Placeholder Image

字幕表 動画を再生する

  • Gorilla got new jacket with cap and two brothers exhaust with juice box

  • Left oem slip-on is easy to remove

  • Unscrew mount bolt and clamp bolt

  • Install two brothers slip-on

  • First tighten VALVE, after canister clamp and pipe clamp

  • On the right side you have to disconnect Exup system

  • Servo motor is under the seat

  • Disconnection of exup doesn’t cause any error on this model

  • Install two brothers slip-on

  • First tighten VALVE,

  • after canister clamp and pipe clamp

  • To plug in juice box you should remove tank and air box

  • Remove side fairings

  • Before removing the tank disconnect all wires and hose

  • To remove air box disconnect sensors

  • Loosen the clamps on the flaps

  • Unscrew mount bolt

  • Disconnect all hoses

  • Unplug the stock wiring harness from each of the four injectors

  • Route the harness towards the front of the bike along the left hand frame tube

  • Attach the Juice Box Pro connectors to each injector and connect black and stock connectors

  • The sequence of the connection can not be confused, because all connectors have different lengths for a specific injector

  • Thus the controller cuts between the injectors and the stock wiring

  • Similarly connect throttle sensor

  • Attach the ground wire from the Juice Box Pro to the common stock ground wire

  • After juice box installation should not be any errors

  • Going in reverse order

  • Choose the map in juice box

  • In this case it’s second map for two brothers slip on and OEM air filter

  • Two brothers slip ons look nice, have good sound and increase power

  • Subscribe if information was interesting!

Gorilla got new jacket with cap and two brothers exhaust with juice box

字幕と単語

B2 中上級

Two Brothers Exhaust & JBP Installation Z1000

  • 151 0
    ikn0wc001   に公開 2017 年 10 月 06 日
動画の中の単語

前のバージョンに戻す