Well, I refuse to let this turn in to the new post.

Malone build where it's Where's the bill?

Where is the bill?

Where's the bills?

We're gonna see how far we can get today.

I'm not percent positive we're gonna get done.

But I'd really hate for this to turn into a three parter.

But I digress.

We'll see how far we can get two days.

We have limited time in limited skill to get it done.

Video sponsored by Nor VPN, a service I've used for years and highly recommend you want people spying on your Internet connection.

I mean, that's regardless you're doing the important or not up there.

Why let people spy on your information Knew the biggest offender it spying on you is your I S P.

They want to slow you down and throttle your connection regardless of the speed you pay for because they shave your Internet traffic, we'll start shaping your own by encrypting it and using nor VPN and thousands of servers in over 61 country's.

Regardless of where you are, you can get connected fast and secure.

And you can start taking the Internet security serious by saving 75% off a three year membership and getting a month for free by using offer code.

Jace, two cents a checkout.

So stick it here I s P and start surfing securely by using nor VPN and again, 25% off a three year membership that brings it down to, like 2 99 a month.

That's less in a cup of coffee.

Is coffee more important than your Internet?

That's the question does link down below.

So I'm gonna show you guys some of the parts and stuff that we've got going in here.

There's one Titan, uh, hard in there right now.

We call it T Rex.

That's what video calls it.

I guess we've also got the other one sitting here in the box.

I want to just some of the comments on this build a lot of suggestions.

People had one.

I think the most common suggestion, J.

J.

You should totally check out the RGB Royal Ram as if we didn't already have it.

We've had this ram since before it launched.

I just didn't know what I was gonna do with it.

It was like I never built a gold PC before.

And then the T.

Rex came out and I was like, Well, obviously that is the right use case for this Ram.

So we've obviously got that picked up a couple of 8 60 evos.

These aren't even technically for this build.

I just got it there.

One terabyte drives up.

I put in India, me in here, if I have anymore.

Otherwise, we can add that after the fact motherboard, we picked up the X 2 99 Deluxe two.

So this is the the second version of the original deluxe that came out because a ceases kind of done like, sort of a generational refresh of this.

So it's ah, it's not an evolutionary chain, just more of a white, not revolutionary evolutionary.

Whatever.

It's a minor upgrade.

Apparently, it can have on handle a 79 uh, 80 x E, which is a 16 corps or 18 core 32 math I'd originally planned on using my 16 core from my work station upstairs, but then I remembered we have that deleted 79 80 xy while why don't I just used that.

Let's also talk about some of the water cooling parts and how even a water cooling expert such as myself can make stupid mistakes like, for instance, ordering the wrong radiator.

That's gonna be way too thick now.

Yes, this is an XY 360 cool stream XY XY stands for Extreme Edition, and this would a force fit in the front of the case.

The problem is, once you an ad fan thickness and then you add my reservoir combo, which I want amount to it.

I then don't have enough room to clear the back of the graphics cards, so I'm probably getting abusing a different radio have in stock because three extreme is 60 millimeters thick.

That's with three C's seriously, easily a C per 20 mil.

And there's 60 so 20 times 360.

So if I were toe can't even get this in their ad 25 more millimeters for the fan thickness, which would I want to put the fans on the inside there, pushes it out to about there.

I don't know.

We might end up having enough room for it because there's only one way to find out.

Speaking of combo, we're using the five.

This is the photo on 1 70 from excess PC Glass Reservoir.

I love these.

The other comments some people said was J.

Why don't you just water cool the graphics cards?

Because as soon as I pull this cooler off of here, there's no more gold.

The entire theme of this build is based on the gold T.

Rex.

So I'm leaving the coolers on here for multiple reasons.

One that we can take.

The Mounties leave.

I want to use them to meet Steve.

And two, there are theme.

So yeah, let's just kind of see how far we get way.

Stop the montage.

Just just enough of that crap.

So a lot of you guys always say J just take us along for the ride.

Talk about what you're doing.

Don't just make beautiful montages and stuff.

Well, that's we're gonna do today because these builds.

No matter how much you plan or think you've planned, things go wrong.

So this is the Pro TEM right?

Pro TEM?

It's called photons.

That's it photon a couple things I don't like about it.

Um, I've never really actually mounted this to the radiator like This is meant to be spaced properly to be mounted to the radiator.

But what we learned they're not really have a choice here is that if you mounted to the rat, it's not centered like they could have made it longer.

That could've made a little peace longer.

There's no side to side adjustment on it all.

As you can see, it's like it can't slide this way.

I don't know why they didn't just make this part longer so that it would be centered in the radiator.

So my oh city is gonna be a little going crazy.

But that's not the only other thing.

One one of the things we've always complained about is like, man, why people keep using Molex Molik's Death to Molex.

Death Molex.

So where did the state a version?

I was like, Oh, crap, It's not sleep.

That's okay, I'll sleeve it.

Oh, well, I can't depend this now.

Yes, I could cut it.

Sleeve it, sauder it and then all that.

But why?

Why deal with all that?

So we're fortunate enough around here to what?

We have other parts laying around that we can use.

The other issue here is this just uses it says excess PC, but it's a laying d five pump.

Any D five is the same manufacturer laying, and they just put a different sticker on it.

This is the ugly retention ring that comes with all D five basic pumps.

I think Swift Tech was one.

The first prince actually start using the D five and this is the ring that was used.

So that's obviously ugly in there.

This is more of a beauty build.

I remember that I had one of these Prodi, um, covers from singularity computers.

So Singularity sells this stuff, including beautiful reservoirs and stuff which if I had more lead time before I ordered this stuff, then I would probably got in the podium kit like I used in my d five.

In fact, I will be taking the defied build a part about gathering or salvaging out of there and putting in this bill.

But I just haven't taken it system apart yet.

So we're gonna be replacing this with this cap, and we'll be replacing the pump entirely with one of my P w M d five pumps out of an E K reservoir.

So that's the nice thing about using anything that's laying D d.

C or D five rather than some of the more proprietary like pumps to some of the certain brands is the fact that you can salvage them out of other parts.

And the reason why I'm using this one is because it is sleeved.

Getting all toe like line up can be a little bit for the pain of the night.

I'm an expert, guys, this is what you spend a lot of time doing.

No matter how many systems you've built, honey water cooling runs, you've made any rigid tubes you bent.

You have to spend a lot of time just kind of looking at it and imagining how it's gonna look.

And right now, I've got to think about the fact I've got tubes that are gonna be coming out of this a drain port I've got a deal with, and part of me is like, Do I just want to go with generate radio right now?

I've got a 30 mil.

I think a single 30 mil would be fine for a 70 80 XY because the only thing that's gonna be in the loop over clocking it very far either.

Maybe like 4.2.

This was provided by cable mod.

I went on to their people configuration websites and I chose the colors and stuff that I wanted actually went with pear cord, not a PVC.

It's leaving a river.

It's called.

They told me the color gold I wanted would not have basically worked with the nylon.

But this Oh, my God.

Look at this frickin money through that.

And they're the men there pay record, but they can still be trained.

So and then I also got like on the P S u cables and stuff for, like, the eight pin power and all that we went with White aluminium cable comes so there's actually metal cable comes on there, so that gold turned out so much better.

This is honestly, the first time I opened it, as you guys saw, I just trusted that everything was perfect.

And I think this is a really good gold between our painted gold and the color of the T rex on there.

So you can see.

I know I cannot wait to get these in there.

That's just just like that.

Would you just look at it.

So this is what I come up with, like, third or fourth time.

I've come up with something for this build.

The issue stems from get again from the fact that I went with way to think of a radiator on accident.

If I'd gotten the standard 40 mill, then we wouldn't have had nearly as much of a problem.

And now I had to actually come up with a solution.

So I've got my Alfa cool radiator with my Corsair fans on here, which are white rgb.

And then I've got an e k x rays on here with RGB, which we're just going to set the white, which will actually illuminate the reservoir, which will look needle kind of put some light on that empty area of the kit or the kit that the case three Germany models recently And then this is just gonna go down to the pump which is going to down below it like this, which will then go out to the rest of the system.

So, yeah, this is a little bit Ah, weird.

Technically, but that's all we got is the only thing we can do to make it work.

Um Either that or I postpone this build even farther.

I don't know if I want to, and I may still change this, but this is the problem.

That's why some of the bills that I do take so long so I can do now is I got to change the top out back to this top.

And that way I can plumb up fitting because at least we're gonna able to go from the rad right to the top of the reservoir and then out of the reservoir into the pump so that at least takes care of kind of this area of it.

I would love to be able to just use a pump down here as a reservoir combo, but that's not working with amount of space that I have technically.

And I don't have a d five version of the Prodi, um, which I would love to use so you can see how this works out.

Worst case scenario, we order or go by what we need and we continue it another day.

Either way, we're gonna continue another day because it's not going to be done today.

There is no way, no way, no how that could be done today.

All right, so this is what we got.

So far as you see, I put in all the cable so you can kind of see all the gold sort of tying.

And we have the gold fittings here from premature what you're not too happy with.

There's a lot of silver showing through.

It's a very light dusting of gold, and they're not consistent.

Like all the fittings and the package have a different color consistency to them.

So I'm not in the painting.

Those myself with the gold ran the gold cables and hectic.

It's that we even have gold State of cables for this.

I like gold.

Can I paint his?

Yoo hoo.

Go.

So, yeah, this is how it's turning out in the salads overall.

Gonna look.

So I've got a lot of cable comes on these cables for a couple of reasons.

One because they are Perik ord.

The sleeping themselves are not gonna help keep it into position.

So usually pay record flops around little bit more to because we are using the pro cables on the the sleeping kit here from cable mod.

It's a sticker cable, which means that we can still train it.

So I've got all these here sort of training the cables in the position I want them to be in.

Don't know if I'm to run these back to the motherboard tray or just go through this hole right here.

The pump is down here and I'll feel concealed so I'll be able to rotate the pump this way because it's just going straight down to the top of the pump for the inlet from the reservoir.

And then I can use these two fittings.

One of them's an out and I could just use a 90 have it come straight up and then out here into the CPU and then from a CPU to the radiator, those are the only two runs I'm gonna have to do.