This is what happens when you take a very enthusiasts company with the modern community.

You get a mashup collaboration known as the Ikea Fluid Gaming X 600.

Siri's Stay well, look specifically at the x 603 today's video, sponsored by Mass Drop in the Sun Heizer PC 37.

Ex professional grade gaming headset Sennheiser is known for its legendary sound quality, and now you could have the best of both worlds without compromising my quality, making it the perfect choice for gamers of professionals alike.

The detachable 10 foot cable on 3.5 millimeter plugs and share maximum compatibility.

We're running your own amplifiers without taking up an additional USB slot to learn more about the Sennheiser PC.

37 exits for master up.

Click the link in the description below, but I'm wearing these gloves because this chassis, if you guys watched my Denver Micro Center kind of ah, grand opening that we did, and I did that build.

This is essentially the same thing, but they were just launching it around that time.

So the idea here is that this is utilizing a chassis that was designed by Der Bauer in conjunction with Lian Lee.

Well, obviously talk about all that, but back then, the system was just starting to kind of make it into the retail space, at least at Micro Center, because that's the only place you could actually get.

This system is at micro Center, but I built one on stage, and obviously when you get it, it is already put together and built because you can see this is all packed up with insta pack.

But here it is the power spec x 603 But it utilizes the Lien Lee dynamic 011 which was like I said, a chassis that was designed in collaboration with their Bauer world class, over clocker and modern.

And so obviously cooling is a important one.

With this chest, you know, there's three models you can choose from the X 60162 and 603 Now, we're gonna take a look at some of the different specs and stuff that you can get.

We'll go down the list here on the left.

What I found was that the reason why I didn't do it with Micro Center is because micro Center is not available everywhere.

There's only 25 stores across the country, whereas my new egg does ship across the country and with micro center, you can't buy things like si, pues and stuff and have them mail to you.

So I kind of wanted to see how the price of this compares to, say, putting in ah cart would like Amazon or new egg and what we found especially for the 601 The pricing was extremely competitive.

In fact, they advertise that you could get this system pre built and sent to you because there's only those three specs like you can't customize it or have parts changed.

It is what it is.

Those are the three that's it is.

You can get it for not much more than the cost of a nao.

But of course, this is is using the fluid gaming system in here, which is theologian.

Um, all all aluminum pieces have no issues with galvanic corrosion, but your CPU is water cooled.

Andrew GPO's water cooled.

See what else we get here inside this little pouch Cesaire All your extra unused cables because obviously, it is a modular power supply.

Power cable antennas because it isn't a Seuss Z 3 90 strict e rubber block.

Not sure what that's for.

Are you the extension cables, extra screws that came with the case, some plugs and all that stuff.

Extra stated cables suspect.

Why's the X 603 comes with an Intel 9700 k.

Obviously.

Windows 10 Pro 64 bit.

This the strict Z 3 90 gaming motherboard I got says System Board that one kind of call it something different.

Archie X 2080 p c E.

Graphics card.

16 gigabytes of DDR four Ram.

Now the picture shows G skill.

Tried it.

ZR, DBS.

We'll see what's in here.

500 gigabytes.

Solid state boot drive.

It's actually an Envy me drive, at least from what we found online.

Think it was a 750 watt power supply, but we'll see when we actually get in there.

It's not showing here on the box what it is, but let's go ahead.

Look at this and it does.

It gets empty, so we will be filling it.

So obviously, that's how they're shipping it.

I was kind of wondering how they ship these, but they shipped them empty, so that way they don't get damaged.

Sorry till you see, in terms of packing material to nice clothes, cell foam, enough to make Linus and it's all over himself.

All right, so I get the sense it back out here to do that is to screws on the back.

If you've never seen a dynamic 00011 pulls off like this blast comes straight up like that, there is the inside and units pack.

Everything is in place.

That is a perfectly sized.

It's too packed right there, isn't it?

You ready to still in there?

Look at that.

So it's got residue like water droplets in there because obviously they pre test these.

Here it comes, the peel porn, which apparently is a thing.

I won't say anything.

We'll just let them.

We'll just have to make it the sound for Phil.

So this also kind of goes in the same way like that.

She had to take this off.

We'll get to the Phil Port, but you can see it's got these little grooves right here, and they just fit into these little channels.

So you set the little tabs in the bottom, and then you just slide it into place.

That's the way that the dynamic chassis works.

Let's just kind of get right into filling it up.

I guess I kind of need to do that.

I don't want to run in that water, All right, so about filling it real quick because the manual shows you here using a field bottle like this, which has a little tube that you can kind of push down in there.

I don't have one of these or not.

I never have.

I probably should, because it really helps with systems like this, because we are filling in the distribution block.

This distribution block doubles as a reservoir as well.

You have to ports on here, one of the top left corner, one on the bottom, right corner, so in the way it's sitting on its feet, this would be the dream, and this would be the fill.

Air has to go to come out because it's a sealed system.

It's not like there's another port over here, which would have been fantastic if they had made just another port right here.

So you can crack this open and allow air out.

The water can't go in until the air comes out.

Its volume displacement And what you'll notice is that if it's kind of boring going in there, see how that just bubbled like that.

If you fill this all up one, if you're not paying attention, you're gonna overfill this too.

As the air comes out, it causes a bubble in a kind of splash.

So that's kind of sucky.

So if you had a bottle like they show in the picture here and you could put the tube down in there and it's not sealed like this fitting is, then that wouldn't be a problem.

But since I don't have that, it's kind of a problem for me.

So I'm gonna try here right now.

Is that doing this fitting?

Don't you think I just dribbled down the front and I'll try just kind of poking my funnel in there, which is not a euphemism, I swear.

So if I do it like this and then tilt the system back or they put something under the front to get it up higher than that should give me the desired effect that I'm looking for.

Here.

There we go.

See, Now we can control the Phil rate.

All right, so here it is, all pretty much assembled.

So the nice thing is, the front manifold right here, which also doubles as the reservoir is.

So this helps it bleed, as you kind of saw.

Normally, when I feel a system, I'll put the jumper on the power supply, fill it, turn on the power supply switch, let just the pump run, let it kind of fill the system, fill it up, do it a few times, so there's no chance of running the CPU block dry, which would be bad for the CPU.

Now, if any fluid is touching the block, it all even a little bit even has tons of air.

It will help.

But we were kind of like we realized that assumes I tilt it back and started filling it that as soon as the water got to about these top tubes right here, or even this bottom layer here, that air started pushing out and we saw the level going down, and it was sort of filling up the tubes and the radiator, so I kind of went, Wow, maybe we don't need toe.

Actually, fill this and use a jumper because there's no jumper included in this box, which we thought was kind of strange because it's included with the kit, the 2 40 kid in a 360 kitten.

All that, but it wasn't included with this.

So, basically, as long as you make sure that it's tilted back in your filling this and get as much of the air out as possible, which will happen naturally.

Air wants to be free, doesn't want to be under pressure.

So as the water's filling air is being pushed out, and even though it's only happening through one port, as long as you don't seal it off with a tube and you use like a funnel or a squeeze bottle or something that fits down inside there and air content out, then it's a heck of a lot easier now.

The front manifold, like I said, not only serves as a nice aesthetic piece, it's obviously very functional, so all the bits connect to the manifold to the radiator, both tubes to manifold block.

Too many fold GPU to the manifold.

The only fans air in this system, though, So I'm really kind of curious as to how well this is gonna perform or the exhaust fans on the top.

What?

You're obviously three Ikea Vardar RGB fans, So the bottom is filtered.

It's a magnetic filter down down here as well.

Kind of sliding it around.

Or is it?

There it is, So this.

It's down here magnetically, So you are filtering air coming in.

So that's enough talking about it.

Let's go ahead and fire it up.

Let's get some benchmarks running to some temperatures and let's see what it's all about.

One thing I didn't get to see in Denver, where they built it off it went, and I didn't get to actually play with it.

So today we get to do that.

So I've had Super physician running the 10 80 p extreme.

Which case you're wondering is more stressful than four K optimized.

We're sitting about 48 C right now, and it's been running long enough to saturate the loop.

This is exactly out as it was set out of the box I've touched in the over clocks, haven't touched any fan curves and the fan is for fairly non aggressive in terms of the fan curve I get right next to it.

You so can hear, like, the noise floor.

So, yeah, that's how quiet this is.

But this would definitely be one of those situations.

Where is certainly acoustic optimized, but as you can see, still doing a fantastic job.

Fantastic job with keeping it nice and cool while being quiet.

You can see we just hit 49 but also to the air conditioner in here Turned off.

So that's going to go up and down a couple of degrees based on the ambient temperature here.

So if you go ahead and exit this test, we can take a look at our chart right here.

49 is where it sort of capt out.

You can see our CPU temperature obviously, was not under any real load.

It was in the forties because his loop is nice and hot right now.

What we're gonna do is we're gonna go ahead and jump immediately into prime 95 small.

So this is not a realistic situation in terms of how much heat your computer is gonna be generating, But What will tell us is kind of what the maximum capacity of this system is going to be like.

Four attempts immediately shot to 81 82 seventies 80 70 80 79.

The fans have definitely kicked up versus before.

So we're gonna do right now is we're gonna let this run for about 10 minutes, See where the temperature sort of equalized.

And I think we'll see those temperatures come down as a whole.

Blam, blam!

Well, it didn't really change a whole lot, actually.

The the loop here are the particular court I got 2 83 came down has been bouncing between 80 and 81 now.

So a couple of degrees, we're running a 4.6 gigahertz, which is the all core turbo boost clock for the 969,700 K.

So everything's running pretty good here.

Um, cores are all under load.

Were kind of wondering if maybe one of these cores might've been throttling.

Cause away every now and then drops down like you see right there.

And none of the other cores did that.

So with a TV max of 105 we are way under that even when we're doing a very unrealistic test that would never come anywhere close to what the actual main day to day use, it is gonna be like, I want to run this one more time now with just blend, which is kind of all of the above, which would be a more realistic tests.

So it's sitting in the fifties and sixties, which is much more realistic.

Obviously, as you can see, it has no problems whatsoever with, uh with temperatures as I wouldn't have expected it to.

With a 97 100 K and a single GPU with a 360 red.

I never did a review of the dynamic 011 from Lian Lee, obviously the dare Bauer edition to think they're all there, Baron said.

They designed the case, but Ikea water blocks obviously has handled all of the cooling for this chassis and all the assembly and stuff with their fluid gaming.

Siri's, I guess, said there's three models of this.

The X 601602 and 603 This is clearly the 603 of the top of the line.

This is this is kind of the best you can get right now, at least with the current hardware in the current year that we're in.

I kind of think that the best value, though, if you don't know the truth, is gonna be the X 601 Because if you take a look at that, the only thing that's different, it's the same storage.

It's the same amount of Ram.

It's the same kind of ram, the G skill and all that has the same 500 Goodbye, NDM.

Psst!

But you sacrificed the 20 of the 9700 k for 9600 K and you sacrificed the 2080 which is non ti I for a 10 70 t i and the price.