Placeholder Image

字幕表 動画を再生する

  • hello, I'm going to show you how to make a paper origami Crane and

  • What I'm gonna do different in this tutorial is I'm going to use highlighters to

  • Emphasize and illustrate each crease so it's just gonna be a little bit easier

  • step-By-step for and maybe the first time or if you're new to do an origami so first you're gonna need either origami paper or

  • Printer paper that you can make into a square and which we want to do to do that is basically take

  • this corner and fold

  • It down

  • along that Edge and then take a pair of scissors and

  • Cut the excess paper off just like that

  • And then when you open it back up

  • You have a perfect square, and then this is going to be the first of your fold you're going to want to do

  • So I'll go ahead and illustrate this one

  • On the next slide this fold you're going to take the other corner and two

  • And fold it the other way

  • Just like that

  • And then now you want to flip it over

  • And you're going to fold it now into in half the other way

  • to basically two rectangles

  • And then you'll want to do it the other way as well

  • So now on this side

  • now have a folds basically going the other way and

  • Then once you get to this point. You're Gonna want to

  • Tilt it like that and these two folds right here

  • It's going to kind of naturally want to come together, and you want to fold along those edges and bring these two points

  • Inward down to the bottom and then when you do that at the top

  • Hold those crease down just like that, so then now you have the square basically. They're kind of like four

  • little triangular flanges coming out, and then you want to always keep the

  • flaps on the bottom

  • And then now for the next step

  • once you get that creased real good if you want to take this corner right here this edge and

  • Match along the center crease you have right here

  • basically just fold these in

  • And then once you do that flip it over and do the same thing on the other side

  • I'm going to go ahead and illustrate those for you and actually there's one more thing one. So you get those folded on both sides

  • And the step isn't necessary, but I like to do it as an extra

  • Step is when you take the top part right here

  • And give it just a little bit of a crease on top and that'll help help guide a fold later on

  • Then you want to go ahead and open up all four sides. I'm going to illustrate all these for you

  • You'll fold their fold and fold

  • down

  • Right there and the crease we did

  • Right on top and so now

  • Go ahead and illustrate the unit side

  • fold

  • Just like that, so you have folded like this

  • And when you did that also full of the inside which then what you want to do is take this bottom flap?

  • and push it up and

  • Crease it right there where this fold is and then on the two inside creases basically fold those in

  • Crease the bottom and then just kind of let this fall together

  • into a crease just like that and then flip it over and

  • Do the same thing and then you're gonna want to take this and Kinda. Just give it a little bit of crease the other way

  • And open it up now along these two folds right here. Oh

  • Fold those in and let this all just kind of fall together. Just like that crease it real good

  • And once you have that you'll see the split part down at the bottom. I'm gonna keep that there and

  • now what you're going to want to do is take the

  • Corner Edges and this right here and fold it in to the center. Just like this

  • get on both sides

  • It looks just like that

  • Then fold it up. I'll flip it over and do the same two folds just

  • Like that so it looks like that

  • Well, then now you don't want to take

  • the two flaps

  • pinch them together

  • At the same time pinch the other two together, so you're basically just

  • inverting what you have and

  • You'll get what looks like this and then from there look I already see a little bit of a crease right here

  • Go on to fold up

  • these parts on both sides flip it over fold it up there at the bottom and

  • then now

  • Basically invert it again so pinch these two together and pinch the back two together just

  • Like that so then you'll get this and then down at the bottom fold these over to get your wings

  • Same thing on the other side

  • And now you can see you have the wings and the last second last step we want to take these and along this edge

  • right here, basically just kind of pull them out and

  • Then pinch it and refold it right along that edge

  • Same thing on this side

  • then last step I'm gonna take the four the head basically push this down and

  • pinch it in

  • Just like that and there you have it you have a origami Crane

hello, I'm going to show you how to make a paper origami Crane and


動画の操作 ここで「動画」の調整と「字幕」の表示を設定することができます

B1 中級

どのようにペーパークレーンを作成するには。折り紙で簡単にステップバイステップ (How To Make a Paper Crane: Origami Step by Step-Easy)

  • 29 0
    Pedroli Li に公開 2021 年 01 月 14 日