Name: テスラのティアダウン!- モデル3にレッカーヒッチを取り付ける! (Tesla Teardown! - Install a Tow Hitch on a Model 3!)
Uploaded: 2021-01-14T09:42:48.000Z
Duration: 10 min 23 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

So we have the Model 3 hooked up to this 1700 pound trailer. That is not my Model 3 so I'm

程度の副詞

So Tesla's are some of the coolest cars on the planet. But, allowing a car to accomplish

more things is always a good thing. Today we're going to install a hitch on the Tesla

Model 3 that will allow it to tow, carry bikes, and just be an all-around more productive

So this isn't my Model 3, obviously. It took me a second to find someone brave enough to

[Ben] Whoa, whoa, whoa. Hey. Wait a minute. Tear down?

[Zack] This is Ben from Teslanomics. He has a whole channel dedicated to the economics

of Tesla vehicles. Why do you want a hitch on your car?

[Ben] Well, I think that these cars are beautiful, but they are not as functional as they could

be. So adding this hitch is going to give me a whole new capability of, you know, carrying

bikes around, and little things like that. And while the Tesla's aren't rated to tow

anything yet, we did see a performance model that was pulling something recently. So I

thought this was just a great way to get that same functionality without having to buy an

[Zack] That's true. And the thing that I like about this hitch is that it does nothing to

change the aesthetics of the vehicle. You can't see it's there when it's installed.

It's totally hidden – 100%. Let's go around to the back of the car and show you how to

Alright, so we have to get this hunk of metal behind the bumper inside of this Tesla. So

we're going to tear off the whole back end to get it installed, but it's not as hard

as it sounds. This is called the Eco Hitch – I'll have it linked down in the video

description. This video is not sponsored. But this thing has a towing capacity of 2,000

pounds, and a tongue weight of 200 pounds.

Now, obviously, like we mentioned before, Tesla's not actually rated to tow stuff. But

at the same time, Tesla's are super powerful vehicles with electric motors and, you know,

large batteries inside. So it's not like it's going to hurt the car to throw a couple bikes

on the back or to tow a trailer every now and then. It's probably not the best idea

to put like a mobile home behind this thing. But, you know, 2,000 pounds is 2,000 pounds.

You nervous yet? Alright, for this little plastic piece over the top of the light, this

little guy is kind of hard to unscrew and we don't want to scratch it up because the

Tesla is kind of nice. So we're going to take these pliers with a cloth over it and then

grab it and twist it like that because the pliers are longer than your hands are. And

once it's started, it will come off the rest of the way.

Let's keep going. Alright, so there are 2 little plastic pins on the inside that you

just pop off this top and then the whole thing collapses inside allowing you to pull the

whole contraption out from underneath, allowing this felt piece to pull away, giving us access

to the taillights. And then to pull the taillight out, there are 2 bolts holding it in and both

Alright, after those 2 nuts are released from the bolts, the whole thing comes away. There

are 2 little pins: one here and one here. And the way that they're shaped, they go inside

these little plugs. So just a little bit of force pops the whole light out of the housing.

So the other...the passenger taillight is the same way. It has those 2 little nuts inside.

And then hopefully...yep, same 2 little clasps right here. So now the taillights are out

[Ben] So we've got these 2 pushpins that hold this side of the bumper into the wheel well

And then just one torque screw that holds it all together.

[Zack] Okay, so we are underneath the Model 3 right now and there are...these are all

10 millimeter bolts. There are 3 over here on this end and we're moving this bottom plastic

plate. And then there are 2 more clips right here on the very end right next to the bumper.

And these can be pulled down with just a screwdriver popping out this plastic piece and then you

have full access to the bolts right there. So let's pull off this plastic chunk.

Remember, throughout this whole process it's probably a good idea to keep your screws organized,

as with any project. There are 2 more bolts up here at the top of the bumper underneath

where those headlights used to be. And by headlights, I mean taillights.

So the bumper itself is all made of plastic and it's got these little clasps right here.

So I'm going to unclip all of these. [Snapping sound] Oh! This isn't my car! And then all

of the rear sensors on the bumper are attached to this little guy. And then the whole thing

comes out. Looks like Ben's been collecting rocks under here for a little while. You been

taking this thing off-roading? Where have you been going buddy?

[Ben] Ha ha! I've just been jumping it, you know!

[Zack] And this is what a Tesla looks like without the whole bumper or taillights. How

are you feeling about not having your car in one piece anymore, Ben?

[Ben] Ha ha! I feel alight. I'm a little worried about the Ikea nature of the assembly, but

I know where to go if we lose any of these parts.

[Zack] Those plastic push pins are impressive.

[Ben] Yes! You know, get some cinnamon rolls while you're there. It's cool.

[Zack] Okay, so all the plastic bumper stuff is off. There's this metal piece right here

called the crash bar, and there are 3 bolts on either side. Three where Ben is at, and

then 3 right here inside of these little holes. And each of them are 15 millimeters. And then

the whole crash bar pulls up and away from the frame.

So this is the hitch right here, and you see how it has this sloping plate? The car also

has a sloping plate. So this piece of metal right here, we actually take off and discard.

We don't need it. But to access this metal, we have to remove this. And these are all

10 millimeter bolts, and there are 5 of them. One here...two...three...four...and five.

[Ben] I'm just going to pull this clip off, and you just set it inside.

[Zack] Man, this is pretty brutal. So these are the same 15 millimeter bolts all the way

around this. And once they are all off, we don't need this piece of metal anymore because

the slope is included on the actual hitch itself. Alright, so you remember that piece

we just pulled off and discarded? There are these little plastic washers that are included

with the kit that we're going to put on each one of these little bolts, and that's to keep

the 2 metals separate from each other. And it could be for vibrations, to minimize them,

or it also could be because 2 dissimilar metals fusing together is a thing and we don't want

So the white washers go on these bolts as well as the 3 bolts right here on the mount

itself, and that's where the crash bars installs once the hitch is on the Model 3. Perfect.

So now the hitch is installed on the back of the Model 3. This part right here is removable.

I'll show you that in a second. And all of these nuts are tightened down to 50 pound

feet of torque. So the thing with torquing down all of these bolts to the 50 foot pounds

of torque is so that the torque wrench, right when you hit the right amount of torque, it

will do this clicking thing. [Click sound] Right there. And that's when you know when

to stop, and the nut is tight enough on the bolt. Then the crash bar attaches right onto

the hitch itself, with the white washers between it and the hitch to prevent that corrosion.

So the crash bar is also installed now, and each of the nuts holding it in place are also

torqued down to that same 50 foot pounds of torque that the base hitch was torqued down