the lightest A or B?

Both the same.

Okay, it's a question one.

Which load is the lightest load?

A load bay or both?

The same question.

Number two.

At which point would it be easier to haul up?

Load X A.

Both the same.

Be point a C point B.

You got 12 seconds that's going down.

OK, moving on now to question number three in the following Kagen Belt system, which Cog will rotate the least number of times in 50 minutes is a cog a B cog B or C both the same.

So which cock will rotate the least number of times in 50 minutes a B or both The same.

Okay.

Next one question on before it will be Moves anti clockwise at a speed of 100 revolutions per minute.

How Well, well, well.

D move.

And at what?

Speed?

A clockwise.

Faster.

Be clock.

Why slower?

See anti clockwise.

Faster or d anti clockwise.

Slower.

So a, B, C or D?

Okay, we are approaching Hawk way through the test now.

Hope you still with me.

Question number five if coke, eh turns anti clockwise as indicated.

So you can see they're cog A is shown is going anti clockwise.

Which way will cause C term is the a clockwise be anti clockwise or see backwards and forwards if you go.

So that's question five Hard way through.

Test complete hope.

You still with me?

Question.

I'm a six on the weighing scales, which is the heaviest load.

Load a load B or C both the same.

Moving on to question number seven.

How much force is required to lift that 75 kilogram weight?

Is it a 15 kilograms?

Be 37.5 kilograms.

See 75 kilograms or D.

150 kilograms.

So how much force is required to live that 75 kilogram weight.

Okay, you're doing great.

Question number eight Slightly harder now.

Question eight Cog, eh?

The one on the left has 12 teeth and Coby has 18 t.

If Koby complete two full turns, how many rotations will cause a complete is a three rotations B to rotation.

See 1.5 rotations.

Will d one rotation only?

There's a time ago in death.

Okay, Moving on to question nine.

Which direction should the wind blow in order for the plane to take off with the shortest runway?

Is he a well bay?

So which direction should the wind blow in order for the plane to take off with shortest runway question number 10 How much weight in kilograms will will you need to be added in order to balance the beam?

So how much weight in kilograms will need to be added in order to balance the beam?

Is it a 10 kilograms B 20 kilograms?

See 40 kilograms or d 80 key the grams.

The weight will go here on the right.

Don't forget to look at The distance is two meters and four meters.

The clock's ticking down off you go.

Okay.

If you stuck with me and you've got to question 10 Well done.

I'm gonna call into the answers now, guys, I'd really appreciate it if you gave the video of thumbs up.

If you'd like this test so far, I'm not gonna give you the answers and explanations.

Don't forget to also subscribe to the channel.

If you found that difficult, please do.

Let me know where you found it.

Easy Put it in the comments section below.

Let's get straight into the answers.

Question one.

Which load is the lightest?

Okay.

And it is load a low days, the lightest.

Now, just because it is larger in size, then load be doesn't mean it is heavier.

Now the clue is in the way.

The loads are distributed across the fulcrum point here across the sea.

Sore be is pushing down, which means that load.

Be sorry.

Load a za lighter.

So be is heavy.

And then a solo days the lightest.

Okay, so I hope you got that one right to let me know in the comments section.

If you did question number two.

At which point would it be easier to haul up load X so low necks is here.

Is it easier Appoint A or point B?

Well, it's actually easier.

The country see Point B.

Now the explanation is the mechanical advantage of Point B is two.

Therefore, it will be easier to haul the load up a point B that at point A, which would be less than two mechanical advantage.

Okay, question Number three on.

By the way, If you're struggling with mechanical advantages, hang on until the end of the video, because I'll tell you where you can get free mechanical comprehension Test guide That will explain all about mechanical advantage.

Question number three in the following Kagen Belt system, which kagle rotate the least number of times in 50 minutes.

Is it a car?

Okay, be called Bill.

See both the same.

Well, the answer is Kaga A.

On the expiration is the largest cog will always rotate the least number of times in any given time.

Frame doesn't matter whether it's 10 minutes, 50 minutes or 50 hours and also, conversely, the smallest cog will rotate the most times wars.

Remember that question on before it will be the large one on the left moves anti clockwise which is that way at a speed of 100 revolutions per minute.

How will well d the smallest one on the right hand side?

But even at what speed will, the correct answer is anti clockwise, far stup.

So if one cog rotates anti clockwise, which B is, that means that all of them were rotate anti clockwise.

Now because Cog D is smaller in size, it will therefore rotate faster.

So the answer is C anti clockwise faster Question number five If cog a turns anti clockwise so obviously anti clockwise is against the way O'clock would normally go.

So clockwise is the way the hands on a clock would go to the right on anti clockwise is round to the left.

So if Cog a turns anti clockwise which way Wilcox eater, well, the answer is anti clockwise because Kaga is turning anti clockwise, which means the central large cog rotates clockwise.

Therefore, see rotates anti clockwise.

Question six on the wane scales, which is the heaviest load.

So how many of you put a will?

The correct answer is they are both the same.

See now the Wayne skills are level, therefore the weights must be equal, regardless of the size, and always look out for that mechanical comprehension tests.

Okay, this is not like trick questions, because most people go well.

Um, the one that's heaviest is a because it's the largest, and it's not necessarily the case.

Question number seven.

This is a difficult one.

How much force is required to lift that load to lift the weight?

Okay, the answer is 37.5 kilograms.

If you've got one, correct police put it in the comments section belongs.

You've done really well.

Most people will get that wrong now.

The explanation is this type of pulley system as a mechanical ever advantage of two.

Therefore, to lift the 75 kilogram weight it requires 75 kilograms divided by two equals 37.5 kilograms.

Like I mentioned earlier before gonna tell you in a minute where you can get a free mechanical concepts guide that will teach you all about how to pass mechanical advantage test questions.

Now, this is a tough one again.

Question eight Cog A has 12 t even called be larger.

One has 18.

If Colby completes two full turns, how many rotations will cause a complete.

The correct answer is three rotations, so each full turn of could be will result will result in 18 teeth divided by 12 teeth equals 1.5 rotations.

So two turns of Kobe will result in kagay completing three rotations.

Question number nine.

Which direction should the wind blow in order for the blame plane to take off with the shortest runway?

Well, the answer is a.

Now, in order for the plane to take off with the shortest runway, the aircraft requires a headwind, so it needs to be going into the head into the head.

When you notice that a lot of egg at airports, wherever they are, the pilots will always try and take off into the headwind.

That's why you have one of those, like wind socks, the usually orange Nutella pilots, which where they're blowing on.

They always try and take off into a headwind because that creates lift.

Okay, number 10 a difficult one.

How much weight in kilograms will be needed, so he will need to be added in order to balance the beam so some people would have put B 20 kilograms.

But there is a trick here if you look there, These two meters difference there before and how many of you put the answers?

40 kilograms, If you did be really honest, put it in the comments section below.

But the correct answer is actually a which is 10 kilograms.

Now.

The distance of the weights from the fulcrum in balance point is double.

So it's two meters there, and its form it is they're there for the weight required to balance should be hard.

So the correct answer is 10 kilograms.

I hope you got that right.

We did welled up.

Okay.

Do you want that Free God that I mentioned about how to pass mechanical comprehension tests?

Click the link below this video to get your free guide.

Okay, It's a pdf downloads.

He can have it literally within one minute's time and start practicing.

It looks like that Loads of mechanical comprehension, test introduction, packing their load to sample questions as well.

Just click the link directly below the video.

Like I said, I'd love it if you gave me a thumbs up.

Would really appreciate that guys spend a lot of time creating these videos.

Not really appreciate it.

Don't forget to subscribe to channel on Say hi in the comments section below What you thought about the test questions and how you particular got on how many you got out of 10 and then hope you have a wonderful day and thank you very much for watching.