Name: 古いラジエーターをCHEAPのための真新しい外観にする方法! (How to make an old radiator look brand new, for CHEAP!)
Uploaded: 2021-01-14T09:42:15.000Z
Duration: 14 min 43 s
Description: VoiceTubeの動画で発音を聞きながら英語表現を覚えよう！学べる英語：

程度の副詞

That's why today we're gonna show you how to refurbish it.

I show you howto recondition a radiator and make it look like new again.

But why don't you guys recondition your Internet security by using Nord VPN?

Our phones are tablets are computers most of the time are online.

It means we're connected to who knows what servers and data is traveling through, who knows what nodes and who knows who's spying on your data's.

That's why a virtual private network is a must in today's day and age.

Nor VPN as they have more than 5000 servers across 60 countries in all regions of the world, which means no matter where you are or where you're traveling to or from, chances are there is a fast server for you to connect you.

But the best thing about nor VPN is it's available on all of your devices, including your handheld devices.

So when you're traveling and connecting to free WiFi, it coffee shops, hotels, airports, train stations, no one can spy on your data.

These military grade encryption send it up to the server and then out to the Internet from the server, and the same thing happens when you receive packets back on your device.

So start taking your Internet as serious as we take computer building around here and protect it.

There's no reason why you guys should be surfing the net naked, which is exactly what you're doing when you're surfing without a VPN.

In fact, right now my users can get 75% off a three year membership and a month for free by using the Africa OJ's two cents at checkout.

That's J Y Z T W O C E N t s not not the number two people.

So when we were doing the ice challenge over clocking beef, blah, blah, blah last year earlier this year, whatever year it was, we used this particular 480 millimeter read from Ikea to submerge in our ice bucket or are cooler or whatever he is.

But the problem with this is the fact that since we left it submerged, we've got all kinds of rust has formed on here as you can see on this side.

But some of the screw holes screws, air completely rusted.

This was straps I used to attach two of them together.

We're gonna do here is normally this would look like a throwaway.

I mean, look at all the discoloration right here.

The chips, The fens aren't so bad on this side.

But if we look at the other side, you can see a lot of the fins or smash.

And that's just because we pour in the ice.

And so the ice would hit it and kind of smash it down.

You can see is a lot of oxidation discoloration happening here.

So this is typically the kind of radiator someone would probably look at.

But today I'm gonna show you kind of the methods.

I used to take these radiators and make them like new again because the red like this is a about $100.

So just tossing this and buying another one isn't very necessary.

But also to this one thing you should know there are different types of rads out there.

Like these air aluminum fins was a lot of different ways that radiators were made.

So in this particular instance, this is going to apply to the red that I have.

But you just need to know that your mileage may vary and the tools are gonna be using here.

My trusty I fixit kit that my wife got me, um, linked to this down description below every time I show it, I want people to use kids like this not just because, you know Amazon affiliates, but because this has every bit you could possibly need.

And then this is kind of the, um the more advanced kit, which also has Theoden inal tools that you would use to replace the screen on a phone.

But they come very handy when it comes to computers and stuff.

So I'm gonna be using these angled very fine tweezers.

I'm also gonna be using this kind of a staid just to help make the Finns nice and straight.

We're gonna be using some again our engine enamel, because we're gonna be we will be painting the fins as well.

But because all the paint room be doing is cosmetic on the outside, this won't have any effect on temperatures.

You guys gonna argue in the comments if you want?

If it matters, if you paint the fins, I have painted plenty of radiator fins, different colors, or even back to black and never seen any sort of a heat issue where it's insulating and having less transfer of heat.

And then we've got sandpaper because we do need the sand off like the buildup of oxidation and just make the smooth and ready to accept Can't.

All right, so now we're adding another tool to the mix.

This is just a deal, Walt drill, which is?

Even though they were submerged, they still got wet.

So all right, so to take this off, you just have to kind of wiggle it out.

I looked like something I just pulled out of a junk yard.

So now we're gonna go ahead and straighten out the Finns.

So because when the fence take impact, this sort of smashed flat you want to be impatient with this, you're just gonna take the tweezers and you just gonna kind of squeeze them back to straight again.

This is the part that's gonna take the longest and be the most tedious Teest.

It's also gonna be the most trying on your patients.

Your rad's gonna be visible like it's hanging in your case with the fans above it, and this is gonna be visible.

Then you obviously want to take your time to do this right.

You can also get creative with your own method.

If you guys have a way of doing this that you think is better and faster than please, by all means sound off.

I'm sure there's someone watching this video who works in a radiator repair shop might even have a proper tool for this role.

I know Phil actually just had a really good question.

You said, Are you pinching and pulling up?

I said, No, I'm not pulling it all because these air just these air so fine and the way that they're attached in Stoddard to the Rose, you could easily just pull the thin right out.

I'm just pinching and then twisting to kind of make it straight.

And as you're doing this, you might notice some might break free from the row.

Some of these probably never even adhered to the road.

The right way to begin with, which you have to understand, is that these air never going to look perfect.

In fact, they don't even come out of the box.

In between each one leaves fins is a long, thin piece of metal that all the things attached to a cz Well, not just the road, but right here got smashed down just a little bit.

So we're always gonna have a little bit of a dent right here.

But I think overall, given what we started with the way it looks now, this is obviously way better than it was before.

And then in terms of airflow, though, you can see right through it.

Yeah, you could see right through you like you can see through the entire radio.

Hey, look, um, Georgie, also to his wanna mention point of painting this part right here.

These tanks you also don't want to grab it like that.

So I'm not gonna worry about pretty ing up these tanks because member, they have these pieces that cover it.

I'm gonna spray paint this off, not put together.

Because obviously, if we don't, if we want this be a different color or something, Then when it's not all assembled, we can make it a nice, uh, nice clean peace rather than having like, masking lines and stuff.

But you don't want it s o to get paint on the edge right here.

字幕リスト動画再生

古いラジエーターをCHEAPのための真新しい外観にする方法! (How to make an old radiator look brand new, for CHEAP!)

stuff

sort

bunch

nasty