Name: 新品PCパーツのテスト方法 (How to test your new PC parts)
Uploaded: 2021-01-14T09:44:04.000Z
Duration: 22 min 32 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

You know, we spend a lot of time talking about how to build a computer and all that stuff.

程度の副詞

But, you know, we never really talk about how to prepare for building that computer.

基礎受動態

So today's video is really directed at you Person who just got your first gaming PC parts for Christmas or your wife or your anniversary or know that you got your wife.

And often I teach you guys how to build a computer.

I have failed to teach you how to prepare to build that computer.

So that's what we're gonna do today with these parts.

Never leave home in a hurry and wonder did I forget to close the garage door with WiFi enabled lift master garage door openers In the mike, you act smart technology and wireless connectivity mean you always know the status of your doors, while the Amazon key capabilities mean you'll never miss.

Another delivery to see the full lineup of garage door openers and features from Lift, Master and learn how to get Mike You connected.

Click the link in the description below that, we showed you plenty of videos and tutorials in the past of how to build a computer specifically how to build the tower part.

But, you know, there's some things you can do in preparation.

And prior to putting everything in your tower, that would get you the best results.

Some of the work flow of testing all your parts.

Make sure everything works kind of show you what the minimal like plug ins that you need to get all that going.

And I'm speaking directly to the first time builder, maybe someone that hasn't done in a really long time or maybe someone that's just never actually done this before because these are parts that I actually have to test these air for a build coming up that you guys probably have not seen by the time this goes live.

So I don't want to talk about what built that is, but it is another custom case mod type build, sort of like the destiny, too, but a whole different video game that we modeled it after so I have to test these parts.

And I don't want to do that with it in the system.

So we're gonna go ahead and kind of walk through that now, The parts that were testing here, I want to see if it'll work with this motherboard.

This is 64 gigabytes of G skill Tried and z r g b d c.

I don't know what the d C part means, but I digress.

So to 32 gigabytes sticks completely unnecessary.

But I've gotten used to work in any system I've tried yet.

Fortunately, Micro Center was willing to help us out by setting one of this is one of these aside so that we can get it tested.

Um, I'll put a link down the description below where you guys can actually go and check it out.

But I'm telling you right now, if you live near a micro center, you can physically go into you are not going to find better prices than micro center.

Anyone that's been there knows exactly what I'm talking about.

Well, yes, Antonia, the deals the bundle deals alone are insane.

So we've also got the RG crosshair eight impact.

We kind of did an overview of not that long ago.

And I told Jos and do a build with this With the 39 50 X, this was sent over to us by a Seuss.

And basically, it's just I t x it's a little bit longer.

I'm fairly certain this is what I'm gonna stick with.

If this is a 20 seventies super, Um, not a 20 t i or 20 super any of that.

Not every build I do has to be the top top top, top, top, top, top of the tops.

This right here is a revolt pro from Fantex.

This is a power supply that's actually capable of running to mother boards.

At the same time, I haven't decided if this is the one I'm gonna use in the build that this is all going to be going in, but nonetheless what I'm going to show you today.

It doesn't matter what power supply it is.

Obviously, it's the process of testing that matters now.

Often times you're gonna hear people talk about doing a bench test.

So what we're gonna do right here is gonna show you the bare minimum to get the system up and running and booted and potentially even get windows installed.

If you kind of want to get a head start, oftentimes you can install windows during this phase as well, so that you are able to kind of be up and running faster once your towers put together.

I'm not gonna be testing any drives today because I don't have any drives to put in this building yet still have to source those.

But we are only gonna need our mother board out of here.

We don't need any of the state of cables out of here unless you're testing your drive.

That's to say to Dr you're doing an m dot to you would install your and that too in there, obviously.

And we're just gonna take this guy and go right there in the box.

There's a lot of debate about whether or not you should put an anti static bag down and then put it down.

But a lot of people would argue, too, that the bag is designed to stop E S T r E s d or electrostatic discharge inside the bag and not the outside.

So just put it down the cardboard unless you want to hear people complaining to you for because they like to complain.

All right, so in preparation of the motherboard, you might notice.

Here, put these clips back on for the sake of demonstration.

Right now, this is going to be specific to a M.

If you're using seat until CPU, the retention is same toe for all the different colors that hold down is going to the same.

So Andy is known for having two different types because a clip type which has basically a metal bar that will go through the cooler and just clip on either one of these barbs.

You can see these are kind of like a little hooks.

Um, you'll find that some coolers use the hook style like that.

I'm gonna be doing a test right now by just using one of these rates style cooler.

They're called race, and it's already got pre applied thermal pace and the screw down screws right here, which grew into the back plate.

So to prepare this cooler for its tests or this motherboard, I've got to remove the four screws holding down thes Andy brackets.

But I'm gonna leave the back plate on, because if you take a look at it, there is a back plate right here.

So depending on the type of cooler that you're using if using a Iot or some sort of an air cooler or whatever, this is going to be the best time to get that all installed.

But if you're using a box cooler in a big if you got a box, school are available to you, and you've got a big old air corps that's going in the system.

You might want to install the air cooler after the fact, because sometimes they can get in the way of some of the motherboard screws toe.

Hold down the motherboard to the actual case.

Now, if using a name D, C, P U, it's actually really, really easy.

Pins are located on the CPU itself, where intel see few.

The pins are located on the motherboard, so for a M D or muscle arm to the side, there's a little tab that hold it down, and then, as you move it up, you'll see the entire trace lives.

The best way to remember which way this goes.

The lettering, at least for a rise in any way, will always go horizontal or parallel with the actual socket name of this.

字幕リスト動画再生

新品PCパーツのテスト方法 (How to test your new PC parts)

stuff

sort

force

express