The guy's Js you sense here and we're gonna do a small form factor.

Build something I haven't.

I think the last small form factor, Bill, it was probably the Loki ghost s one case, and that was pretty frustrating.

But this has a whole different goal in mind.

Raising a whole different chassis all off the shelf parts, no custom water cooling or anything like that.

Just to see if we can't build a badass gaming rig.

Because takeover Clocking reliability to the next level with the new Z 3 90 dark motherboard from E V G A Z 3 90 Dark is built for extreme over clocking utilizing features such as a 10 layer PCB, 17 phase power delivery triple bios and 100 50% more gold content mean you get more of what you need to build the ultimate Intel based PC to learn more about the C 3 90 Dark in its world class features visit E v g a dot com.

I wanna start today's video by giving a huge thank you to micro center who supplied some of the parts you see here today and sponsored parts of today's video.

So if you guys want to learn more about micro center and what you where they are located near you.

They're all over.

The United States have got some of the best combo deals and prices you could possibly get for computer components.

You wanna find links to what we use for micro center in this build and learn more about their store.

Please click the link in the description below huge partner for us.

I cannot be more excited than having this partnership with them.

So again, Thank you, Michel Centre.

Now, in terms of the parts that start with the chassis, because when you're dealing with I t X builds, this is the single most important thing we are using.

And I know it's not a new chassis.

See, not all builds need to be using the something brand new.

It's gotta be something that just came out because relevance last longer than a couple of minutes.

You know, this is the evolved shift.

Now they have a new shift coming out, and I thought this would be kind of a good opportunity to build something in this, even though they're getting ready to release a slightly newer version of this where the glass panels on the side are being replaced by fabric panels, kind like a speaker grill almost to allow better cooling for air cooled systems.

Now we are gonna be trying to do duel a iose in this.

You know, it's possible I've seen pictures even mentioned in the manual, but that's gonna obviously make things a lot tighter in here.

But I think if we can at least deal with a iose in this, it'll give us better cooling than just choking it off of the glass side panels and not waiting for the air version.

Besides, it's kind of like sticking close to my heart at water cooling.

But I mean, there's always debates on whether not Iose are truly water cooling, although they're filled with liquid and they use a heat exchanger pump to move that fluid.

But apparently they're not water cooling, but they also have a shift X version, which is quite a bit taller.

It's like almost 23 inches tall, whatever that translates to in centimeters and millimeters.

But I speak American meters before you guys start throwing things at the computer going.

But I thought rising to was the best ever 9900 k.

The reason why we did that is because we want high clocks for shooting for that five gigahertz plus probably won't get it on a single 1 20 a Iot, but we're shooting for five gigahertz.

And because this is a primarily gaming centric build, we know that the 9900 k and its superior clock speeds versus the new rising to stuff is gonna give us benefit here in this particular scenario, not to mention have other plans for i t x on x 5 71 seat 39 50 comes out.

So there will be I t X small form factor stuff for a m D with a whole separate purpose and goal.

Can anyone say mobile workstation slash editing rig that can also play games for the motherboard?

We are using the RG strict Z 3 90 I gaining.

The reason I went with this motherboard is I've used it in two other projects.

This is actually what's inside our locate Ghosts s one case has been extremely solid.

It's got lots of functionality room for two dot in dot to plenty of fan headers, argue beheaders.

The whole deal.

It's also the same motherboard we swapped into our course there.

One, if you mess, Remember that video?

So it's treated us well, and we're going to continue using it because of that, keeping our system cool.

If we can fit all of this, I'm gonna be trying for dual Iose.

Yes, th 60 is probably not gonna get us to five gigahertz under 9900 K.

But when you're dealing with small form factor, even a 1 20 millimeter, a Iot is gonna be better than a lot of low profile air coolers.

Especially in this chassis that doesn't have the mods and the extra panels on the side.

They're gonna make it better for air cooling.

So we are going with a Iot for the 9900 K power supply DVDs sent over their G 6 50 or 6 50 gm, which is a fully modular SFX power supply.

Because this is not an A t X power supply.

16 gigabytes of G skill tried an RGB 3200 c l 14.

So it's fast memory.

It's got very tight timings, and you can overcome this memory very easily to 3600 and beyond, but because we're dealing with a gaming PC, we wanted to go with 32 gigs dual 16 gigabyte sticks.

But the cost to reward on that is, if this were like an editing rig, then for sure, we'd probably try and put 32 gigs in here.

But we think 16 of fast memories.

Plenty for gaming storage.

This is where you can quickly fill up your chassis when it comes to I t X builds, you're dealing with Saito drives and Seita cables and extra I t X Power State of Power cables.

Then it can easily start to get cluttered.

That's why we chose to just go with the Intel s SD six.

This is a two terabyte N v m e m dot to SST.

No, it's not PC Jen for that where we'd be on a name be billed to utilize all of that speed, but it's a single m 0.2 that's gonna allow us to not have to have any extra cables for our storage.

And given the fact that this is a gaming PC, we think that two terabytes of fast or just more than enough if you need more use an external and then for graphics.

Even J sent over one of the R T X 2080 super hybrid cards.

This is based off of the, uh, reference PCB, but it is water cold will allow us to maintain better clocks.

And even though it's going to get a little bit on the warmer side, being in this chassis it's still better than choking off an air cooled card even more so.

That's our goal.

Here is both of these.

A Iot is fitting in this chassis, and we're in trying Make it pretty here with some cable mod RG bees that are or a sink compatible.

The irony because we're using an A C s motherboard, but they'll work with Mystic Light, all that sort of stuff, too.

So what you guys say we start building it.

Are there any answers?

I'll wait.

That's better.

All right.

So the first thing I tend to do when I'm building a small form factor stuff we know we're gonna be able to put the CPU and the motherboard, and in this case, CME dot to also in the motherboard.

We need the plan a little bit here.

So we've got to tear down our chassis.

The shift, this pretty dope.

Actually, I feel like this chassis is where now I know.

Course.

Their got their inspiration for the They're they're one.

Of course.

They're one Chessie.

Very, very similar.

And this came out first, but I grass, You know how many did it to support any claims there that was still screwed in those air tight, man, It's like a car panels when you first take him off, how?

They're super like it's like they're gonna break.

Okay, so because we are using another SFX power supply, it's gonna relocate it.

So we use this guy amounts right there.

Looks like it's gonna be like it's a little door that flips up and down to cover wires and stuff to make it look better.

Okay, so now that that is prepared, I'm I want to use different fans in this.

The only fan this comes with a single 140 millimeter exhaust.

But because I'm gonna be putting a fan down here in the bottom and a Iot here, another a Iot here bringing air in.

I'm debating, also making this an intake and then just having all positive pressure in here.

It's gonna be working for its intake.

I can tell you that like, would be knee is And I bet you they already exist.

There was a website that made custom panels for the evolved that had, like, extra milling in them and then had a grill behind it.

I bet you they make them for this, which, if they do in you're watching like you did last time.

Email me.

Let's get this 1 40 off of here.

I feel like we need to get that 1 40 replaced with the higher static pressure.

Higher rpm fan.

Phil and I kind of agree that in a built like this, it's okay for it to not be silent.

It's not gonna be silent.

It probably shouldn't be silent.

You should be having functionality and cooling person.

Foremost J functionality was important.

You wouldn't be going with the chassis like this to begin with.

Well, we like it.

So this is actually my first time personally unboxing one of these.

My friend had a bill using a dedicated his wife on box it.

Here's your decor.

Hey, go thing like you climactic now.

Normally, this is when I would say, You should always do a test boot of your stuff.

Um, we're not doing that today.

You just gotta trust that it all works.

But you really should set it all up, like on the box plugging the power supply and Cebu and all that stuff just to make sure it works.

We don't go through all that effort just to have it go.

Aw, mobile photo sounds very Star Wars E Join the Republic.

We have doughnuts on Saturday.

Now, some people might look at this angle, but that's not in the newest SST is a gimmick like we're gonna scoff at two terabytes of m dot to envy.

Emmy NAND, huh?

That's right, A Zeus.

You like to make me have to put on the little screws going mount my motherboard.

It's more.

But this cheese like that, it's gonna look good.

Man, I I'm finding myself.

Although I'm about to do another a new personal rage for me and bring stumper, expect to the studio permanently.

I find myself just so intrigued.

I t x build.

They always look so good.

I love how there's like there's no dead space.

Although dead space is good for cooling.

It's just there's nothing here that, like everywhere you look, it's a components and it's a brick of computer parts and it's more powerful than yours.

Motherboard is installed.

Go and do kill porn now because I forget later.

No, I don't really savor that.

Did little good is oh, dude new die knowing so cute I want to squeeze it We have to try and do as much routing up front as we can cause like once these parts start going in there, man, it's not gonna be any opportunity to do it again.

So this this little guy, it's done.

I can't even imagine the design like revisions that go into a 90 X case.

Like how many times it's been changed, been revised, even that just that little past due right there to get my screwdriver in there, Right?

Someone on cad somewhere probably didn't have that until they went to do like their first Pittman testing.

And they're like, Oh, I need a screwdriver in there and they're like, Well, we have the whole there, you know?

I mean, now is the hard part, right?

Can I fit both a iose?

That's That's the thing that I'm most concerned about.

Like I said, I've seen it done a bunch of times.

So no really reason why I couldn't wait.

Yeah, I do.

It's me the reason why the fan has to go in the bottom.

It's because the height of fan and radiator in the top won't leave us enough room for the fan and red right here.

So I don't wanna mess up our thermal paste, so I'm gonna put some tape around that.

Hold it on.

So the idea here I looked around.

It's fan here, read like this.

The course there won't be straight up and down, but whatever.

That's just that's just Oh, see the thing that has to be gotten over there.

So we have someplace we could leave it there, fan cable there.

We're gonna do now before I actually mount the cooler because I still have to mount the Ram and all that sort of stuff.

I don't want any of this in the way.

Let's go into our groups card.

See how much room we have there?

No, Like I said, this is the DVD a 2080 super hybrid.

It's based off a reference PCB so not the prettiest card, in my opinion.

But that's okay, because in this chassis amounts backwards like that.

So what you're gonna end up seeing is the back plate.

The only thing that kind of sucks about this is we have won a Iot with braided Perigord braided tubes and one, This is rubber.

This is almost like, Dude, how much time have I spent planning this build?

I'm starting to think all this planning time was actually well spent.

I feel prepared for this build.

Wow.

Well, so do you want to get because that way, E.

I don't want to say anything right now because it's going to be good.

I'm concerned.

I feel like that's the most tasty sex thing, though, is that we're worried when it's going right.

We're never works when something's going wrong, because that's part now, where it gets closest, and this is true for every card is look at the gap for the power plugs right there in the fan, so I might even have to dismount that card to get it in there.

In fact, a lot of people have said you have to run a slim fan to get it to fit, But I've already seen, like, I can push the cart out a little bit like that.