So here is the frame arms based lard with bombardment unit.

So basically, as we can see here, is going to be very dark in color, mostly in that really dark brown.

And then you have some kind of accents of a really dark navy.

You have a few lighter accents in that light gray color, which are gonna be popping a little bit.

But overall, the color scheme a little bit underwhelming.

I think it does, sort of.

I think maybe they were going for a sort of special ops sort of looking design for the color scheme for this, having it, us being like, really dark in color like that.

But ultimately, I think I'm definitely looking forward to giving this a paint job.

It's in different colors.

But if you ever built the base Lord or the cut list different versions of this world, of course the main body is going to be mostly the same as the cool new head and then obviously the cool new shoulder parts to hold on the freestyle bazookas.

That's gonna be pretty much what's new about this.

So I'm not really a whole lot new compared to other, different versions.

Hopefully, this review will help you guys decide if this is a particular version of the base.

Are you might be interested or not?

Maybe you like the design overall when we've been out this particular version.

If you want to check out one of their different versions of the kids, you know, hopefully this review will help you in your deciding.

So, as always, guys, before we get into a just huge thanks to us, I got in store for their support.

In the supporting this review, you wanna check going to their site down in the video description below and click that and also use my coupon code.

There's not really is tend to save 10% off everything on their side.

They've got a bunch of frame arm stuff, So check that out.

If you're interested.

Obviously everything else Gundam, wing arms, girls, all that sort of cool stuff as well.

But let's get into talking about the kid here a bit more.

All right, so, first up for the accessories you have this really nice she of waterside cows here you got the cool 05 logos and just a bunch of little marking logos and stuff for around on the design just to give you a close up Look at those who can see you got some caution and warning logos.

There's this little circles, little marking bits.

So be Kyle's look really nice and not a lot of frame.

Our muskets do usually come with water saidi cows, so this is a nice inclusion.

Then we've got some hand options.

You've got the closed fists there, as well as a set of open hands, like so and a set of weapon holding hands.

So pretty standard for a frame or musket.

And then, just among our leftover pieces, you have the pieces to make just the regular base lard head if you want, and you also have the original based large shoulder armor.

If you prefer that so you could do like half and half have just like one shoulder with the bazooka on and the other shoulder, just the original based large shoulder armor.

Something like that is pretty cool.

So it's nice to really see have all these parts included to be able to create the original shoulder armor for this, except you will have to use the cap here that's used for the shoulder armor on here.

This top part you only have two of those, so you can't make four full shoulder armor parts.

With this, you will have to take that off there and put onto here out of the box.

I'd have to say the main downside of this kid is just going to be how flimsy it is.

It is going to be pretty loose, kind of floppy in certain areas.

So just getting it to stand up, especially with these things attached onto his shoulders, were gonna be very heavy once I think they're actually held in the hand there.

Maybe gonna be a little bit easier to manage.

But it does have some kind of weight issues.

And just like some looseness issues so you'll see, you might want to have to glue put some glue on some of these joints just to stiffen them up or of painting.

Of course.

Just quickly run through some of the articulation the head will go up to about there.

That's about it.

We do have a clear blue part in there for the visor, but it's gonna be kind of hard to see.

Easier to see this clear blue part here on the front of the chest head will go up to there and then down to there.

Then, of course, you can rotate around to the sides.

No problem with that.

Here in the stomach section.

We have some Ford and back movement here, but again, this is one of the particularly loose points that don't want to tighten that up.

There's no side to side band, but we do have some rotation here at the middle section as well.

Shoulders are on a ball.

Doing that will swing Ford and back as well as up and down a little bit there at the shoulder.

Otherwise, you can move the shoulder armor by itself and bring the arm out to about 90 degrees to the body like so.

And then the arm will just work as usual, rotates there at the top and a double joint at the elbow is gonna give you more than 90 degrees.

But that's about it.

Before you can see it's actually starting to come apart.

They're so these firearms kits all have a double joint at the elbow, but a lot of them just because of the armor.

They don't actually utilize a full bend there.

It's usually about 90 degrees or so before they start to pull out of the socket there a little bit.

But just due to the design of armor hand, is this plugged in via straight peg?

So that's only just gonna rotate there.

But then there is a joint at the base of the wrist that will allow you to move the hand up and down here like that, as well as faras the bazooka shoulder part.

Obviously, this can just rotate around here on this track at the top.

You can also change the angle of that here.

You can also rotate that like that and then here as well.

And the bazooka itself handle will move forward and back like that.

This open part at the back will move up and down, up and down, like that opening clothes.

I wanted to say so with all of that articulation, you could even have this part like rotate around to the back and then this just up over the shoulder, something like that.

So I mean, there's a lot of articulation there with the positioning of the bazooka.

So hopefully that shouldn't be any sort of problem to actually get that into the hand and utilize that And some cool action posters and stuff don't hear too hip section.

The leg will go outs to about there, and Fordham back is not gonna be any problem at all cause you don't have any front or back skirt armor.

There is really to speak of it.

Also got some rotation here at the top of the leg and then are double jointed knee.

It's going thio Bend around like that like a little bit more than any degrees, but it's gonna be stepped a little bit by some of the armor there.

But you get a pretty nice and even therewith a separation of this part here.

Out the front, this little flap above the ankle does move up and down a little bit like that.

The ankle itself will move side to side and then forward to their back all the way back to their so really far pointing backwards there, up earning two feet.

Just that's what's gonna look like for the detail underneath the foot.

Well, the school of thruster bells around on the design are what make the base lard so cool.

In my opinion, I love that part of the design and also just point out some of these hard points here.

You can see 123 there on the side of the leg, one of the side of the arm.

There you have a hard point on top of the free stablize.

It goes around here on the back of a hard point here, which is where you could also plug in action based up underneath there.

You could also believe action bases there.

In that point up underneath the hip section, you've got plenty of heart of points built in for some added customization.

But on the flip side to that, we do also have a good amount of steam lines on the skin, of course.

So here on the top of the head, we have a steam line down the middle of the black part there, and actually really, that's kind of about it's far.

It's notable.

See minds on this kid, so it's actually one of the frame homes gets, I think probably has some of the fewest steam lines on with that one on the head being pretty much all there is, I guess here on the back of Forgot these, like Vince here on the back of steam lines down the middle of those in C as well those parts there on the backpack there.

So But, I mean, that's pretty minimal for a framers kiss.

So not too bad at all.

And then just for a quick size comparison here it is stood next to your standard H G and your standard master Grade 100 scale.

In 144 scale Gundam kids seek and see.

As usual, it's falling somewhere kind of in between.

It's kind of about the size of a small master grade, something like a masquerade wing kid or F 90 kids somewhere around the same typed and kind of general size as one of those, particularly the only thing that's really particularly not good about the action based connection for this.

Is that because it's ah kind of top heavy kit with those big bazookas attached onto there, and it's just on a circular peg.

So if you have the bazookas, if you have too much weight off to one side or the other, it's going to just kind of rotate around on the stand if you don't mean gravity is gonna weigh it down to one side, so it's kind of hard to stay straight on the stand.

So again, just another thing you could easily do to fix is just tighten the stand by just adding a coat of glue or paint or something on to the peg just to make it so.

It's really tight on there.

But you know, otherwise there's other things that you could do, but just one of those things.

You just have to be careful when you're putting this up on the stand.

It is going to be weighed down toe inside another kind of easily.

But overall, I think the kid is really super cool.

That's always most important thing to me.

It looks really cool.

I love that just the shape and design everything.

And it's really cool, like custom variant of the base largest.

Well, I think the priest out was because the freestyle was because our weapon that I really particularly like as you guys know, I use that for my Tristan custom build.

And it is available, of course, just on its own, as just a separate weapon you combined by itself.

So his particular very it just comes with two of them and just a custom parts to attach them onto the shoulders.

So I think it's a cool weapon to be added to this.

So it's kind of like taking a cool mecca plus a cool weapon.

You can't go wrong with that.

Like I said, the start of the review the color scheme out the box is not really particularly to my taste.

So I'm definitely gonna be changing that.

But it's really cool, pretty minimal in terms of seam lines that need fixing for it.

Just a little bit of fixing in terms, just tightening up some of the joints.

And that's really gonna be all you're gonna have to do to get this prep for painting.

Give it a nice paint job.

You got the waterside D calls included in the boxes.

Well, so that's nice.

Of course, this is a code book, your Web shop exclusive, so it is going to be kind of limited in terms of its availability, this particular version of that.

But again, this review should I hope to give you guys an idea of just the base lard frame, Um, skit in general, discordant sort of the overall look of that and sort of what it can do.

Obviously, their original kids of the base lawyer or the cut lists or the variants are not going to come with these particular weapons.

Load out.

But you can kind of get an idea of just the basic it anyway.

What that's like.

And if you want, check out a different version.

Better seem like that.

Hopefully, this review has been helpful for you guys.

So if you do you have any other further questions or comments?

Of course, about this.

Feel free to let me know down in the comments section below again, Thank you to us that got in store for their support and its frame arms Month guys to do, check out some different moms stuff and just share your frame stuff online.

If you're building anything currently or you want to pick up something, use that hash tag frame Arms month and so everyone can follow that and just see what everyone's working on.

Some cool for a mom stuff so we can go share the love of frame arms out there just to kind of give it a little more appreciation to some other Mecca plum Oh, kits of the Gundam for a change So that you guys all so much for watching.

And I've got more frame, ERM, stuff on the way for you guys.

So stay tuned.

We'll see you guys said.