字幕表 動画を再生する
-
Here's how to connect your AirPods to a MacBook.
ここでは、Macブックにエアポッドを接続する方法をご紹介します。
-
These steps will work for any generation of AirPods.
これらの手順は、どの世代のエアポットにも対応しています。
-
Open your AirPods case like you would when connecting your iPhone.
iPhoneを接続するときと同じようにAirpodsケースを開きます。
-
Click the volume icon on your Mac in the menu bar on the top of your screen.
画面上部のメニューバーの「出力デバイス」の下にあるMacのボリュームアイコンをクリックします。
-
Under output device, select AirPods.
AIRPODSを選択します。
-
If this method doesn't work, you need to enable a few different settings.
この方法がうまくいかない場合は、いくつかの異なる設定を有効にする必要があります。
-
Go into system preferences. Make sure your Mac is logged into the same Apple ID as your iPhone by clicking Apple ID.
あなたのMacが同じリンゴのI Dにロックされていることを確認してください。Apple I Dをクリックして、あなたのiPhoneとして。
-
And checking for your iPhone on the devices column on the bottom left. Then make sure that "hands off" is turned on by clicking general.
そして、一般をクリックしてチェックマークをクリックすることで、ハンズオフがオンになっていることを確認する左下のデバイス欄でiPhoneをチェックします。
-
And clicking the check mark next to "allow hands off between this Mac and your iCloud devices".
次に、このMacとiCloudデバイスの間で手を離せるようにします。
-
Finally, if your volume icon isn't in the menu bar click "Sound", then click the check mark next to "Show volume in menu bar".
最後に、音量アイコンがメニューバーにない場合は、「サウンド」をクリックし、「メニューバーに音量を表示」の隣にあるチェックマークをクリックします。
-
If you're trying to connect your AirPods to a Mac, but don't use them on an iPhone, you can do this by opening your AirPods case with your AirPods still in it.
MacにAirpodsを接続しようとしているが、iPhoneでは使用していない場合は、Airpodsのケースを開いたままの状態でAirpodsをプレゼントすることで、これを行うことができます。
-
Press and hold the button on the back of the case until the status light starts to flash white.
ケース背面のボタンをステータスになるまで押し続けます。
-
On a generation one AirPods case you can find the light inside the case.
Generation one Airpodsのケースに光が白く点滅し始める。世代でエアポッドにケースの中の光を探すことができます。
-
On a generation two and AirPod Pros the light is in front of the case.
長所だ
-
On your Mac open "System preferences"
Macのケースの前にライトがついています。
-
Click "Bluetooth". On the list of Bluetooth devices you'll find your AirPods, double click to connect.
システム環境設定を開きます。
-
If your AirPods still aren't connecting, remove them from the list by right clicking and clicking "Disconnect" and pair them with the Mac again.
Bluetoothデバイスの一覧からBluetoothをクリックします。エアポッドをダブルクリックして接続します。
-
If nothing else works, reset your AirPods by holding the button on the back of the AirPods for at least 15 seconds.
それでも接続できない場合は、右クリックしてリストから削除してください。接続を解除して、再びMacとペアリングします。
-
Let go when the light turns amber and try these steps again.
他に方法がない場合は、エアポッドの背面にあるボタンを15秒以上押し続けてリセットしてください。