Name: メガミデバイス バレットナイツランチャー UNBOXING (Megami Device - Bullet Knights Launcher UNBOXING)
Uploaded: 2021-01-14T09:49:14.000Z
Duration: 11 min 47 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

現在進行形

過去進行形

Guys, they were taking a look at your book is my gummy device split nights, Launcher says.

There's the Bullet Nights launcher and then the Lancer.

The launcher is the very into that has this very large launcher there.

As you'd imagine, the Lancer has a really huge lance, so that's kind of like the main thing of these.

But there's just really cool Megumi device kids here, as usual with all the other Megumi device kids.

It's got this cool matte black for the background, and then this nice gloss for, like, the big number and then the actual picture there, the illustration of the characters so really, really cool boxes for these that the gold is not like really super shiny gold, but it does still have a really nice look for this box.

It's always cool to check out this little paragraph of information they'll put on the front of the box here as well.

This is equipped with a long beam weapon that far exceeds the height of the community.

Launcher is specialized for ultra long distance combat due to its extreme size, the weapon is difficult to handle.

This is considered a weak point for launcher because the weight of the weapon must be countered with a large shield or to stabilize the unit's due to is a large diameter and high power output.

The launcher is a deadly weapon that is feared by my gummy players due to its ability to take down a target in a single blow.

So, yeah, that's pretty much my fears for the kid in general is that the thing is just gonna be too huge for it to hold opposing any good way.

But I know it does come with, like, an extra stand just for the gun, which you most certainly will need.

So let's take around the outside of locks here.

As always, Guys, this kid is sponsored by us again in stores.

The dude check out the link to its gonna store down in description below you can use the coupon code.

There is the earliest 10 to save 10% on everything on their site, including cool step from Kabuki like this.

So just the side the boxes has the big number 10 there in the series and Then let's go down here to bottom because the one cool feature of this design is it's gonna have a lot of this, like, intricate pattern around on it.

And that's just gonna be made up of water.

Saidi callously, you have included with this.

Just read the box without the decals you weren't gonna have all these little tiny color wraps around here on.

You will have to do some painting and use of waterside details to be all the nice full details out the back of the head got this cool wire is not sure how those air going to be like, but we'll find out I want to get the kid up.

And if there's going to be solid parts, which I think they could be, those might actually just be solid parts because in every photo, the shape kind of looks generally the same.

So none of those were solid parts are just a movable wire, kind of something like we saw with the stray.

Let's get recently, something sort of like that, possibly.

But And here is the armored down version of that will you can make if you have all the extra bits of armor parts off of there.

And then here's how it's gonna look just right out of the box.

You can see it's definitely missing a lot of the little color after everything just compared to that and that.

Still really nice to detail, and you can add in a little bit of color all over the place on that.

But it is going to be looking a little bit more plain forgiven face options for this kid.

They're pretty nice compared to some past releases from the face options haven't been all that interesting with these.

Have some pretty expressive faces here, so you should be able to do some pretty cool posing with those.

There's a decal She, too, can see pretty extensive with all these little markings.

Everything on there in this price for this kit was a 64 100 yen, so it's definitely a little bit more expensive, but it's gonna tell it's a pretty good sized box.

And with the giant weapons like that, you know that's going to add a little bit to the cost.

Of course, it's opening it up first thing.

After that, I got the big shield piece there at the start.

So we're gonna have just a whole bunch of runners in here.

Obviously, our skin done looking very pink ish off of that very pink tinted skin tone compared other releases that I've seen from the line so far.

We just got this kind of blond, yellowish color there for the hair.

A couple of the base is included there and then we have another base as well.

And then finally, our manual and D calendar here at the bottom of things because look, really, really nice.

You have them in some gold and silver on there, and then some red little bits there as well.

He's gonna look really nice on the Finnish kid.

The problem is that if you didn't want to have, like some shiny golden, shiny silver decals out of look on that so you could have to go with the metallic.

You can see we have some details for the eyes as well.

If you are going to repaint the faces and you want to stick those I decals back on there on the front of the manual.

Just the same illustration from the front of the box on the back.

You can actually see the extension to the end of the rifle there in this illustration, which you can see on the front of the box because it goes off the edge opening up to the front page and you can see just mechanical girls X armaments of miniature.

If you want to do some posed with this, you can always use some of these pictures at the front here for references.

Attached these parts, like on the side of the skirt bits onto the parts.

They're going off her head and the pot's on.

The that does look different now, so I'm guessing it is soft points.

Found them and yeah, they are movable wires and they're very rigid actually, so they will hold a pose really well.

Much stronger than the ones that was included with the straw.

You able to do cool poses like this with these kind of like scissor obits acting like that and then just the unarmored diversion and then a sort of launching version using the launcher, That's good.

And it's gonna be really hard to do any sort of like action posed with that gun.

And she'll do also transform into sort of like a thing that she can ride on.

We saw a picture that didn't point it out, but it was on the outside of the box here at the back.

We have the painting guide there in space like black gold skin tone white, A little bit kind of off.

Why here for these parts and the decal marking guide here and see where to place all the decals around on that and about the I D cows there, the bottom as well.

Otherwise everything in between there is just kind of as normally of our parts list here.

The front, all these great out bits are parts that are left over that you won't use and then it just all through the construction of that in between there and that the back.

Of course, it shows you some different, like equipping options, how to equip some different things and then how to use all of that stuff.

You can see how it attaches onto the riding kind of form, how it's riding the launcher and shield together like that.

So let's get through all the runners, our theory of our face options.

As always, the pre printing on these is amazing.

I'm not going to try to express what these faces are.

I'm not exactly sure what to call them, but you can see what the base look like.

We have this extra base, but I think this is the way it's meant to be used for holding up the rifle.

As as you'll see, it's a little different from the other two bases that we have included with this and again the two wires here that will go or they're on the back of the head and her hand options.

In this case, which is all molded on this single runner, we've got closed this open, expressive hands, trigger finger hands holding hands open and resting hands.

And then a set of trigger finger hands and holding hands with fixed wrist.

So those are gonna be good for holding on to that very large weapon.

You won't have to worry about the risk being too weak, but still the whole rest of the arm has to be relied upon to hold up that giant weapon, which is not gonna be very likely.

So first off Runner A is a skin tone part here.

Looks like one part for the stomach and then neck and then parts for in head.

字幕リスト動画再生

メガミデバイスバレットナイツランチャー UNBOXING (Megami Device - Bullet Knights Launcher UNBOXING)

sort

bunch

trigger

solid

メガミデバイス バレットナイツランチャー UNBOXING (Megami Device - Bullet Knights Launcher UNBOXING)

sort

bunch

trigger

solid

メガミデバイスバレットナイツランチャー UNBOXING (Megami Device - Bullet Knights Launcher UNBOXING)