Placeholder Image

字幕表 動画を再生する

  • Well, Hey, guys, before we get into the review, just want to show you this and say thank you to everyone who came out and supported the live charity stream event that we had well building this kit live.

  • It was a lot of fun.

  • It took like, nine hours that was also including us.

  • The bonus build another sdk as well.

  • But things do you guys, we raise well over $4000 to help with rebuilding the natural wildlife there in Australia.

  • So that money is all going to the world wildlife on Australia.

  • If you guys missed the event or you do still want to donate, you can still donate.

  • The campaign is still open.

  • I'll have a link down below.

  • That'll go until March 31st.

  • Do you still have another week and 1/2 or so?

  • And the living addition T shirts that are a part of that campaign are also only gonna be available until the end of the month as well.

  • So if you want to buy one of those, you can check that out there as well.

  • All the profits from those will go to the charity also.

  • And so just once again thank you to us a goddamn store.

  • Hubby Co Australia, for donating prizes for the giveaways.

  • For that, the giveaways will be done at the end of the month once all the donations are in at that time.

  • So if you do still want to win anything from the giveaway, you can still don't you have to donate $5 or more.

  • And that will get you entered into the giveaway for that.

  • Also, thank you to Alex and then one of the anonymous donor for also donating a bunch of kids and then Alex and Jeff.

  • Especially big.

  • Thank you for hanging out during the live stream and helping out to during Live Stream as well.

  • So thank you guys both.

  • So much for help.

  • Thank you once again to Cory as well for his help on the design for the T shirt.

  • It's awesome artwork that he made with the strike Gundam Kangaroo.

  • And so just think it.

  • Everyone that was involved.

  • It was a great learning experience.

  • I'm looking forward to doing it again, but with the knowledge and with the experience that I gained from doing it this time there was things I think maybe you could have gone better or some things that I would like to do differently.

  • So it was all just a learning experience for next time.

  • But overall, I think it was a great success.

  • So we crushed the $3000 goal, which was to dye my hair and you guys voted and chose purple.

  • So now I have purple hair for the time being.

  • And then we made the $4000 gold just on the fly.

  • That would also get purple matching nails as well, which I don't have yet.

  • I'm gonna maybe do that tomorrow.

  • So you guys will see those in plenty of video soon enough on.

  • And then I made the goal for $5000 to be that I'm gonna be giving away a free HD commission.

  • That means obviously no mobile armors.

  • But any other HD that you guys want, I'll do a custom paint job as you like, just as like a normal commission.

  • Now, just be given away to the winner of that give away.

  • So we're not at the 5000 goal yet, But between now and March 31st if we reach that 5000 our goal And that will also be included in the give away a free HD commission to one person, Whoever is lucky enough to win that.

  • So all right, that is it for that.

  • Guys, I just wanted to thank you guys all so much.

  • And now let's get to the review.

  • All right, So here is how the kit looks when it's all particular.

  • Obviously, without all the extra stuff on, I just wonder first, just take a look at the basic strike Gundam with the new improvements to it Now, like we noticed in the building of the kids or in a box, anyway, or as just should be pretty apparent by this not really gonna be a whole lot changed underneath the hood.

  • It's gonna be all this kind of aesthetic stuff around the outside.

  • So we'll take a look at the new parts here more closely in more detail, and we just want to give you guys a look around with the kids what it looks like just with all the new parts in there.

  • Then, as I mentioned a few times during the Lifestream building, this, uh, the new parts.

  • I think we're really nice that they were added to areas that are like most eye catching.

  • So, like the front of the chest in front of the shoulder is the front of the arms, the knees, the front of the shin.

  • So like well, they didn't overhaul the entire armor set for this.

  • They just really made improvements in the areas that you would notice most easily anyway.

  • So I think that's that's pretty good.

  • And especially with all the new parts there for the head, the new head does look really nice as well.

  • And even though they didn't upgrade the Gundam structurally, structurally, the PG strike is a really great kid, and it still holds up really well.

  • So they just kind of made the outward appearance of it a little bit more modernized now.

  • So I think it's really nice to made this look like it's sort of more like a PG that would come out in, like, 19 4020 rather than feed you.

  • That came out way back when, all right, so just stick close up, Look at some of the stuff, see how the entire head, at least the outside of the head, is all new here all the armor.

  • The inside part is all the same, but yeah, it does look really nice.

  • The new angles of that life should say everything.

  • Except for the colored parts.

  • The red and yellow parts are not new.

  • All the white parts are news.

  • You have extra little events there on the side of like the inside of the face there.

  • Those are really cool the Vulcans and there are now chrome plated.

  • And the original kid, they're just regular dark gray plastic.

  • And we do have the led gimmick and here's you gonna move that part on the back and switch on the led, and that's gonna light up the eyes and the camera on the front of the head.

  • But as you'll notice as you'll notice, this part here on the back of the head is kind of loose.

  • So just make sure you're careful with that.

  • The eyes light up kind of all right.

  • But the light that grows up to the head cameras not really very visible at all.

  • So unless it's like in a very dark room, really not really gonna be able to see that very well.

  • It is because going up from the led through a clear plastic part and then threw another blue clear plastic part there.

  • And so even the eyes are not lit up that much.

  • So they led a little bit disappointing with this many of these new parts here for the chest, which, in my opinion, I like the addition of the silver parts.

  • They're the plated silver parts.

  • Those look nice, but the details a little bit too much detail added to the frontier.

  • And it's all just kind of like, doesn't really have a whole lot of uniformity to it seems like in this area they went for just like detail.

  • For the sake of detail.

  • They didn't really have a good layout for the detail here on the front of the chest.

  • In my opinion, the shoulders, the new parts here do also look pretty nice on the front and back.

  • And like the plated silver part, still good.

  • But I have This problem with this is that these parts fall off super easily.

  • The shoulder has the gimmick of this part sliding out, and then this part is supposed to open up like that, and this part is supposed to be connected onto here like this for, like, armor open gimmick for this.

  • But this connection is really super weak to hold that part onto there.

  • So it just falls off really easily like that.

  • You're probably gonna want to use some glue for that part.

  • Then new parts here for the front of the arm again just to include the silver plated parts there and there.

  • I do look pretty nice.

  • This big, flat, silver plated part.

  • They're also not really so sure about that.

  • Like one that's just like, little bits of detail poking out of this big, flat surface of silver there.

  • Not enough.

  • I'm really too into that.

  • I think I like it better here.

  • Like on a front skirt as well.

  • He got this new part.

  • This whole new armor for the front skirt is all new.

  • The detail here looks nice.

  • And the silver plated part looks nice there.

  • Down here in the knees as well.

  • Again, it looks cool cause you got just a little bit of that silver poking out.

  • And then when you bend the knee, you've got a whole lot more of that that can show in some nice detail there.

  • So these new parts here for than me, but at least just for the side parts here to expose more of that.

  • And also the new part here for the thigh armor exposes more of the frame in this crack between there.

  • So you got this part here?

  • The back is new.

  • It will just expose more of the inter frame there on the thigh.

  • Also, this part here for the side skirt, the main part of the Spice Girls, Not new.

  • But the opening door for that is new and it just has some more detail added onto there at the back.

  • Actually, nothing really too much new here except for the backside of the shoulders being new.

  • Otherwise, the whole back skirt back of the legs, nothing really new there at all.

  • Here, on the side of the legs, though, these parts are knew a little bit at a detail a little bit added link to these parts here on the side, not the top part of the bottom part of this part for the side of the legs.

  • Also, this little part here on the front of leg and then the front ankle armour is also knew the side I'm Kal Armor is not.

  • But this new ankle armour is new here to accommodate this plated silver part there in the front and also has an extra little events here on the side of the Anglo Murnau, which is a cool, little added detail, I think.

  • All right, let's go over just a couple other things here.

  • Then here is the beam rifle.

  • Nothing new about this, except for it's in a slightly different color from the original.

  • It's in that kind of slightly sparkly plastic here is that really dark, super dark gray that we have for the inner frame for this?

  • That has just a little bit of sparkle to it.

  • And we got the clear blue part there for the camera in there and that otherwise that's gonna be pretty much It's got this little bit, which will fold out their little tab, which will allow you to plug this onto the back skirt for storage.

  • Secondary handle will move side to side, and then, actually the trigger does actually move slightly as well.

  • It's kind of not really very noticeable, but is actually separate part that will smooth slightly, but otherwise that is pretty much a beam rifle is pretty nice, actually.

  • Like the beam rifle designed for this kid, it's pretty cool.

  • And I like that you complete down onto the back skirt s so that works pretty well.

  • And then we have the shield as well.

  • And this has a couple of moving parts in it here on the back that could move this part down to open up that kind of window there.

  • And we do actually have a clear plastic part in there for that little window in the shield.

  • And then the handle also move up and down.

  • You can slide that up and down here as well.

  • And in the connection, you'll notice it's missing a couple of parts.

  • Because with this kid, these are the parts for the sword strike.

  • And here is the connection for plugging this part into the back room.

  • We only have the parts to make one connection to the back of the arms.

  • So you have to choose whether you wanna have the connections built here for the shield or for the sword strike part.

  • So we're gonna use this part for the sword strikes.

  • So I didn't mother putting these on here for the shield.

  • But if you want to use the shield, then you can't use them here, So that is really unfortunate.

  • But it was huge.

  • Get Bend.

  • I couldn't give us another set of these, like, two parts that we need to make two connections and other reason why that is shit is because we have this new base here for this.

  • Well, it's not new, but it's, ah, base that was not included with the original kid.

  • So the base that we're going to use for this and you'll notice we have these two connection parts here at the bottom, that is for plugging on the shield and the beam rightfully so.

  • When the perfect strike is all loaded up with everything on it.

  • You don't really have any space for these, necessarily.

  • So you can plug these onto the base.

  • And so the beam rifle this blow going to there like that, and then your immense to plug the shield onto the other side down here onto there.

  • But you can't do that without the connection piece.

  • You need that connection piece in order to plug this onto the base so you can't even plugged us onto the base without that connection piece.

  • That's that.

  • I guess if you really wanted to display this on here, I think it wouldn't be too hard to just scratch, build some sort of connector glue this on here in some way that it's stuck on there sort of like that, but really is a shame They didn't give us that piece, but the base does work pretty well.

  • To hold up the Gundam cell really is a shame that we didn't get any sort of base with the original kid, cause the articulation of this kid is really nice, but on the ground, you know, there is only so much they can do with it.

  • Putting this up in the air is going to be such a better way to show off all the really nice articulation that this has now isn't necessarily the best demonstration of articulation.

  • But Lisa guys and get an idea does have all of a ton of articulation there and up on a base.

  • It's going to look so much better before we get into their packs and everything.

  • Just a couple of other accessories, just one skin.

  • Here's a look at our 1 60 skill Moula, Flocka figure here we have include with this and the two knives which will fit into the side skirts.

  • But I just couldn't put them into the side skirts yet and just probably won't for the time being that do fold open and you can hold those in the hand like that and they're pretty cool.

  • And then you've got just a bunch of, ah left of our parts here.

  • Now, if you guys saw on the unboxing you have all of the parts to make the Grand Slam sword except for the actual sword blade.

  • So if you just wanted to scratch, build a sword blade yourself, you could do that.

  • You have all the other parts in there already, so that's pretty easy to make.

  • I suppose the most of the other parts are just the armor parts that ever replaced with this.

  • And then there's a bunch of leftover parts from the sky grasshopper as well as there are a couple runners in there that were used for the sky Grasberg.

  • But we only need like, a couple of parts off them.

  • So you have a whole bunch of leftover sky grass for parts.

  • There And if you were a cure a fan and preferred the one No 1 60 skill here, a pilot figure.

  • You do have that as a leftover apart in here as well.

  • So first we turn this into this sword strike Gundam and we have the backpack for that which is pretty cool.

  • Has a lot of really nice detailed area.

  • The battery plugged into the top of their have this clear blue par for this camera and this articulated arm for holding onto the sword onto the backs.

  • This will just plug here onto the back, flip down that little door and plug this straight into their like so now for the shoulder armor.

  • Yet I figured that part was gonna fall off.

  • That's okay.

  • Can be off for the time being.

  • You'll just remove this little cap in the back, fell off to that school anyway.

  • Then you've got this extra piece you'll just plug onto there in its place.

  • Plug that down like that's enclosed this backup clothes that backup plug this blue part onto the top of here.

  • Put these white armor bet's back on, although technically, you could probably build this without those on because they don't actually really show.

  • And he does have these two halves which do have some really nice detail inside there.

  • These two have.

  • So just plug on the outside of here.

  • There you go.

  • It's gonna look like that.

  • This part can move up and down there.

  • And then we have this part which will pluck up into their life that alternatively, if you wanted to take this out and use this as a handheld weapon or throwing weapon or something, you can just hold onto the handle there.

  • And we've got this cool being effect part which will fit into here like this.

  • There we go like that So you can use that as a separate holding weapon or throwing weapons.

  • That's pretty awesome.

  • Then we've got the pens arise in which we saw briefly before us.

  • This will just plug onto the back of the arm and then you can have some movement here with that as well and some nice detail on color separation for this one as well.

  • Of course, these claws will open up like that so you can open those up.

  • It's also just comes out as a separate thing.

  • We've got the wire for that basically have two of these tiny little pieces that you'll feed the wire through into there.

  • And it's a real tight on the ends of their.

  • And you just plug each of those into one end like that in the same thing for the other end p that into the other end of the weapon Here, plug us onto the back of the arm.

  • Close that up like so before we come back to that, here is then the massive sword.

  • It is massive.

  • You and the kid is up on the base.

  • This sword still comes up higher than the total height of the kid, plus the fact that it's raised up on a base.

  • This thing is super long to put a number on that for you guys.

  • It looks like this comes out to be 40 centimeters in length.

  • This is the one as well does have a couple of effect parts when you plug into the back end of the sword here like that, and other one into kind of the main edge of the sword here need to plug in one end first and then kind of bended a bit to get the other end plugged in, you can kind of like Then straighten it out and it's gonna look something like that.

  • So that effect part, Yes, you you haven't pushed all the way and you can get it to be kind of straight.

  • Otherwise, it's gonna have a little bit of a boat to it.

  • But you know the effect.

  • It does still look pretty cool there, on both hands, and it's going to see you got a couple of attachment points where you complete the hands in for a good, solid grip onto their.

  • And speaking of hands, we have the addition of a new hand for this.

  • We have was set for the left and the right just fixed post hands.

  • Those who give you a good, solid grip on the weapons.

  • You want to worry about these massive weapons weighing down, putting any necessary weight on the hands, you can see we don't have the backs.

  • For those you have to switch the back of the hand from the articulated hands onto these fixed post hands.

  • You want to use these?

  • Ah, and also this white tip there at the end of the shield can be extended out like that.

  • It can pull that out for a little bit longer.

  • So that'll probably extended out maybe another centimeter or so in length.

  • So that is pretty awesome there.

  • And then, when not in use, imploring us onto the backpack here straight onto their like that, and then that will allow you to hold that up on there like so So the wire weapon.

  • I mean, the wire is heavy enough to hold up that claw, although you'll see the problem is that it will just want to rotate.

  • Gravity will just still like rotate that.

  • So you probably want to do something if you want to pose it with this in action something to glue the in place to keep that wire from rotating out of where it should be, but still does look pretty cool in use, I gotta say.

  • And I like the backpack in the just.

  • The real shame about this is that you have these really cool backpacks one for the sword strike and one for the launcher strikes separately.

  • There's cool little backpacks for that.

  • But if you're building this as the perfect strike using the oil, strike back back for that then you have just two extra backpacks that you have nothing to do with.

  • So obviously with this being up on the stand like that, I can't really put it on my rotating base for you guys as normal cell just kind of rotate this around.

  • So you guys gonna leave?

  • Just get a look at this.

  • But anyway, all right.

  • And then, yeah, with that big, massive sword.

  • Certainly the fixed post hand, I think, helps to get a good grip on that.

  • The secondary hand.

  • I don't even have it actually technically plugged into the attachment point.

  • I just have it sort of like, sort of gripping onto the handle there because it's actually kind of tricky to get plugged into the attachment point.

  • So but not really necessary.

  • It's that kind of there, like for added support, but not really particularly all that necessary.

  • In order to be able to hold this with two hands, you could pretty easily hold this with just one hand.

  • I imagine it wouldn't really look quite right with a sword this massive to just be holding it onto one hand just doesn't really look quite natural.

  • Which countries kind of looks like it makes sense to hold it with two hands, but yeah, it looks very cool.

  • With just massive sword, all rights for the long strike.

  • Once again, we've got a really cool backpack that will ultimately not go to any use.

  • But once again, some clear blue parts in there for the cameras for that, this is very cool.

  • And then we got the articulated arm for holding onto the massive cannon, which will see in a moment, but this will just rotate around.

  • You can rotate that around here, this little part there at the end, and the whole thing will move down like that.

  • So again, that just plug straight onto the backpack there, like so blowing on the shoulder of parts for this side are much easier because, basically, you just have just this connection piece, which you'll plug into their after you remove that cat part in there.

  • Almost forgot.

  • Whereas with the sword strike, there is a few parts that go together with this one.

  • Basically, to once you got that connection is just one big piece.

  • I just plugs right onto the top of their and there you go.

  • And it is pretty heavy, but it doesn't seem like it's weighing down the shoulder armor too badly.

  • So it's not too fancy.

  • You got some nice detail.

  • You got the yellow parts for the ends of their You got the school read part in their red part under there and the barrel for the Gatling gun here at the front will also extend out So you can pull that out to extend the length of that a little bit like that.

  • It looks all right.

  • Anything I just kind of prefer just stuck in there like that.

  • But of course, that moves out.

  • Of course, thes wing bits can also move on their own as well.

  • So it looks pretty awesome there on the shoulder like that.

  • But then, of course, the main attraction is the cannon.

  • And once again, this thing is pretty massive.

  • So you have some nice color separation on this as well.

  • Aside from just being loose one big block of green, you have a couple of great parts in there red yellow parts.

  • You're in the clear blue part in there for the camera back there in the handle part as well.

  • A clear blue part in there as well.

  • The main handle will move side to side like that.

  • You have the second or handle on this side, which will move in and out like so you have these bits here at the end, which will open up like that and then on the underside.

  • Deacon.

  • See, here is where that ball joint is gonna plug into from the backpack for storing this up on the back real quick.

  • Just to give you guys the length on this one as well.

  • It's slightly shorter than the sword coming in at around 38 a half, almost 39 centimeters long.

  • This will just plug straight here onto the backpack like that in that arm.

  • Well, it's not very substantial.

  • It does seem to be holding onto that pretty well.

  • Doesn't seem to be like.

  • Weighed down, by the way of that.

  • Holds on to it pretty well like that.

  • It looks like then to use this, we need to extend that up, rotate this down forward and try not to get hung up on the side skirts there and spent to rotate around like that.

  • And then you can grab onto the handle here and yes, As with any massive gun, it takes a little bit of fun angling to get it actually held, but does hold it pretty well.

  • As you can see, the articulated arm does kind of move as you need it to to get this up and move in a way to hold on to that pretty well.

  • This handle here, the secondary handle is a little bit short, little bit small for these massive hands.

  • So it kind of is just barely holding on to that.

  • And it doesn't really have any way to likes really securely grip onto that.

  • Also, I mentioned how these little yellow bits opened up like that, but then you can also extend out the barrel slightly.

  • There we go.

  • So, yeah, it's just a very little bit there.

  • Nothing really too much.

  • But the end of the barrel does slightly extend out a little bit there like that, and so is pretty cool.

  • I mean, everybody likes a giant robot with the giant gun, and it certainly seems to do the trick.

  • Now, this one as well if you use the fixed post hand even without the fix was handing, you could probably still hold on to this.

  • I mean, with the articulated arm connected on there, you could hold those with one hand.

  • You don't need to put two hands on this, but again, I think just for the size that it just looks so much better.

  • Looks more natural to be holding with two hands.

  • It would be kind of unthinkable for it to be wielding a gun this size with just one hand on the wheel before we go.

  • Full perfect striker do wantto also.

  • Then take a look at the ale strike packs.

  • So this is mostly old, but it does have a few new parts in there, So my old I mean, obviously this didn't come with the original p d strike, but it came with the PG Strike Rouge gets.

  • So this is kind of mostly old, like being saber handles have a C minus in the middle of them, unfortunately, but overall, this does look pretty cool.

  • The most of the new parts are gonna be here in the joints for the wings.

  • Well, the wings will move kind of almost all the way.

  • Vertical and down like two there.

  • You can actually pull this joint out a little bit from the body, and that will actually allow you to bring the wings up higher and lower all the way down like that.

  • Otherwise, I don't really know what else is too much with the point of that joint, but it is a new joint that will allow you further articulation there.

  • Otherwise, the flaps on this do also move like that.

  • Just the plugs being super handles are on bowl giants That could move those around.

  • Of course, these parts down here.

  • Also, it can be rumor, rotated round as well.

  • And there is a lot of really nice detail on this.

  • Even though these are mostly old parts, you can see just how nice detail what's even on just the old version of this.

  • Now these also these little flaps, and here it can be rotated individually kind of tight, and I don't really want to break that.

  • But you can see each one of these little flaps and there can be moved individually.

  • So to make the oil strike once again, all you have to do is just plug this straight into the back there for the white stabilizer.

  • There in the center, that's also a new piece there that includes this extra big, long thin on it.

  • The original piece didn't have that big, sharp Finn at the center, so that's also a new addition to this version of the kit.

  • And then we have the battery pack attachment for this.

  • Let's just plug up onto you on her side.

  • But I just didn't want to show you some of the articulation of this.

  • Each one of these can be articulated slightly up and down so you could rotate these all up together like that or all down like that.

  • Display them out and they also have a little bit of rotation in there as well, so you could have them slightly rotated like that.

  • So these do it.

  • It's all the same that is, plug into each other and it's plugged up into there.

  • So you could, if you want to.

  • Just only have two could only have two or one or three or all four.

  • You can kind of choose that plugs up underneath the backpack there and there you go.

  • Honestly, never really been too big of a fan of the look.

  • All the battery packs attached there onto the backpack I get kind of what they're therefore, but I just don't really care too much for the look of that.

  • But still, it does add Maur stuff to a kit that already is gonna be very fully loaded once we get this all put together.

  • So let me get a whole fully loaded up.

  • All right?

  • So here, with the backpack and both the shoulder equipment on there and the agreement there on the arm as well, one of the thing I do want to also point out to you guys, you have a few of these parts which are not left over Florence.

  • These air parts that you will need to use if you are going to be using the sky grasshopper.

  • So if you do have the sky, grasp it and you want to attach some of these new parts onto there, you need to keep these parts to do that.

  • I don't have a sky grass burr on hand.

  • Unfortunately to show you guys but here where you can see what I mean.

  • You can attach, they'll strike, pack onto their you can attach launcher packing striker facts onto the sky grass, bro.

  • Using those connection pieces so make sure you hang on to those if you want to be able to make any of these now for attaching these massive weapons onto the backpack You see, we have hard points here on the side of a ll pack.

  • That's where these air gonna be plucked onto the massive cannon on that side and sword on the other side.

  • Here and there Now finally, is almost everything.

  • Now they have those weapons flow down to there.

  • We do also have beams ever affect parts for the saber handles up there on the rail strike backpacks.

  • So of course you have to have those as well.

  • And finally, at long last, here it is, guys.

  • And surprisingly, you can actually pretty faithfully recreate the image that's used for the promotion of this kid.

  • And it looks pretty awesome.

  • I gotta say, like I've been saying like, the entire time, I'm not totally into the perfect strike with all the stuff on it, cause it's just so much stuff on.

  • It's a little bit overloaded, in my opinion, but I gotta admit, it does look pretty awesome once you have everything loaded on there just in this massive 1 60 scale like this.

  • It does look really cool now, a couple little things that I had to do to kind of trick it was to kind of move the giant cannon.

  • The back end of that was too long and able to hold it at the right angle.

  • We need to re create this post.

  • You had to kind of switch.

  • That'll wrote.

  • The cannon should be on the outside and the articulated arm for that should be on the inside.

  • You had to switch.

  • That's that.

  • The back end of the cannon goes back up like underneath the backpack there.

  • And the articulated arm is actually on the outside of that to be able to get this at the right outward angle that you need for that.

  • And also one thing I should be sure to mention to you guys is that up in the back of the strike?

  • Gundam.

  • It's totally involved.

  • We'll see now at this point, but at the very base of like the lower back of this, where you can imagine if a Gundam or to have a tramp stamp that spot on the back of this Gundam.

  • There's extra little piece that you add on to this that is not included with the original get Obviously didn't have a massive backpack, but now that it has this massive backpack on there in order to keep the kid from bending backwards due to the weight of the backpack pulling it backwards, there's a little piece to add into their that stabilizes that so that'll keep it upright and you can actually change the pose of the arm here of the bass.

  • You could set it to be like Maur for, but it probably wouldn't be a good idea.

  • You have so much weight.

  • Probably fall down Sylvester's keep the base as it is.

  • But if you wanted to fix that in some way, you know, by modifying that gluing it are probably you need to put some pegs in there.

  • Some like that.

  • Some brass rods hold it in place.

  • You could do that to modify the base, to be able to hold out a slightly different angle rather than just straight up.

  • But I got to say, the thing does look really super cool like this.

  • Now that I'm seeing it all built up and all actually put on there, it does look cool enough that I think I could live with this kid being awfully loaded up like this.

  • I just might end up changing, coming some of the colors.

  • I think it's still just a little bit too colorful for me.

  • Ideally, I think probably well I'll end up doing with it eventually is just making it so that the striker packs are all like in the same color rather than being red, black, blue, green, yellow, all the different colors of the rainbow.

  • There like that doesn't see as I'm moving it around, kind of wobbling a little bit.

  • But still, it does feel really stable as long as you're not just like moving it around like that and you, even though I am.

  • But we can run like that.

  • I do have a pretty good faith that it's not gonna fall off.

  • It's on there pretty well in the base.

  • So I got to say you guys is a very expensive set, but here's my final take on this kid.

  • If you think that this looks awesome and you would love to have it, then I would say definitely go for it.

  • There's nothing about this kid that I would say would make me recommend you guys to not buy except for the price.

  • If you can stomach the price and you like it, I would say go for it.

  • But that's the only thing that I sort of nothingness dislike is not the right word, but the only thing Ah, for this for me, For a kid this big and this expensive there's almost too many options with you being able to create just the regular strike gun of the oil strike on on this or strike gun them.

  • The launcher strike going on the perfect strike Gundam.

  • To have to choose is kind of a shame, cause, of course, probably most people would end up put building it like this the perfect strike with everything on there.

  • But if you were really super big fan of, like, just the sword strike gun them, you could build it up like that.

  • Then you just have a ton of left or parts that you kind of have nothing to do with unless you buy another PG strike which, you know, if you're building, were buying and building multiple PDC strikes.

  • That price tag for this, which is already really high is gonna go up exponentially higher if you're behind us.

  • More of this, the base get.

  • And like I said in the M boxing, unfortunately, this version of the base strike gonna is not available.

  • So you would have to do is buy just the original kit, which doesn't have all the extra detail added onto it.

  • Now all these parts, all the striker packs will work on the original case so they will work fine.

  • You just won't have all the extra silver plated parts in the extra added detail on the new armor parts for this version of us.

  • So hopefully someday in the future Bend I will maybe make just this version of the strike Gundam available just on its own.

  • Sort of like they have just the original perfect grade, which, like only comes like just the rifle in the shield of contact.

  • That's it.

  • Just releasing an updated version of that with the new armor parts I think would be awesome.

  • I kind of doubt that they're ever going actually do that.

  • But fingers crossed.

  • I think that would make for awesome.

  • So if you wanted to buy this kid as well and then separate the striker packs, not have them all on one Gundam.

  • So that's just my two cents about that, Let me know.

  • You guys think about it down below and again big.

  • Thank you to everyone who came out and supported the charity stream.

  • You guys are awesome, and I'm really looking forward to doing that again someday in the future.

  • I had a lot of funds.

  • I hope that you guys have fun as well.

  • So that's a wrap for the perfect strike.

  • Big, massive kids.

  • So there was a lot of stuff to talk about, but I'm looking forward to hearing what you guys think about it.

  • And if you have any other further questions, of course, feel free to ask those down below.

  • If you are interested about some or details of just the articulation and like the cockpit opening hatch, stuff like that, I cover all that stuff in my review of just the regular perfect great strike Gundam a while back so it can go back and check that out.

  • Nothing about that stuff has changed with this kid.

  • So all that details I think I didn't need to go through again for this review was finally just again a big thank you to s a Gundam store as well.

  • Guys do Check out the link, check out their store, support them, if you can That be much appreciated.

  • So thank you guys all so much for watching.

  • I'll see you all next time.

  • Bye, guys.

Well, Hey, guys, before we get into the review, just want to show you this and say thank you to everyone who came out and supported the live charity stream event that we had well building this kit live.

字幕と単語

ワンタップで英和辞典検索 単語をクリックすると、意味が表示されます

B1 中級

PG パーフェクトストライクガンダム(レビュー (PG Perfect Strike Gundam (Review))

  • 0 0
    林宜悉 に公開 2021 年 01 月 14 日
動画の中の単語