Name: LEIFTECH SUMMERBOARDレビュー（購入前に見る）お客様の声 (COMPLETE LEIFTECH SUMMERBOARD REVIEW (WATCH BEFORE YOU BUY) Customer Breakdown)
Uploaded: 2021-01-14T09:47:29.000Z
Duration: 21 min 48 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

未来形

this episode is going to be all about Leave.

過去形

So you've probably seen my other videos on sleep Dick board All the different places I've gone, for example, written by the ocean near the river, in parks, in parking lots through large streets through small streets, and you've probably seen me arrived.

So as I ride all throughout Japan, I get a lot of questions on What's that board in this video?

I wanted to do a full breakdown on my experiences with the Leaf Tech board.

Don't worry, this is not a paid advertisement.

I'm gonna tell you everything based on my experiences for the last six months, the good and the bad.

I'll break this review down and several parts feel free to check the description below to skip to the relevant parts.

What is Leave tech to what's the right like three maintenance, four support and five my final thoughts.

All right, let's take this word out and get into the nitty gritty, so let's get into it.

What's leave Tech Leave Tech Elektronik Skateboard.

That's a bit different than most gay boards.

What separates leave tech between others electric skateboards is it has these two center castor wheels that sits in the center of the board alongside with outside four wheels, and it allows you to slide and carve like you on a snowboard, but it lets you do it on the street.

It's easily controlled by this Bluetooth remote, and it runs on these detachable batteries as you get better fighting the leaf tech board.

What you'll find is that you end up writing on these center wheels, like riding on these inline skates.

The outer wheels are mainly used for balance carving and sliding and stopping.

Let's go check out this board when you first get the board.

And there's a reason for that, because when you're first riding the board, you tend to fall a lot because, you know, writing on the center wheels, you don't want to be strapped to the board fall.

But as you get better, then these bindings actually help you the board like this.

Also, when you first get the board, you actually have these risers installed.

These risers sit right here on the actual board itself and what it does.

Is it pushes up the outer wheels, so there's less of a difference between center wheels and the other wheels.

When you have a little more balance, it's kind of like riding training wheels on a bike.

But as you get better than you, take out these risers, which allows you to more than when the rises we're rid.

So you guys might be wondering what this protector here is On the outside of the board in the front and the back of the board, some of the guys on the Forum showed me that you can actually buy this protector for your board just wraps around.

The reason I have it is because you know, when you carry your board, usually rest on the bottom of the board or the top of the board, so it just protects it.

You can see here, this is from me, just putting the board on the ground, and it just protects it.

You know, I've seen other people with a board, and what will happen is you know this will get dinged up and you want to just have a longer life.

I'll leave a link in the description below so that you guys conjecture not is going for your electric seaboard.

Let me show you how to connect the battery to the Bluetooth remote so that we can start going to ride this thing.

So the first thing you want to do is pop this guy open.

Usually what I do is I connect the batteries first, second connector in tucking tables, get the straps.

This guy and then put the battery lives just like that.

No board actually doesn't come with us about grow shops.

I put it on because these clubs tend to break and is actually my second battery cover.

I got the 1st 1 place because clips broke.

I didn't do it just for reinforcement, but strap on them just like this.

The last thing you want is the battery flying out while you're writing this point, that would be a disaster.

And all you have to do is press this center button here and it'll flash green for a second.

And then once it flashes blue here and flashes blue here, then you know that the board is connected so to go.

All you have to do is press the trigger to engage the signal and then press forward to accelerate and press back to engage the brakes.

So your wheel's on line, you're not going anywhere.

When the board starts, you're gonna have to align the wheels.

If the wheels aren't aligned, the board is gonna start where is gonna make some noise.

So what you need to do, I always make sure Castor wheels are moving forward one straight line.

They can actually be going like this in the same angle, and it worked.

But just as long as the two wheels are aligned facing the same direction, you don't actually need a push start.

You can actually start with just the wheels in line, but it takes extra batter powers like this.

So you want to do in this situation is do a push start because when you do a push start, it actually aligns the wheel so that they're all going the same direction way.

It's just like you're writing a snowboard.

Let's talk about sliding and breaking so there's two ways to stop.

There's region of breaking and to slide stops.

Leif Tech Board, like many of the other electrical boards, come with regenerated breaking.

What that means is, when you hit the brakes on the controller, it charges the battery during the time you're breaking.

I used to use this feature a lot when I first got the board, because it was just very easy.

As I got better, I stopped using just relied on the other wheels to slide and stop.

The only problem I found when you do the breaking is that now your horizontal.

When you've stopped and you want to start again, you have to realign, go forward and then you have to do pushed our kind of annoying.

But it's just, you know, it's part of the board going up hills Leaf tech advertised on this board goes up hills.

Reality is you can't actually start on him.

Well, well, maybe you can, but it's very difficult reason it's difficult is because, as I mentioned before, you have to do a push start, and when you're on a hill, it's really difficult to do that.

You probably see them going up a hill, but they have speed going up that hill.

When you want to go up the hill, you're gonna have to build up speed and usually want to do that flat ground.

The last thing you want to do it stop on that hill because it's gonna be difficult to start back.

Wait until you get to the top of the hill to stop.

If you can power through the hill and then stop at the top, otherwise you're gonna have restarting from a full stop mid way up the hill.

So where Ride this thing leave, then report that the board can go 23 miles an hour going at that speed, you better make sure that the road is smooth.

When I first got this board, I thought, Hey, cool.

It has his big longboard wheels on the outside, sucking go over bombs and cracks really easily, just like a longboard.

What I mentioned earlier is that you're riding pretty much on those center wheels.

The center wheels are half the width of the big longboard wheels, so you notice the cracks and the bumps a lot more than those long war bills.

So this road, it's okay to run on, but you don't want to ride on this thing for a long time.

It's not that enjoyable, but still right.

Some roads like this way too rough would not recommend going over at all.

I mean, you can kind of still go over it.

字幕リスト動画再生

LEIFTECH SUMMERBOARDレビュー（購入前に見る）お客様の声 (COMPLETE LEIFTECH SUMMERBOARD REVIEW (WATCH BEFORE YOU BUY) Customer Breakdown)

awesome

engage

trigger

experience