Name: スカンクワークスはこんなにいい感じだったことはありません。 (Skunkworks NEVER looked this good - Personal Rig Update Part 2)
Uploaded: 2021-01-14T09:42:33.000Z
Duration: 18 min 41 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

um, so this is gonna be a different kind of video today.

It's like the old days before that guy works for board.

That guy for that guy worked for me, all right?

Phil's got work to do on a different edit.

So we're gonna do things old style here, using my old Sony Handy cam where I am going to be doing some of them in 1928 stuff.

So just looking description below and you got to find a link.

So, as you can see right here, we've got the in 1928 I'm sorry about the audio.

Is gonna sound kind of crappy, but this is literally how I used to get back in the day.

So we've got the in 1928 completely disassembled.

We've got the motherboard trade back here, fans and stuff out because we're gonna be painting all these parts where Howie said the finish on here is terrible.

How the finish is so rough that just handling it looks like that's Skins E.

And when you make amazing stuff, please fire whoever's doing all the coding for your stuff.

I guess we're going to be putting the CPU block and the CPU in the motherboard.

I was thinking about kind of marking where some of the past, your fittings, they're gonna go.

I'm gonna be passing fittings through the motherboard trade like I did with Skunk Works.

The problem is, I'm not entirely ready to do that yet, so I'm gonna probably have to do it after the fact.

Which means I could take a chance of chipping and nicking the paint and then having to touch it up.

I think we're gonna have to take the reason why I'm not doing it today when I don't have my step.

At least not all the ones that I need until it's all reassembled.

I'm not sure exactly where everything's gonna have to go, so that's what we're gonna do today.

But I could take the motherboard out because I could put the CPU and stuff in there without it inside the case.

But I do think that we're gonna have atleast two tubes coming through the top right here and into the CPU block.

I kind of want it all to be separate, I think, but drilling anything before I know where I want the loop to be is just a bad idea.

I'm telling you right now, one of the best things you can do if you have a build like this, has a lot of parts you need to set aside that you're so big Tupperware tubs like this so that you could set your parts in there, go looking for them because you lost them.

I've done this very thing any kind of sudden but losing them.

But I've lost so many small parts, especially screws and stuff, which is also why I have these magnetic tins when I'm working on things so that I don't lose the screws and make sure they're all nice and flat next they don't fall out.

So these are all the screws from the tear down.

Last thing I wanna do is be losing these.

So those are also going in there the motherboard out and prep this because we are gonna be painting it.

I said a 1,000,000 times is the simplest way to mod.

It's one of the cheapest things you could do for Ma Ding.

We painted those tubes in that last build, and I said before that I don't like the idea of painting tubes and stuff.

The other thing I did in preparation for this is I cut out all of the fan filters because these are on the exhaust under the air's coming up through this so I don't want to block off the air flow for air, to come out of the radiators and through the top.

Actually, that's that would have pictures.

You can see here is no perfect prime example of why I'm doing this pain.

In fact, if you go and look at in one's own website like their own video about the in 1928 there's grease all over it.

There's fingernails, scratches because, literally, I'm never gonna stop harping on this until they decide toe upgrade their energizing quality.

It is the worst on the market, some of the best design cases in terms of aesthetics and just being different.

But the worst finish when it comes to the actual aluminum parts, not the out the outsides.

But the crow are the core, the main parts of the bill.

You can also see here on the motherboard.

Trey, how I've got multiple pieces still attached.

That's because I don't want to necessarily take some of these pieces apart, get paint buildup, and then where they won't go back together nearly as tight or it flushes.

So because this piece, the bottom piece and all that are gonna be saying together we're gonna get a nice even coat all of it, and I can't get to stand up.

It is gonna cover up like the pain is gonna cover up some of the screws and stuff.

But I don't plan on taking this apart like this particular piece, so I'm okay with that.

So to prep it, we're just going through a kind of scotch writing.

We're just going through a scotch writing all of the surface to get off Needed like fingernail.

I might actually be on there and just give a better promotion Cartesian when it comes to the team that's gonna be going on here.

But once you do that, you have to wipe it down because there's going to be able to pick it up on camera.

Starts eating my fingers were there, left behind.

And for that, we're gonna be using that high pressure PC blower thing that I've had for a while.

And if we need to wipe it down, I've got these painting white flops that are designed to sort of pick up all of that debris and loosen up the circus.

字幕リスト動画再生

スカンクワークスはこんなにいい感じだったことはありません。 (Skunkworks NEVER looked this good - Personal Rig Update Part 2)

stuff

sort

gross

texture