Name: 2人のアホがトラックのエキゾーストを取り付ける！ (Two Idiots Install a Truck Exhaust!)
Uploaded: 2021-01-14T09:42:24.000Z
Duration: 14 min 23 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

程度の副詞

Just two cents here, and we're gonna do something we haven't done in a while.

It's available now dot com slash tasty sense.

Don't take my word for it is obviously I can't do this ad.

So just looking description below and you guys find the link.

So I have got you guys are aware if you were following on social media and you would know that I got a new 2019 Ram rebel that I've already done a little few things to you.

That 35 inch NATO rich grapplers leveled all that sort of stuff, Canaan and take.

But what we're missing most of all besides this guy in the channel.

You guys have constantly been like what happened to him.

And then my knucklehead dog is acting like he works for car stuff.

So we're also filming this with cell phones.

So I apologize for the quality because we moved into this new house and I cannot find my my camcorder, my small camcorder.

So we are gonna be doing an exhaust system on the truck today.

Borland was awesome enough to sponsor this video by sending me to exhausts because I couldn't make up my mind between the S type or the attack.

The attack is significantly louder than the S type.

So when do today is I'm going to install the attack first because I wasn't sure if the attack would be to attack e of your ears.

Well, let's say Nikas ears and my fist is the truck we didn't want it to be, too.

We're gonna kind of take you along for the ride of taking the stock exhaust out of the truck, which, fortunately, does not require any sort of cutting because, uh, ram, unlike other, every every other domestic brand.

And yes, I'm gonna call it ran because it is its own separate brand.

Now it's no longer actually technically a dodge.

They bolted in the exhaust like the awesome way you should do it rather welding everything in.

And if that's too loud after break in, then we'll put in the s type, which is basically the exact same procedure.

So, in fact, I think it's only the muffler section that's different.

It's what you say that's called into the truck.

And, uh, yeah, we'll go from there also to, uh, put links in the description below to the actual exhausted we're putting in.

But if you kind of just following along its part number 140753 BC from Bora.

Theo, Those five inch tips for her sup girl, you want help?

You see, It's two and 1/2 inch coming out of the exhaust or out of the muffler.

branch going in like Chewbacca or Subaru through makes this down.

So this is the stock muffler right here will be on bolting that flinch to bolt ledge, and then it will come out all the way to the rear.

We're not gonna get much done today with Calvary.

So obviously the first thing we have to do is get ourselves a sound comparison.

The other thing, too, though, is this Exhaust is supposed to be pretty anti drone like drone free, which is what I'm kind of excited to see because I want the noise, but not the intrusion.

All right, so there's a bolt up here in Flanders.

The pastor side, the driver's side is not That is a solid piece.

All the way to the tip, so that's gonna be a bit of a pain to get out.

I'm almost feeling like I want to just hack saw that kid out.

I know I said, we don't have to cut, but even the manual said this could make it easier.

I like easy way easier than the first time because we weren't doing it to in the morning because we got the driver's side off.

We got the hangar off with a little bit of, uh, Phoebe Blast.

You're kind of a deal with the spray lubricants.

Now we're taking off this tip, which, because it's just a bit more room where we're dealing with things.

It's just like a sounds like a band here, more like a ball joint ball band.

Also recommend taking down this fair and unhooking the end links.

We're gonna see if we can do it without doing that because you know me and manuals, right?

Fill in my mouth, round things around thinking Wait, why, using that with Power Virgin?

I don't know that it's the fact that the spread this had to spread the lips open up here on top.

It's a weird position because, said the bolt facing down, it's facing up.

I feel like they could have flipped this 11 80 put the Bulls on the bottom.

字幕リスト動画再生

2人のアホがトラックのエキゾーストを取り付ける！ (Two Idiots Install a Truck Exhaust!)

stuff

sort

ridiculous

awesome