Name: マザーボードを変えたのですが、OCの効果はあったのでしょうか？ (We changed the motherboard... did it help our OC??)
Uploaded: 2021-01-14T10:06:23.000Z
Duration: 15 min 30 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

We've talked about this a couple times already, but I'm gonna see Yes, even I'm sure you guys were getting kind of sick of it, but I've decided I'm going to be using this PC full time.

I'm kind of redoing my whole home office and there's gonna be a place for this PC somewhere.

And I'm thinking this would make a great guest PC as well.

Friends come over one play computer games with me, and I used to have two computers.

The old office and I had two computers in there.

Well, since then it turned into a slash guest room and I had to give up that space.

But now that we're moving into a new home and it's got a dedicated, much larger room, toe work is my game room.

I think it's time that we, uh we do a little extra work to this guy.

His video sponsored by Master Up in the Sun Heizer HD six ex ex professional grade reference headphones.

With more than 50,000 units sold, the HD six X X is by far the most popular headphones ever sold through Master the superior build quality, comfort and lightweight features make.

The HD six XX is among the best headphones available for only $200.

I'm curious to see how high it audio sounds for only 200 bucks.

So one of the things we talked about in our over clocking video was the fact that we couldn't get the see if you two really sustain a five gigahertz over clock.

Even though we've seen the 9900 k do a ton of over clocking with no problem, we've we've been able to push all of the cores to, you know, five gigs plus 5.2 even on a iose And this one, for some reason you saw with O C C T.

It kept dropping down to like 454443 But Senate bench was fine and games for finds.

We were like Something is holding this back.

Well, a lot of you guys in the comments were like, It's your motherboard, that m iss I motherboard is v R m throttling.

At least that's what a lot of people were saying.

That not just like one guy and they got a bunch of likes.

So I said that one of my issues with this was it felt like they sort of cheap out on the motherboard.

So I'm gonna be putting in a new motherboard today, and I'm still planning doing some arts that's, like, possibly taken the skins off and get him stripped and polish.

It's like a super shiny think of like The Phantom Menace.

Yes, I know nobody like the Phantom Menace, but big, shiny spaceship that belonged to Queen Ahmedabad.

Allah So that one would kind of be on a dollar a dollar.

So I probably still do all that, But that stuff that we could do after the fact So I've got right here, my roo Strict Z 3 70 No, it's still 93 90 because the one z 3 90 m i t.

Export that we have is still being used in the small build we did for the C.

And with all the work I went through all the headaches I went through on that I haven't had the heart to tear it down yet.

Probably get torn down at some point because it's kind of a loud mess, although Phil Phil use it wasn't loud when you were dating stuff, But whatever, this still has better over clocking features than we think this motherboard does.

One drawback to this board, though, that this board has which is kind of funny is this has an external mounted clear Seamus button where this one still uses an old style jumper on the surface of the motherboard itself.

So if I really Bork the over clocking the night that, open it up and I have to jump for that, which means I find abusing this board full time and I don't upgrade again later, I'll probably end up wiring like a button to the top or something.

You could use just a standard regular button.

We're gonna go and open it up and let's see how hard this is gonna be.

I don't think it will be that hard, but famous last words.

Now I've already verified that all the sides and the plugs lineup because you talked about that in our last video now highly recommend you watch our tear down video if you haven't already because we kind of talked about where things are located on this.

Also to one of my friends told me that this graphics card which I said we'd like a reference design, but it doesn't look like a reference card.

They also said that this is an M S I motherboard.

So clearly, Corsair has worked out a deal with M s.

I on this, which is probably why they obviously you're using that, uh, particular motherboard.

So if we look at this, everything's in the same spot us be three point was on the bottom, right?

We got Saito right above it and stayed on the inside, which they have some state of running right there.

Yes, we got a pin on the top, left top left, and then us b, same exact spot here and here.

So we're really hoping at this point that we're going to get better over clocks with this board, But looking at the V.

Most of the motherboards we have around here for homicide don't have any sort of video poured on them in the 1999 100 K does have an eye GPU that's very useful for things like troubleshooting or even fast, fast because envious video because of quick sink.

If we do any sort of video rendering on this machine, we can utilize the IGP to be a dedicated judges.

So for whatever reason, Emma side removes that entirely.

I think they just assume if you're running this CPU, you're gonna have a graphics card, and we d'oh.

But we can leverage the eye GPU rather than this being something sitting there, not being used at all.

So there is another benefit to updating this motherboard, even if performance wise on the over clocks, we don't gain anything if I remove the cooler than I could remove this whole piece.

And I don't want this same flopping around so it gets damaged.

Another thing we're gonna also benefit from.

There's an m 0.2 on here, and you see how this one has it mounted on the back.

So does this motherboard Problem is, this motherboard doesn't have a mounted on the front.

And my concern is, since there's a solid wall there and a GP on the other side, the drive is gonna heat soak.

And as m dot to gets hotter, as with any storage, it slows down.

So we're gonna move it to here, which is gonna be underneath this heat sink, which makes contact with it.

Which means that it's gonna be now in the direct air flow from that conviction assisted cooling, Which means we should get some better sustained drive speeds.

I don't think it's gonna really make any sort of a difference, but my use case on this, but it helps me sleep at night, has some pretty good thermal priced applications right there.

The's just the physical aspects of the space.

There's a little snap tabs, if you wanna feel, can see that.

So these air snapped in like that and it wouldn't clear these.

So you could just, you know, push these up in out of the way and then So, uh, like I was saying, we have all these skins and stuff, right?

That we can take off your shiny white mother board.

Manufacturers insist on not having the standoff of them back to pre installed.

I mean, I think the biggest piece of advice I would have for anyone attempting like small bills like this is just take your time.

And if it doesn't fit, push a little harder.

They're glowing rgb in there, like way up in there.

You can really see them, but they're there.

Jake, can you switch the motherboard and have your everything work?

Well, usually since the introduction of you, if I bios, you could.

字幕リスト動画再生

マザーボードを変えたのですが、OCの効果はあったのでしょうか？ (We changed the motherboard... did it help our OC??)

stuff

sort

dedicated

conflict