Welcome back, everyone.

Ah, let me the media.

Ah.

Mmm.

You just throw up a post here perhaps.

Ah.

Ah.

Just want to say two.

Let's see Samurai Adler asking you, Please show me the goof all around.

So, uh, yes, I'll have the revue up for you soon where you'll be able to get a good look around the goof.

But just I guess in case you wanted to I'm gonna look around that.

There's fronts and this side back off the roof Custom.

Uh huh.

I still don't have that looking quite right.

Let's do that.

And this, Like that.

Oof!

Ah!

Let's see.

Say if the if the high new and new Gundam for the look Ah, course.

The main complaint of the MG New is the funnel series.

There was tape that won't have Heck.

Ah!

Okay.

Ah, yeah.

If you worry about the steam lines on the goof custom, let me stay here.

See?

Mine's seem pretty good.

You got a seam line on the back of the leg here.

The steam is just made up as a panel line there.

So you're all good there.

But on the lower leg.

You do have a little bit of a seam just at the back of the bell bottom there.

So the seam line there.

But that should be really easy to get rid of.

And the way the lower leg goes together, it doesn't lock in any of the joints or anything that you need.

Thio modify that in any way.

So it was putting those parts together, getting hurt.

A little steam line there on the back of the leg.

It's easy enough.

The thighs, the seam line.

There is also a panel line, and I'm wondering if I have that put together correctly because that part this thigh part is like, Oh, I guess if I didn't push that dealer, it's right.

But it seems like it's not quite right in there.

It's a no seam line there, the four arms and upper arms, no seam lines there at all.

You have a C might on the shoulder parts, eyes kind of to be expected, but it doesn't run through the main spike.

The main spike's a separate peace.

So that's good on.

That's kind of it.

You ever seen my No, no, no, not on the torso, either.

So yeah, pretty much Just a little bit there on the back of the leg and a little bit on the shoulder.

And that's it.

So pretty easy peasy, I'd say, Uh, no.

The destiny on the compared to the elder or Dr Skin is a little bit more complex of a building, so we'll take a little bit longer on the El Door.

Dotrice was just fine because, like I said, I think this afternoon working on the news video shouldn't take all that long, So I think we'll be okay for taking a little extra for that longer time than I had planned for live streaming today.

I think is okay.

DT warrior has gone, man.

You're late.

Yes, you missed the good custom.

But you're here for destiny.

Condom.

So that's okay.

All right.

So, yeah, I skipped this kid when it first came out, but, uh, for two reasons, number one, the first reason why wasn't really too interested in building interviewing this kid when it first came out was because I'm not really that big of a fan of the destiny Gundam in general.

So I'm not really super into the design.

The other reason.

Ah, the other reason is that I just don't really feel like I really needed to, because you like the point of reviews is to helping help to inform you guys about the kid.

But I'm sure this is a great kit.

I'm sure you guys don't need me to tell you that it's a great kit because if it's anything like like the HD revive like the updated HD versions we got of the freedom and the Strike freedom and the impulse Gundam, which are also fantastic h tickets.

I'm sure it's just like that.

And so I'm sure it looks.

I'm sure it's gonna be a good kid, and I don't expect to have any major issues with it.

So I didn't really think that you guys really needed my input on on this gift, and I wasn't really too interested in being it, so I I skipped it at the time.

But the reason now have you guys I haven't heard you mention this before.

And sorry if you have Ah, I hear it again.

But the reason why I decided now to finally pick it up is because I wanted to do a kid bash project with this and the single coup destiny Esti Sango could an SD kit And I think that'll be a pretty cool project.

So I'm looking forward to working on that, actually.

So that'll be something that I hopefully built to work on sometime next couple months.

It's kind of a lot of stuff going on, but Ah, the destiny with the effect parts.

Yes.

Sorry I missed that.

Who?

Who said that?

Kayla?

Yes, Yes, We've got the effect parts.

Yes, for this, uh, here also in a moment.

And this should be like this.

Uh, I want to see your single cookie.

Yes, I will.

I and busy at the moment to check your link.

But summer, if you want a message me that either on Instagram if you just send it as a message to me on Mr Graham, I'll check it out a little later.

Yes, Uh not this thing.

Go, Castro.

I mean, the, uh the single could and SD Destiny kit was the destiny.

I forget the name of it.

It's around here somewhere.

Um, or over here.

Where'd I put that?

Actually, um yeah, that the you know, the SD single could and destiny kit that I reviewed a couple months ago.

That one you guys saw in my review.

I talked about my idea in that review that would be cool to Kit Bash that with this.

Do like an S d h d get bash with this kid and that kid.

So it's, uh, still got, like, all like the style, the flare of the single could and style for that but with the little bit different proportions and articulation provided from this kid.

So that's the plan.

It's just going to be a matter of getting around to that.

So, Varun, thank you for all the hearts.

I appreciate that.

Um Let's, uh uh All right, So what do you say now?

Sure, I have the heinie custom.

Yeah, I wanted to get the heinie custom version of this.

And if you're gonna be painting the kit really doesn't matter.

But the cool thing is that the effect parts is a different color.

I wanted the different color effect parts, but I couldn't find one, so I just I just got this one.

It'll be okay.

Oops.

Shouldn't have connected that part yet.

I'm kind of just like plowing ahead without really being attended the manual.

I guess I should pay attention to what I'm doing here.

Hey, Zuk earliest.

Do you have any video showing what you do to get rid of Spruce marks?

Um, not really.

I need to do that.

Yes.

Ah, not really.

I don't because, like, I have my old Gumpel building Siri's of videos, I think I showed like how I do it.

But I need to do an updated video because I know it's something that probably a lot of you guys gonna be seen those videos, but they're just not good and need to be redone.

And I need to do like, an update of video just about, like to clean.

They get rid of the Mars because that has got to be one of the most common questions, like in regarding building.

One of the most common questions that I have seen people asking and to me or just in general, is about numb marks and especially like the white numbers, the stress marks that you get from a moving nerves.

I see that question all the time.

And so, yeah, I feel like I really should make some sort of video addressing that just to help all the people who are wondering about that?

Uh, yeah, it's It's something I've been meaning to.

D'oh!

All right, let's see the face.

The color separation on this kid is really great.

You here for the face, actually, have this separated part that would give you, like, the kind of red, like scars under the eyes.

Sort of look, They have actual green peace here for the eyes and head camera as well.

But we have a sticker for the eyes as well.

So I'm gonna use that just to cover it up.

You just have a little bit of black paint, Just cover up, outline around the eyes, and you could just use the included piece.

But the green is the same green that is used for, like, the weapons parts in the backpack.

So it's not really, quite necessarily the right kind of looking green for a Gundam eyes necessarily.

So I think this full sticker is still gonna be a good option for this one for the time being.

Anyway.

So that is in there.

They need to put this into the front of the head.

A lot of times in HD kits like the face part.

You'll put that attached onto the back of the head first, but it actually goes into the front first.

It's a good thing I check the manual briefly there and then I know you know that other sticker here for the cameras.

Well, I forgot to put on just pop that on there.

Uh, the sticker skills, Yes.

It's one of those things that what do they say?

Like, you do something 10,000 times and you become a master of it Was that I'm sure I've probably put on 10,000 stickers in my life at this point all to ultimately just take them off again.

But it's okay.

The thing I also didn't cut the thin didn't cut the safety flags on the beef in yet, But yeah, the color separation there on the face very nice in the detail had very cool as well.

So it's looking good.

They're for that hat.

Looks good.

Once the safety flags were cut on the head of the look even better.

But for now, it's fine.

All right, get out of the way.

Get this arm arms buildup, then as well.

Uh, Kale as How do you like the beef?

And I like to be thin on the destiny.

Yeah, Like I said before, the destiny is not really one of my favorite design, But there are certainly aspects of the design that I do like.

I do like the head design.

Quite a bit like the torso design.

I like like the gauntlet kind of things on the arm I'm not super into and really super long shoulders, the bits coming out of the shoulders, which I know like, are like throwing weapons, right, but not really super into their shoulders.

Being that long, pointy.

Uh, I want to h g gonna storm bringer.

That'd be pretty awesome, for sure.

An HD storming would be cool and see, I use metallic green Gonna marker and black for the eyes.

Yeah, that that works.

Just ask this.

Not a cz, Sharpe, is this.

It will be sharp later.

And has this not sure because I didn't call off the flags.

Yeah, uh, I should maybe do a dedicated video about that as well.

Ah, I'm sure I've covered how I remove the flags on the fins in different videos in the past before.

It's a work in progress, but just doing as its own sort of stand alone video, which has helped people find that if you're looking for on YouTube how to improve the look of H G Gundam defense, whatever, as it's a separate standalone video, something people can easily find and watch it, that's what they're particularly looking for.

Ah, and let's see jet maxims that I ordered the Marco c'est using your code it use a condom store.

Thank you for using you as a gun store using my code.

Uh, Marco, c'est I wanted to mention this to you guys to thank you for bringing it up.

Uh, I also have talked about in the past couple months leading up to the release of that kid.

I was saying that I wasn't planning on getting it, but I've seen now that it's out and I've seen a couple of Japanese builders working on it on Twitter.

I did decide to get it because I think there's it looks like a pretty easy kid.

Well, I don't like the look of the Marcoses as it is.

It looks like a pretty easy kid to modify it.

Just a little bit to make it look so much better s so that's what my plan is to.

So with that one, I'm planning to kind of like a ah different kind of review where I'm gonna have ah, very quick and simple on boxing and review as like the first half of the video in the second half of the video about modifying the kit and showing you guys the completed bill.

So it'll be like a video.

Were expected to be a little bit longer then, just by nature of probably Maura in, like, 30 minutes, 35 minutes, probably in length.

But it'll be a video covering the whole thing.

Unboxing Building Review.

Also modifying, painting and showing the finished product.

Hold on one thing.

So something.

I've never done a video quite like that before.